| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (Queen size) | 1524 x 2032 x 305 mm | |
|---|---|---|
| Top sleep surface usable width | 1474 mm | |
| Top sleep surface usable length | 1982 mm | |
| Side panel fabric height | 305 mm | |
| Edge radius at corners | 50 mm | |
| Quilted stitch repeat (zigzag pattern) | 75 mm | |
| Side carry handle spacing | 610 mm | |
| Label placement offset from corner | 305 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total product weight (Queen size) | 50 kg | |
|---|---|---|
| Static total weight capacity | 454 kg | |
| Per-sleeper weight capacity | 227 kg | |
| Firmness level | Medium Firm | |
| Foam density (comfort layers) | 25 kg/m³ | |
| Coil count (Queen size) | 660 | |
| Coil wire gauge | 13.5 gauge | |
| Cover fabric abrasion resistance | 30000 cycles | |
| Limited warranty period | 10 years | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top sleep cover | Quilted white knit polyester fabric | |
|---|---|---|
| Side panel fabric | Textured woven polyester upholstery | |
| Quilt comfort layer | 25D convoluted wave foam padding | |
| Comfort transition layer | 20mm high-density polyurethane foam | |
| Support core | Individually pocketed tempered steel coils | |
| Edge support system | Reinforced high-density foam perimeter rails | |
| Side carry handles | Reinforced fabric webbing loops | |
| Bottom backing fabric | Non-slip non-woven polyester fabric | |
| Stitching thread | High-tenacity polyester thread | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Motion isolation performance | Individually wrapped pocket coils reduce cross-bed motion transfer | |
|---|---|---|
| Edge support functionality | Reinforced perimeter rails prevent roll-off and extend usable sleep area | |
| Carry and positioning | Integrated reinforced side handles support two-person lifting and rotation | |
| Base compatibility | Fits platform beds, slatted bases, box springs, and adjustable bed frames | |
| Unpacking recovery time | 72 hours | |
| Rotation recommendation | Rotate 180 degrees every 3 months for even wear | |
| Moisture management | Breathable knit cover allows air circulation through coil core | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedrooms | Queen size fits standard queen bed frames for two adult sleepers | |
|---|---|---|
| Guest bedrooms | Medium-firm support suits a wide range of guest sleeper preferences | |
| Hotel standard guest rooms | Durable hybrid construction withstands frequent residential/hotel turnovers | |
| Adjustable bed base installations | Flexible coil and foam construction bends with adjustable base articulation | |
| Slatted platform bed frames | Works with slat spacing up to 75mm per standard mattress support requirements | |
| Rental property furnishing | White neutral finish and durable build suit long-term rental installation |
EU Market Access Requirements* EN Standards
| EN 1957:2012 | Applicable European standard for mattress test methods for functional performance |
|---|
Standards applicable to China-market projects
| GB 18401-2010 Category B | Applicable safety standard for direct skin-contact textile products, covers formaldehyde and pH limits | |
|---|---|---|
| GB/T 26706-2011 | Applicable standard for flexible polyurethane foam for furniture, covers foam performance requirements |
This product must meet the following technical requirements: 1. GB 18401-2010 Category B: Applicable safety standard for direct skin-contact textile products, covers formaldehyde and pH limits; 2. GB/T 26706-2011: Applicable standard for flexible polyurethane foam for furniture, covers foam performance requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
