Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	490 × 483 × 470 mm
Seat width	420 mm
Seat depth	380 mm
Seat height	420 mm
Frame member thickness	30 mm
Underseat clearance height	220 mm
Floor contact point width	470 mm
Cushion thickness at center	80 mm
Frame top rail width	35 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Unit net weight	6.8 kg
Static weight capacity	150 kg
Recommended user weight	136 kg
Foam density	35 kg/m³
Foam rebound rate	45%
Frame static load rating	180 kg
Floor glide load rating per unit	75 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Side frame	12mm thick bent birch plywood, black matte lacquer finish
Seat upholstery	1.2mm thick white PU faux leather, stain-resistant wipeable surface
Seat core padding	High-density polyurethane foam, wrapped in soft polyester batting
Floor contact glides	Injection-molded black non-slip polyethylene pads
Seat retainer hardware	Zinc-plated steel screws, recessed into frame inner surface
Frame finish coating	Two-component matte black polyurethane lacquer, 0.15mm dry film thickness
Cushion base panel	6mm thick hardboard support panel, secured to frame
Upholstery seam stitch pitch	8 stitches per inch
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Cantilever support	Continuous bentwood frame provides flexible slight give under seated load
Seat cushion retention	Recessed mount within curved frame prevents lateral cushion shift
Floor protection	Bottom glides slide on hard floors without scratching finished surfaces
Low-profile seating	Compact backless design fits under vanities, consoles, or entryway ledges
Surface maintenance	Faux leather upholstery wipes clean with damp cloth for spill removal
Structural stability	Wide curved base eliminates tipping risk during normal seated use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Entryway use	Compact footprint fits narrow entry foyers for temporary shoe removal seating
Vanity table pairing	Low seat height aligns with standard vanity table under-clearance for seated grooming
Living room accent seating	Minimalist modern silhouette complements MCM or contemporary living room layouts
Bedroom footboard placement	Low height sits neatly at foot of bed for dressing seating
Small apartment use	Space-saving cantilever design works for compact urban residential units
Office break room use	Casual occasional seating for break areas or waiting nooks
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Domestic seating safety	EN 12520:2015
Upholstered furniture flame resistance	EN 1021:2014
Furniture surface durability	EN 12720:2009

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

General furniture seating safety	GB/T 3324
Upholstered furniture durability	GB/T 2012
Formaldehyde emission limits	GB 18584

Standardized tender description text

This product must meet the following technical requirements:
1. General furniture seating safety: GB/T 3324;
2. Upholstered furniture durability: GB/T 2012;
3. Formaldehyde emission limits: GB 18584;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CBW-AS-047

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CBW-AS-047

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CBW-AS-047Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Modern Cantilever Bentwood Upholstered Accent Stool (model CBW-AS-047, unbranded) delivers sleek, space-efficient occasional seating with a refined minimalist silhouette suited to a range of residential and light commercial settings. Its visual design centers on a continuous cantilever bentwood frame finished in matte black, paired with a crisp white padded backless seat, creating a streamlined profile that balances understated modern style with subtle structural visual interest. The compact form features a gently curved base that sits low to the floor, with clean, unadorned lines that align with mid-century modern and contemporary design schemes without cluttering visual space. The stool’s frame is constructed from 12mm thick bent birch plywood, coated in a two-component matte black polyurethane lacquer with a 0.15mm dry film thickness, with frame members measuring 30mm thick for consistent structural rigidity. The seat uses a 14mm bent plywood internal support board topped with a 6mm hardbase panel, holding a high-density 35kg/m³ polyurethane foam core wrapped in soft polyester batting for a plush 80mm thick central cushion, upholstered in 1.2mm thick stain-resistant white PU faux leather stitched at 8 stitches per inch. Recessed zinc-plated steel screws secure the seat assembly to the frame, while injection-molded black non-slip polyethylene glides cap the floor contact points. The continuous cantilever frame offers a gentle flexible give under load, with a 180kg frame static load rating supporting a maximum recommended user weight of 136kg, and a wide 470mm floor contact span that eliminates tipping risk during normal use. The recessed seat mount prevents lateral cushion shift, while the smooth glides slide across hard finished floors without scratching surfaces. The wipeable faux leather surface cleans easily with a damp cloth for quick spill removal, and the backless 420mm seat height fits neatly under vanities, consoles, and entry ledges for out-of-the-way storage when not in use. This stool fits narrow entry foyers for temporary shoe removal seating, aligns with standard vanity table clearance for seated grooming, works as a complementary accent seat in mid-century or contemporary living rooms, sits neatly at bed footboards for dressing use, supports small urban apartment layouts with its space-saving footprint, and serves as casual occasional seating in office break rooms or waiting nooks. For procurement, note that each unit ships in two cartons with 40 minutes of required assembly per set, with a packaged gross weight of 23kg per set, and plan loading volumes to accommodate 135 sets per 20GP container at 85% space utilization.

Modern Cantilever Bentwood Upholstered Accent Stool Specifications

Suppliers and stock