Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1200 × 400 × 840 mm
Top gallery rail height	50 mm
Upper open cubby section height	240 mm
Individual open cubby internal width	560 mm
Open cubby internal depth	360 mm
Lower double-door section height	500 mm
Individual door panel dimensions	560 x 500 x 18 mm
Door handle diameter	20 mm
Base plinth height	50 mm
Door panel edge band thickness	1 mm
Central cubby divider thickness	18 mm
Carcass side panel thickness	18 mm
Carcass Panel Thickness	25 mm
Back Panel Thickness	9 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Product net weight	45 kg
Top surface static load capacity	50 kg
Door hinge cycle rating	80000 open/close cycles
Recommended maximum user weight for top surface	50 kg
Anti-tip anchor required load rating	45 kg
Surface scratch resistance rating	2N
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles
Anti-tip Fixing Reference	Products above 1200 mm should use at least 2 wall fixing points

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Outer cabinet frame	18mm thick engineered particleboard with dark matte painted finish
Lower door panels	18mm thick MDF core with light oak grain melamine veneer
Central cubby divider	18mm thick engineered wood with teal matte painted accent finish
Back panel	3mm thick hardboard with dark matte finish
Internal shelves (lower cabinet)	16mm thick laminated engineered wood, fixed position
Top gallery rail	18mm thick engineered wood with dark matte painted finish, runs full perimeter of top
Door knobs	Zinc alloy with dark matte finish, 20mm diameter round design
Door hinges	Cold-rolled steel concealed soft-close hinges
Top surface	18mm thick engineered wood with light matte laminate finish, wear-resistant
Base plinth	18mm thick engineered wood with dark matte painted finish, full width support
Edge Band Thickness	2 mm
Primary Connector Specification	Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Lower cabinet storage access	Two hinged swing doors open 110 degrees outward for full access to internal storage space
Upper open storage	Two equally divided fixed cubbies for open display and frequently accessed items
Top surface containment	Full perimeter raised gallery rail prevents small display items from sliding off top
Door operation	Small round knobs on each door allow easy grip to open and close cabinet doors
Internal shelf configuration	One fixed horizontal shelf divides lower cabinet into two equal storage zones per door
Freestanding installation	Floor-placed unit requires wall anti-tip anchor installation for safety in high-traffic areas
Surface maintenance	Matte laminate and painted surfaces wipe clean with dry or lightly damp cloth
Door alignment	Concealed hinges include 3-way adjustment to align door gaps evenly during assembly
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Dining room use	Placed against dining room wall to store tableware, linens and display serving decor
Living room use	Used as a compact credenza below wall art to hold media accessories, books and decorative objects
Home office use	Positioned against office wall to store files, office supplies and display desk accessories
Entryway use	Placed in entry foyers to store keys, mail, entry accessories and display decorative items
Small apartment use	Compact 1200mm width fits small urban spaces without overwhelming room layout
Light commercial use	Suitable for small office break rooms, cafe service areas to store supplies and display items

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 14749:2016	Domestic and kitchen storage units and worktops safety requirements, applicable for structural stability
EN 312:2010	Particleboard specifications, applicable for engineered wood panel performance requirements
EN 13986:2004+A1:2015	Wood-based panels for construction, formaldehyde emission classification applicable

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for cabinet structural stability
GB/T 4897-2015	Particleboard specification, applicable for engineered wood carcass panel performance
GB 18584-2001	Indoor decoration material formaldehyde emission limit for wooden furniture, required for indoor air safety

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for cabinet structural stability;
2. GB/T 4897-2015: Particleboard specification, applicable for engineered wood carcass panel performance;
3. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wooden furniture, required for indoor air safety;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · SB-GR2D2C-8450

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · SB-GR2D2C-8450

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · SB-GR2D2C-8450Open Export Tool

Quick Actions

Post an RFQ

Product Description

This two-tone freestanding storage sideboard, model SB-GR2D2C-8450, is a versatile unbranded storage cabinet designed for balanced display and concealed storage across residential and light commercial settings. Visually, it features a deliberate two-tone palette: a dark matte painted engineered wood frame contrasts with light oak-look melamine veneer on lower door panels, accented by a central teal matte divider between upper open cubbies. A 50mm tall raised gallery rail runs the full perimeter of the light matte laminate top, framing the display surface while preventing small items from sliding off the edge. The upper section holds two equally sized fixed open cubbies, each sized to hold frequently accessed or decorative pieces, positioned above the lower double-door storage zone for clear visual balance. Built for consistent daily use, the cabinet uses durable engineered wood substrates throughout: 18mm thick particleboard forms the outer frame and gallery rail, 18mm MDF core panels make up the lower doors, a 18mm teal-painted engineered wood divider separates upper cubbies, a 3mm hardboard back panel encloses the rear, and 16mm thick fixed laminated engineered wood shelves divide the lower cabinet interior. Cold-rolled steel concealed soft-close hinges support the doors, which are fitted with 20mm round dark matte zinc alloy knobs for easy grip. The doors swing open 110 degrees outward to grant full access to lower storage, where a single fixed horizontal shelf splits each side of the cabinet into two equal storage zones. The top surface supports a 50kg static load, each internal shelf holds 30kg of distributed weight, and hinges are rated for 80,000 open/close cycles. Matte laminate and painted surfaces wipe clean easily with a dry or lightly damp cloth for simple upkeep. The unit measures 1200 x 400 x 840 mm overall, weighs 45kg net, and requires mandatory wall anti-tip anchor installation for safety in high-traffic areas. It fits seamlessly against dining room walls to hold tableware, linens, and serving decor; works as a compact living room credenza under wall art for media accessories, books, and decorative objects; stores files and office supplies in home offices; organizes keys, mail, and entry items in foyers; and supports small apartment layouts with its space-efficient footprint. It also suits light commercial settings including small office break rooms and cafe service areas for supply storage and display. For procurement, note that each unit ships across multiple cartons with a total packaged gross weight of 100kg and 0.65m³ packaging volume, requires 40 minutes of assembly per set, and includes all necessary hardware for standard installation.

Two-Tone Freestanding Storage Sideboard with Raised Gallery Rail and Upper Open Cubbies Specifications

Suppliers and stock