| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Primary Component Thickness | 40 mm according to load-bearing role | |
|---|---|---|
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 18 kg | |
|---|---|---|
| Distributed tabletop load | 50 kg | |
| Concentrated edge load | 20 kg | |
| Single-leg downward service load | 35 kg | |
| Recommended users | 2 users | |
| Floor leveling adjustment | 0 mm | |
| Surface service temperature | 80 degrees C | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | Wood veneer or wood-grain finished panel over engineered board, 38 mm thick | |
|---|---|---|
| Edge treatment | Rounded wood-look edge banding or solid-wood lipping with polished lacquer finish | |
| Apron | Wood-finished structural rail, 130 mm high, forming a four-sided frame | |
| Support legs | Five fixed wood-finish legs with square tapered profile and arched cutaways at corner blocks | |
| Fasteners and joinery | Concealed wood knock-down or glued corner hardware with internal metal connector brackets | |
| Surface coating | Glossy clear lacquer or polyurethane wood coating |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Support configuration | Five fixed wooden legs transfer load from the perimeter apron to the floor, including a center rear support | |
|---|---|---|
| Service surface | 600 mm square flat top provides a two-person side table area for cups, documents, phones, or decorative objects | |
| Under-table access | 410 mm open clearance allows floor cleaning and limited seated leg room without drawers or doors | |
| Installation method | Floor-standing rigid assembly requiring leg-to-apron attachment and placement on level hard flooring |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception and lounge use | Place beside guest seating for documents, cups, and phones in reception areas, executive lounges, or meeting break zones | |
|---|---|---|
| Hospitality or residential side use | Use between two armchairs or beside a sofa where a fixed, non-storage table is preferred |
EU Market Access Requirements* EN Standards
| Safety requirements | EN 12521 applies to strength, durability, and safety requirements for domestic dining and similar tables | |
|---|---|---|
| Non-domestic table safety | EN 15372 applies to strength, durability, and safety for non-domestic tables if used in offices or hospitality | |
| Surface assessment | EN 12720 provides resistance-to-cold-liquids test methods for finished wooden furniture surfaces | |
| Wet-heat assessment | EN 12721 covers wet-heat resistance of furniture surfaces and can validate lacquer performance |
Standards applicable to China-market projects
| Dimensional and structural review | GB/T 3324 applies to general technical requirements for wooden furniture if this table is supplied to China | |
|---|---|---|
| Surface quality inspection | GB/T 3325 covers metal-coated furniture and is not primary; use GB/T 3324 wood furniture inspection for this wood table | |
| Formaldehyde emission control | GB 18580 applies to formaldehyde emission from engineered-wood components in the tabletop and substrate | |
| Mechanical test basis | GB/T 10357 series applies to table strength, durability, and stability testing during procurement verification |
This product must meet the following technical requirements: 1. Dimensional and structural review: GB/T 3324 applies to general technical requirements for wooden furniture if this table is supplied to China; 2. Surface quality inspection: GB/T 3325 covers metal-coated furniture and is not primary; use GB/T 3324 wood furniture inspection for this wood table; 3. Formaldehyde emission control: GB 18580 applies to formaldehyde emission from engineered-wood components in the tabletop and substrate; 4. Mechanical test basis: GB/T 10357 series applies to table strength, durability, and stability testing during procurement verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp