| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 2000 x 300 mm | |
|---|---|---|
| Pillow-top comfort layer thickness | 50 mm | |
| Pocket spring core height | 190 mm | |
| Quilted top panel thickness | 10 mm | |
| Side border height | 300 mm | |
| Vent/tuft indentation spacing | 150 mm | |
| Edge support foam width | 70 mm | |
| Corner radius | 30 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Net weight | 49 kg | |
|---|---|---|
| Static weight capacity | 227 kg | |
| Pocket spring coil count | 660 | |
| Spring wire diameter | 2.4 mm | |
| Quilted foam density | 25 kg/m³ | |
| Support foam density | 30 kg/m³ | |
| Memory foam layer density | 60 kg/m³ | |
| Rolling durability cycle rating | 50000 cycles | |
| Edge static load rating | 113 kg | |
| Full expansion time after unpacking | 72 hours |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top cover fabric | Beige stretch polyester knit, quilted construction | |
|---|---|---|
| Side border fabric | Textured woven polyester fabric, stitched reinforced seams | |
| Top tufted/vented panel | Quilted polyester wadding and soft foam pad | |
| Pillow-top comfort layer | Multi-layer polyurethane soft foam and wave foam | |
| Spring core | Individually wrapped tempered steel pocket coils | |
| Edge support | High-density polyurethane foam encasement | |
| Identification labels | Woven fabric tags sewn to side border | |
| Stitching seam pitch | 25 mm | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Motion isolation | Individually pocketed coils limit cross-surface movement transfer | |
|---|---|---|
| Breathability | Vented recesses across top panel and porous knit cover improve air circulation | |
| Edge support | Reinforced foam perimeter prevents edge sag when sitting near mattress sides | |
| Compressed packaging compatibility | Vacuum compressed for reduced shipping volume prior to unpacking | |
| Surface firmness | Medium plush comfort level from layered foam and spring support | |
| Cleaning suitability | Spot-clean only fabric cover to prevent damage to quilted layers | |
| Noise reduction | Individually wrapped coils minimize spring squeak during position changes | |
| Zoned support | 5 comfort zones align with body pressure points for spinal alignment | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential bedroom use | Fits standard queen-size bed frames for master or guest bedrooms | |
|---|---|---|
| Hotel guest room use | Meets mid-tier hotel bedding durability and comfort requirements | |
| Adjustable bed base compatibility | Flexible pocket spring construction works with powered adjustable bed frames | |
| All sleeper position suitability | Zoned medium-plush support works for side, back, and stomach sleepers | |
| Platform bed frame use | Works directly on slatted platform beds without separate box spring | |
| Commercial hospitality furnishing | Suitable for serviced apartment and short-term rental furnishing projects |
EU Market Access Requirements* EN Standards
| Domestic bedding flammability standard | EN 597:2015 | |
|---|---|---|
| Furniture durability test standard | EN 1957:2012 |
US and Canada office-furniture standards
| Contract mattress durability standard | ANSI/BIFMA X2021 | |
|---|---|---|
| Furniture load test standard | ANSI/BIFMA X2017 |
Standards applicable to China-market projects
| Mattress flammability standard | GB 20400 | |
|---|---|---|
| Spring mattress durability standard | GB/T 26706 | |
| Formaldehyde emission limit | GB 18587 |
This product must meet the following technical requirements: 1. Mattress flammability standard: GB 20400; 2. Spring mattress durability standard: GB/T 26706; 3. Formaldehyde emission limit: GB 18587; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
