| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 450 x 300 x 635 mm | |
|---|---|---|
| Tabletop thickness | 38 mm | |
| Under-table vertical clearance | 597 mm | |
| Base dimensions | 400 x 250 mm | |
| Support post cross-section width | 40 mm | |
| Tabletop overhang beyond support | 350 mm | |
| Table corner radius | 75 mm | |
| Base thickness | 15 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 8.4 kg | |
|---|---|---|
| Tabletop static load capacity | 36 kg | |
| Recommended static base load | 80 kg | |
| Surface stain resistance rating | Grade 2 | |
| Frame corrosion resistance | 1000 hours | |
| Minimum warranty period | 365 days | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm E1-grade MDF core | |
|---|---|---|
| Tabletop finish | Matte white polyurethane coating | |
| Support frame construction | 1.5mm thick powder-coated steel tube | |
| Base plate material | 2mm thick powder-coated solid steel plate | |
| Frame-to-base welds | Continuous MIG welded joints | |
| Base foot pads | Non-marking 5mm TPE rubber pads | |
| Finish coating thickness | 60 micron powder coat | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Slide-under design | Base fits under 600mm deep standard sofa and bed frames | |
|---|---|---|
| Tabletop use cases | Supports drinks, snacks, laptops, remote controls and small decorative items | |
| Floor protection | Four non-slip rubber pads prevent floor scuffing and unwanted sliding | |
| Assembly requirement | Knock-down assembly requiring top attachment to frame | |
| Surface maintenance | Sealed finish wipes clean with dry or damp cloth, no specialized cleaners needed | |
| Placement flexibility | Fits beside sofas, armchairs, beds and home office seating | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room seating areas | Slides under sofa seats to hold drinks, snacks and remotes without occupying floor space | |
|---|---|---|
| Bedroom bedside use | Fits tight beside beds for books, phones, table lamps and nighttime essentials | |
| Home office work nooks | Sits beside task chairs to hold laptops, notebooks and office supplies | |
| Small apartment spaces | Minimal open-frame design avoids visual clutter in studio and compact living spaces | |
| Senior living and accessibility | Accessible over-seat surface reduces reaching for users with limited mobility | |
| Commercial lounge areas | Suitable for office breakout rooms, waiting areas and hotel guest seating |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, performance reference for static load | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability test reference applicable to adjacent table use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate and finish | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to steel frame and base structure | |
| GB 18584-2001 | Indoor decoration material limits of harmful substances for wooden furniture, applicable to MDF substrate |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate and finish; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to steel frame and base structure; 3. GB 18584-2001: Indoor decoration material limits of harmful substances for wooden furniture, applicable to MDF substrate; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
