Red Lacquer Integrated Kung Fu Tea Brewing Table with Storage Cabinets and Drawers (model KT-RED-1800) is listed under Traditional Coffee Table, with overall dimensions of 1800 × 800 × 750 mm and main material of MDF. Load capacity: 150 kg. Certifications: Chinese,traditional,style,cabinet,base,integrated,tea,brewing,function,seated,use,design. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W*D*H) | 1800 x 800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 45 mm | |
| Seated knee clearance width | 550 mm | |
| Seated knee clearance height | 600 mm | |
| Central double-door cabinet internal dimensions | 600 x 450 x 500 mm | |
| End drawer internal dimensions (per drawer) | 350 x 350 x 150 mm | |
| Recessed tea drain tray dimensions | 600 x 400 mm | |
| Perimeter raised edge height | 15 mm | |
| Base foot height | 60 mm | |
| Open side shelf dimensions (above left drawer) | 350 x 300 x 200 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop static load capacity | 150 kg | |
|---|---|---|
| Surface water stain resistance | Grade 1 | |
| Indicative net weight | 120 kg | |
| Recommended seating capacity | 6 users | |
| Surface abrasion resistance | 2000 cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop and cabinet body | Solid hardwood with red lacquer water-based finish | |
|---|---|---|
| Tea drain tray | Slotted solid wood or composite stone insert | |
| Water boiler unit | Stainless steel heating element with plastic pump housing | |
| Hardware (handles, slides, hinges) | Brass-finish zinc alloy | |
| Support feet | Solid wood shaped feet | |
| Drain pipe fitting | Food-grade flexible plastic |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Integrated tea drainage system | Recessed slotted tray drains waste water via hidden pipe to under-cabinet bucket | |
|---|---|---|
| Auto water boiler system | Built-in electric pump draws water for boiling with push-button control | |
| Storage configuration | Central double-door cabinet, two end drawers per side, open side shelf | |
| Cable management | Hidden channel for boiler power cord routed to rear table edge |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Packaging carton dimensions | 1900 x 900 x 900 mm | |
|---|---|---|
| Gross packaged weight | 140 kg | |
| On-site assembly time | 30 minutes | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception area | Formal tea service for business guest reception, with integrated storage for supplies | |
|---|---|---|
| Private tea room | Dedicated space for traditional kung fu tea brewing for small group gatherings |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable to structural load testing | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids, applicable to lacquer spill resistance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural performance and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to formaldehyde and heavy metal content verification | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable if engineered wood components are used in cabinet construction |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural performance and finish quality; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde and heavy metal content verification; 3. GB/T 4897.3-2003: Particleboard for furniture use, applicable if engineered wood components are used in cabinet construction; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp