| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Large body height | 340 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Recommended total set weight | 48 kg | |
|---|---|---|
| Large table distributed top load | 50 kg | |
| Small glass table distributed top load | 25 kg | |
| Pedestal floor load concentration | 42 kg per base | |
| Suitable simultaneous users | 4 users | |
| Glass impact category target | Tempered safety glass | |
| Top surface service temperature | 60 degrees C | |
| Surface level tolerance | 2 mm across 900 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large marble-look top | White engineered stone-look panel with gray veining and polished finish | |
|---|---|---|
| Large cylindrical body | White painted engineered-wood or MDF body with continuous vertical fluting | |
| Fluted surface finish | Smooth matte white paint or laminate over machined vertical ribs | |
| Small tabletop | Amber-tinted transparent glass with a smooth polished circular edge | |
| Small pedestal column | White painted cylindrical support with a smooth vertical face | |
| Small pedestal base | Round white painted base plate with a slightly raised foot rim | |
| Top-to-body trim | Thin matching white edge band or painted rim around the circular top | |
| Bottom protection | 2 mm non-marking floor-protector pads recommended under both bases | |
| Panel thickness target | 18 mm for the fluted body substrate and 20 mm for the marble-look top | |
| Fasteners and joinery | Powder-coated steel or zinc-plated internal connecting hardware recommended | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
| Nested layout | The smaller glass table overlaps the large circular table to form a layered two-level display and serving area. | |
|---|---|---|
| Independent repositioning | Both tables are separate freestanding pieces and can be pulled apart for sofa-side or corner use. | |
| Primary serving surface | The 900 mm low table provides the main area for trays, books, remote controls and drinks. | |
| Raised accent surface | The 500 mm amber glass top creates a visible elevated zone for a lamp, vase or sculptural object. | |
| Floor support | Each table uses a centered pedestal structure, leaving open perimeter space and avoiding four corner legs. | |
| Storage provision | No drawer, shelf or hinged compartment is present; the cylindrical fluted body acts as a fixed enclosure. | |
| Cable management | No cable port or power module is fitted, so the set is intended for non-electrified decorative serving use. | |
| Cleaning access | The two separate tables can be separated for vacuuming and wipe-down access around the circular bases. | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Total packed volume | 0.703 CBM | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Modern living room | Place in front of a three-seat sofa where the layered circular tops support drinks, books and decor. | |
|---|---|---|
| Lounge and reception seating | Use beside modular lounge seating to create a soft contemporary guest waiting area. | |
| Apartment or condominium show suite | Select for staged interiors where the white fluting and amber glass provide a compact luxury focal point. | |
| Hotel executive lounge | Use in low-traffic seating clusters requiring decorative surfaces rather than heavy utility storage. | |
| Small meeting breakout area | Pair with four lounge chairs for informal conversation, magazines and refreshments. | |
| Bedroom sitting corner | Position near an accent chair or chaise for a lamp, fragrance accessory and reading material. | |
| Recommended flooring | Suitable for hard floors or low-pile carpet with protector pads; verify stability on uneven carpets before use. |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
