| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (Queen size) | 1800 x 2000 x 280 mm | |
|---|---|---|
| Pillow top comfort layer thickness | 50 mm | |
| Support core thickness | 230 mm | |
| Corner radius | 50 mm | |
| Tufting grid spacing | 200 mm | |
| Side border height | 230 mm | |
| Seam width between pillow top and core | 8 mm | |
| Edge support width | 70 mm | |
| Minimum under-bed clearance required | 200 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Net product weight | 60 kg | |
|---|---|---|
| Static load capacity | 500 kg | |
| Recommended user weight per sleeper | 150 kg | |
| Firmness rating | Medium (6/10) | |
| Spring coil count (queen size) | 960 | |
| Spring wire diameter | 2.0 mm | |
| Comfort foam density | 25 kg/m³ | |
| Fabric abrasion resistance | 50000 cycles | |
| Expected structural lifespan | 10 years | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top sleeping surface fabric | 400g/㎡ white knitted polyester ticking | |
|---|---|---|
| Pillow top filling | 40mm high-elastic polyurethane foam + 10mm glue-free cotton padding | |
| Support core unit | Independent pocketed innerspring coils encased in non-woven fabric | |
| Perimeter edge support | High-density foam encasement | |
| Side border fabric | Textured woven polyester border fabric | |
| Tufting fasteners | Polyester twine tufts securing internal layers | |
| Isolation layer between foam and springs | 60g/㎡ non-woven fabric pad | |
| Bottom surface fabric | Non-slip woven polyester base fabric | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Internal layer stabilization | Uniform grid tufting secures all upper comfort layers to prevent shifting | |
|---|---|---|
| Edge seating support | Reinforced foam perimeter provides consistent support when sitting on bed edges | |
| Motion isolation | Individually wrapped pocket coils reduce cross-bed motion transfer for undisturbed sleep | |
| Breathability design | Knitted ticking and woven side border promote air circulation to reduce heat buildup | |
| Surface compatibility | Fits standard slatted, platform, and adjustable bed frames without additional foundation | |
| Maintenance requirement | Rotate 180 degrees every 6 months to equalize wear for extended lifespan | |
| Unpacking expansion | Reaches full thickness within 72 hours after unpacking if vacuum roll-packed | |
| No-flip design | Single-sided sleep surface eliminates need for regular flipping | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions (compressed roll pack) | 400 x 400 x 1900 mm | |
|---|---|---|
| Gross shipping weight | 65 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedroom | Queen size suitable for couples as primary sleep surface in standard bedrooms | |
|---|---|---|
| Hotel guest rooms | Durable medium-firm design suitable for high-turnover hospitality accommodation | |
| Apartment rental furnishing | Neutral white finish and standard sizing fit most rental property bed frames | |
| Adjustable bed base setups | Flexible innerspring construction works with motorized adjustable bed frames | |
| Guest bedroom use | Balanced comfort works for occasional guests with varying sleep preferences |
EU Market Access Requirements* EN Standards
| EN 1957:2012 | Test methods for mattresses and bed bases, functional performance measurement |
|---|
Standards applicable to China-market projects
| GB 18401-2010 Category B | National safety technical code for textile products, direct skin contact class |
|---|
This product must meet the following technical requirements: 1. GB 18401-2010 Category B: National safety technical code for textile products, direct skin contact class; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
