| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 510 x 460 x 560 mm | |
|---|---|---|
| tabletop thickness | 25 mm | |
| pedestal stem diameter at narrowest point | 80 mm | |
| base footprint diameter at floor | 380 mm | |
| undertable clearance height | 520 mm | |
| tabletop longest edge radius | 255 mm | |
| base edge fillet radius | 40 mm | |
| finish coat total thickness | 0.2 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| static tabletop load capacity | 113 kg | |
|---|---|---|
| net product weight | 14 kg | |
| surface stain resistance rating | 4 (5scale) | |
| finish abrasion resistance cycles | 2000 | |
| base tip-over threshold angle | 18 degrees | |
| recommended static load duration | 24 hours | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop core | 18mm medium-density fiberboard | |
|---|---|---|
| tabletop coating | High-gloss white polyurethane lacquer | |
| pedestal stem material | 2mm thick drawn steel tube | |
| pedestal base plate | Cast aluminum weighted core with glossy white paint | |
| joint hardware | Zinc-plated steel M8 connecting bolts | |
| base bottom pads | 3mm thick non-slip felt pads | |
| coating UV stabilizer content | 0.5% additive ratio | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| assembly requirement | 3-piece bolt-together assembly with included hex key | |
|---|---|---|
| floor protection | Felt base pads prevent scratching hard floors and catching carpet fibers | |
| surface utility | Smooth non-porous top supports drinks, reading materials and small decor | |
| stability design | Wide flared weighted base eliminates wobble on plush carpet surfaces | |
| cleaning method | Non-abrasive wipe-clean surface requires no special maintenance | |
| placement adaptability | Zero overhanging legs allow positioning flush against walls or sofa sides | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| shipping carton dimensions | 560 x 510 x 610 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| living room placement | Position beside armchairs or sofas for drink and accessory storage | |
|---|---|---|
| bedroom use | Serve as a minimalist nightstand for small bedrooms | |
| lounge area application | Place in reception or waiting areas for guest convenience | |
| small space suitability | Ideal for studio apartments where floor space is limited | |
| style compatibility | Matches mid-century modern, minimalist and Scandinavian decor schemes |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
