| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Carcass Panel Thickness | 25 mm | |
|---|---|---|
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| 2-door cabinet unit net weight | 38 kg | |
|---|---|---|
| Top shelf static load capacity | 30 kg | |
| Recommended service life | 8 years | |
| Surface abrasion resistance | 2000 cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer cabinet frame | Dark gray melamine-faced particle board | |
|---|---|---|
| Lower door panels | Brown diagonal textured melamine-faced MDF | |
| Horizontal fluted trim | Dark gray ribbed ABS decorative strip | |
| Top edge trim | Rounded dark gray PVC edge banding | |
| Internal shelving | 18mm thick matching particle board with PVC edge banding | |
| Door hinges | Cold-rolled steel concealed soft-close hinges | |
| Base plinth | Powder-coated dark gray steel support strip | |
| Open shelf surfaces | Matte dark melamine finish, stain resistant | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Enclosed door storage | Hinged doors swing open 110 degrees to access full lower cabinet interior | |
|---|---|---|
| Open shelf organization | Two-tier open upper storage holds frequently accessed items without door opening | |
| 3-door model shelf division | Vertical middle divider splits middle shelf into two separate storage zones | |
| Top display surface | Raised perimeter lip prevents small items sliding off flat top surface | |
| Soft-close door operation | Concealed hinges provide 5-second soft close to eliminate slamming noise | |
| Adjustable internal shelves | Shelf supports allow 32mm incremental height adjustment for flexible storage | |
| Floor-standing installation | Plinth base sits directly on level floor without wall mounting required | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Executive office side placement | Positioned beside executive desk for document and supply storage | |
|---|---|---|
| Open office tea station use | Placed in pantry area for cups, tea supplies and reading materials | |
| Reception area display storage | Used behind reception desk for brochures, decor and visitor supplies | |
| Small meeting room storage | Installed along meeting room wall for meeting materials and equipment | |
| Home office side cabinet | Used in home workspaces for office supplies, books and personal items | |
| Corridor temporary storage | Placed in office corridors for frequently used public supplies |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
