Traditional Rectangular Solid Wood Coffee Table (model CT-SW-RECT-1400) is listed under Traditional Coffee Table, with overall dimensions of 1400 × 770 × 520 mm and main material of MDF. Load capacity: 136 kg. Certifications: Traditional,style,Fixed,solid,wood,frame,Low-profile,table. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1400 x 770 x 520 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Apron height | 120 mm | |
| Leg cross-section | 50 x 50 mm square straight legs | |
| Undertop floor clearance | 400 mm | |
| Mitered top frame edge width | 40 mm | |
| Leg-to-apron flare length | 80 mm | |
| Leg spacing (long side) | 1100 mm | |
| Leg spacing (short side) | 520 mm | |
| Tabletop overhang (long edge) | 25 mm | |
| Tabletop overhang (short edge) | 25 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Distributed top static load capacity | 136 kg | |
|---|---|---|
| Product net weight | 31 kg | |
| Recommended maximum single-point load | 34 kg | |
| Finish surface abrasion resistance | 2000 cycles | |
| Moisture content of solid wood components | 12% | |
| Floor protection foot pad diameter | 25 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop core and frame | Solid kiln-dried hardwood with mitered edge construction | |
|---|---|---|
| Legs and apron | Solid hardwood with integrated flared mortise-and-tenon joinery | |
| Surface finish | UV-cured polyurethane red-brown wood stain and clear topcoat | |
| Joinery hardware | Zinc-plated steel hanger bolts and cross-dowels for leg attachment | |
| Floor protection pads | Felt non-scuff pads affixed to bottom of each leg | |
| Certification decals | Self-adhesive vinyl compliance labels applied to front apron |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Support structure | Fixed four-leg base with continuous perimeter apron, no moving components | |
|---|---|---|
| Assembly requirement | Knock-down assembly requiring leg attachment to pre-installed apron inserts | |
| Surface care | Wipe clean with damp soft cloth, avoid harsh abrasive cleaners | |
| Load distribution guidance | Evenly place heavy items across tabletop to avoid concentrated point loading |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room center placement | Position in front of sofas or seating groups for serving drinks, decor, and media accessories | |
|---|---|---|
| Office reception lounge placement | Use in corporate waiting areas or executive lounge spaces for guest beverage and reading material placement |
EU Market Access Requirements* EN Standards
| EN 15372:2008+A1:2016 | Furniture – Strength, durability and safety for non-domestic tables, for commercial office use cases | |
|---|---|---|
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, for residential living room use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional stability and finish quality | |
|---|---|---|
| GB/T 4893.1-2021 | Surface wear resistance test method for furniture surfaces, applicable for finish durability | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional stability and finish quality; 2. GB/T 4893.1-2021: Surface wear resistance test method for furniture surfaces, applicable for finish durability; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp