| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1600 x 800 x 520 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Lower shelf clearance from floor | 120 mm | |
| Lower shelf height below tabletop | 280 mm | |
| Pedestal leg cross-section | 180 x 180 mm | |
| Tabletop edge overhang | 40 mm | |
| Lower shelf depth | 680 mm | |
| Plinth base height | 60 mm | |
| Integrated port strip length | 120 mm | |
| Under-table knee clearance (side access) | 280 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop static distributed load capacity | 150 kg | |
|---|---|---|
| Product net weight | 55 kg | |
| Gloss finish abrasion resistance | 2000 cycles | |
| Integrated power port rated load | 15 A | |
| Service life under normal commercial use | 10 years | |
| Foot pad floor contact area per leg | 32400 sq mm | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop panel | 18mm E1 grade MDF core with 0.6mm red wood veneer, high-gloss UV cured finish | |
|---|---|---|
| Pedestal legs | Solid rubberwood block construction, matching red wood veneer wrap, moulded edge detailing | |
| Lower storage shelf | 15mm E1 grade engineered wood panel, matching veneer and gloss finish, fixed dado joint connection to legs | |
| Edge trim | Solid wood edge banding, moulded rounded profile, high polish coating to match tabletop | |
| Foot pads | Non-slip PVC non-marking pads affixed to bottom of each plinth base | |
| Embedded utility port | ABS plastic housing with AC power and USB charging ports, flush-mounted to tabletop edge |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Open lower shelf storage | Full-width flat fixed shelf for storage of reception materials, periodicals or serving items | |
|---|---|---|
| Integrated utility access | Flush-mounted port strip at front right top edge for device charging and small appliance power | |
| Fixed stable support | Four wide block pedestal legs with plinth bases for zero wobble on level office flooring | |
| Non-marking floor protection | PVC foot pads at each leg base to prevent scuffs and indentation on hard flooring surfaces |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office reception areas | Formal glossy red wood finish matches traditional executive suite decor for guest seating zones | |
|---|---|---|
| Corporate lounge and waiting spaces | Low profile height supports use alongside lounge sofas for guest beverage and material placement |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for non-domestic seating areas, strength/durability requirements applicable for commercial reception use | |
|---|---|---|
| EN 14749:2016 | Domestic/non-domestic storage units and worktops, applicable to validate shelf load performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural integrity and finish quality checks | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wood furniture, applicable for formaldehyde emission verification | |
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance, applicable to validate high-gloss finish durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural integrity and finish quality checks; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wood furniture, applicable for formaldehyde emission verification; 3. GB/T 4893.8-2013: Furniture surface test for abrasion resistance, applicable to validate high-gloss finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp
