Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	400 × 400 × 450 mm
Round seat diameter	400 mm
Fixed seat height from floor	450 mm
Backrest height above seat surface	120 mm
Backrest wrap arc length	630 mm
Carry loop inner opening size	30 x 20 mm
Seat padding thickness	80 mm
Base contact diameter	380 mm
Contrast piping width	3 mm
Upholstery wall thickness around cylinder	20 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Product net weight (large variant)	5 kg
Recommended static user load capacity	150 kg
Seat foam density	35 kg/m³
Foam rebound rate	60%
Upholstery abrasion resistance	30000 cycles
Static stability floor load distribution	100% evenly spread
Seam stitching pull strength	80 N
Available color option count	4
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat and body outer upholstery	0.8mm thick matte PU faux leather, waterproof and easy-wipe
Two-tone variant back panel upholstery	0.8mm thick black PU faux leather with matching edge piping
Internal structural frame	15mm thick medium-density fiberboard, cylindrical support core
Seat and back cushion filling	High-density polyurethane foam, no sharp internal edges
Edge piping trim	1mm diameter PU-wrapped cord, aligned to all upholstery seams
Integrated carry loop	Same PU material as upholstery, stitched to top of back panel
Base bottom contact layer	2mm thick non-slip non-woven fabric, floor-protecting
Stitching thread	High-tenacity polyester thread, matched to upholstery color
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Stationary fixed seating	No swivel or height adjustment, direct full-contact floor placement
Integrated carry handle	Top-mounted fabric loop allows single-handed lifting and repositioning
Low curved back support	Partial rear wrap back provides light lumbar support during vanity use
Stain-resistant easy-clean surface	Smooth PU upholstery wipes clean with damp cloth for daily maintenance
Floor protection	Soft fabric base prevents scratches on hard wood, tile, or vinyl flooring
Stackable storage compatibility	Cylindrical form allows nesting for compact storage when not in use
Fixed non-tipping structure	Wide low center of gravity prevents tipping during normal seated use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Bedroom vanity area	Sized for seated use at standard 750mm high dressing tables
Entryway shoe changing zone	Compact footprint fits narrow entry spaces for temporary seating
Living room supplemental accent seating	Two-tone finish coordinates with modern minimalist soft furnishing schemes
Small apartment multi-use flexible seating	Lightweight portable design supports occasional use in limited space
Walk-in closet dressing area	Compact size fits narrow closet aisles for dressing assistance
Children’s bedroom auxiliary seating	Rounded soft edges eliminate sharp corner safety risks for home use
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Furniture – Seating – Strength, durability and safety requirements for domestic seating
EN 1021-1:2014	Upholstered furniture flammability – Ignition by smouldering cigarette

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to internal frame quality
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable to formaldehyde emission
GB/T 16799-2008	Technical specification for polyurethane artificial leather, applicable to upholstery material

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal frame quality;
2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission;
3. GB/T 16799-2008: Technical specification for polyurethane artificial leather, applicable to upholstery material;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · VST-CYL-045

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · VST-CYL-045

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · VST-CYL-045Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Cylindrical Upholstered Low-Back Vanity Stool with Carry Handle (model VST-CYL-045) is an unbranded backed upholstered seating piece designed with a clean modern minimalist aesthetic. Its core form is a smooth cylindrical seat paired with a low, curved partial wrap backrest that rises a short height above the seat surface, finished with a two-tone upholstery scheme accented by coordinated edge piping for a polished, streamlined look. An integrated carry loop sits flush at the top of the back panel, blending seamlessly with the upholstered exterior rather than protruding as a separate hardware element. Construction centers on a rigid internal frame built from medium-density fiberboard with a cylindrical support core, paired with a bent plywood internal seat support board, with no sharp internal edges. All seating surfaces are wrapped in 0.8mm thick matte PU faux leather; the back panel of the two-tone variant uses matching black PU, with all seams finished with 1mm PU-wrapped cord piping stitched with color-matched high-tenacity polyester thread. Beneath the upholstery, seat and back cushions are filled with high-density polyurethane foam, while the base features a 2mm thick non-slip non-woven fabric contact layer to protect flooring surfaces. This is a stationary fixed seating piece with no swivel or height adjustment, designed to sit directly on floors with full contact for stability. The top-mounted fabric carry loop enables single-handed lifting and repositioning, while the low curved back delivers light lumbar support during extended seated use. The smooth PU upholstery resists stains and wipes clean with a damp cloth for simple daily maintenance. Its wide, low center of gravity prevents tipping during regular use, and its cylindrical shape allows nesting for compact stackable storage when not in use. The soft non-slip base layer eliminates scratches on hardwood, tile, and vinyl flooring. The stool is well suited for a range of residential spaces, including bedroom vanity areas paired with standard height dressing tables, narrow entryway shoe changing zones, walk-in closet dressing aisles, children’s bedrooms where rounded soft edges reduce safety risks, and small apartments as flexible occasional seating. It also works as supplemental accent seating in living rooms, with its two-tone finish coordinating seamlessly with modern minimalist soft furnishing schemes. For procurement, note that each unit ships across two cartons, with an assembly time per set of 40 minutes. The lightweight design supports easy repositioning across spaces, while the durable upholstery and reinforced stitching hold up to regular daily use. Its compact footprint makes it a practical choice for layouts with limited floor space, and its stackable form simplifies bulk storage for both residential and small commercial settings.

Cylindrical Upholstered Low-Back Vanity Stool with Carry Handle Specifications

Suppliers and stock