| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2060 x 2360 x 1300 mm | |
|---|---|---|
| headboard padded thickness | 100 mm | |
| slat surface to floor height | 330 mm | |
| underbed clearance height | 200 mm | |
| mattress compatibility size | 2000 x 1800 mm | |
| headboard panel width per section | 1030 mm | |
| side rail upholstered thickness | 50 mm | |
| support slat spacing | 80 mm | |
| footboard height above floor | 380 mm | |
| center support rail thickness | 30 mm | |
| support slat count | 15 units | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| total static load capacity | 820 kg | |
|---|---|---|
| product net weight | 68 kg | |
| recommended mattress thickness | 300 mm | |
| upholstery abrasion resistance | 30000 cycles | |
| foam padding compression recovery | 90 % | |
| hardware joint static load | 150 kg per connector | |
| sleeper capacity | 2 adults | |
| limited warranty period | 1 year | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| headboard outer upholstery | Light beige faux leather (PU) | |
|---|---|---|
| headboard internal padding | 30mm polyurethane foam with polyester fiber wrap | |
| bed frame core structure | Plywood and MDF composite frame | |
| mattress support slats | Solid birch wood slats | |
| side rail upholstery | Matching light beige faux leather (PU) | |
| floor protection pads | Rubber non-slip feet under base | |
| connecting hardware | Zinc-plated steel bolts and brackets | |
| seam construction | Stitched upholstery seams with 30mm pitch | |
| tufting fasteners | Fabric-covered tuft buttons | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| mattress support system | Fixed solid wood slat base, no box spring required | |
|---|---|---|
| assembly requirement | DIY bolt-together assembly with included hardware | |
| structural center support | Full-length center rail with additional support legs | |
| headboard design | Fixed-height split two-panel tufted upholstered panel | |
| underbed access | Open low-profile clearance for cleaning access | |
| upholstery care requirement | Spot clean with mild soap and warm water | |
| floor protection feature | Non-marking rubber feet prevent hard floor scratches | |
| compatibility feature | Fits standard king size innerspring, foam or hybrid mattresses | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| master bedroom application | Suitable for residential master bedrooms with 12sqm+ floor area | |
|---|---|---|
| contemporary interior styling | Matches modern, minimalist and neutral bedroom design schemes | |
| residential domestic use | Designed for daily adult use in private homes, not heavy commercial use | |
| mattress pairing recommendation | Pairs with 300 mm thick quilted mattresses for proportionate styling | |
| hard floor suitability | Rubber feet make it suitable for wood, tile and laminate flooring | |
| nightstand coordination | Pairs with 600 mm tall bedside nightstands for aligned table height |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 1334:1996 | Domestic furniture - Beds and mattresses - Test methods for strength and durability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural frame validation | |
|---|---|---|
| GB 18584-2001 | Formaldehyde emission limit for interior wooden furniture, required for frame material testing | |
| GB/T 1952.2-2011 | General technical requirements for upholstered furniture beds, applicable to padded components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural frame validation; 2. GB 18584-2001: Formaldehyde emission limit for interior wooden furniture, required for frame material testing; 3. GB/T 1952.2-2011: General technical requirements for upholstered furniture beds, applicable to padded components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
