| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2200 x 950 x 1100 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat depth | 650 mm | |
| Backrest total height above seat | 650 mm | |
| Back cushion unit width | 700 mm | |
| Seat base module height | 400 mm | |
| Side table top dimensions | 400 x 300 mm | |
| Side table top height above floor | 720 mm | |
| Side table leg profile | 40 x 20 mm rectangular tube | |
| Base glide diameter | 50 mm | |
| Seat cushion thickness | 150 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Seating capacity | 3 persons | |
|---|---|---|
| Seat static load rating | 1360 N (139 kgf) per seat | |
| Side table static load rating | 150 N (15 kgf) | |
| Unit weight per seat module | 45 kg | |
| Foam density (seat core) | 35 kg/m³ | |
| Foam density (back core) | 28 kg/m³ | |
| Fabric abrasion resistance (suggested spec) | 50000 Martindale cycles | |
| Side table vertical load limit at edge | 100 N (10 kgf) | |
| Total unit static load rating | 4080 N (416 kgf) | |
| Unit weight | 120 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and base upholstery | Grey woven polyester fabric, stretched over foam-padded plywood shell | |
|---|---|---|
| Back cushion upholstery | Burgundy/red woven polyester fabric, sewn with vertical seams per module | |
| Seat core foam | High-resilience polyurethane foam, 150 mm thick, 35 kg/m³ density | |
| Back core foam | Medium-firm polyurethane foam, 200 mm thick, 28 kg/m³ density | |
| Internal seat frame | 18 mm plywood + solid wood blocking, glued and stapled construction | |
| Side table frame | Powder-coated steel rectangular tube, white matte finish | |
| Side table top | 12 mm thick white laminate board with PVC edge banding | |
| Base glides | Black polypropylene glide feet, 50 mm diameter | |
| Sewing thread | Polyester core-spun sewing thread | |
| Module connectors | Plastic snap or bolt-down interlocking connectors (hidden) | |
| Seat base upholstery | Grey woven polyester fabric, stretched over foam-padded plywood shell with tensioned fit | |
| Module interlocking connectors | Hidden plastic snap-fit + bolt-down interlocking hardware, installed at module mating edges |
Adjustment / rotation / tilt / mobility / storage features
| Modular reconfiguration | Units connect via hidden interlocking hardware to form longer or differently curved layouts | |
|---|---|---|
| Variable backrest arrangement | Two low back segments and two high back segments can be positioned at any seat position | |
| Integrated side table | Cantilever white side table provides a stable work or drink surface for the nearest seat | |
| Curved seating geometry | Concave shape supports inward-facing group conversation and informal meetings | |
| Floor protection | Rigid plastic glide feet distribute load and prevent scratching on hard floors | |
| Dual-color zoning | Grey base and red back cushions visually define seating and back support zones | |
| Weight distribution | Wide low-profile base lowers center of gravity for stable tipping resistance | |
| Flexible backrest configuration | Two low-profile back cushions and two high-profile back cushions can be placed at any seat position along the base | |
| Integrated cantilever side table | C-shaped white steel cantilever side table slides alongside the lounge base to provide a stable work or refreshment surface for adjacent seats | |
| Curved inward-facing geometry | Continuous concave seat shape supports inward-facing group conversation and informal small team meetings | |
| Floor protection and stability | Rigid polypropylene glide feet distribute module load evenly and prevent scratching on hard floor surfaces | |
| Dual-color functional zoning | Grey base upholstery and red back cushions visually distinguish seating surfaces from back support zones |
Verified carton / gross weight / assembly / loading data
| Packing units | 3 cartons | |
|---|---|---|
| Seat module carton dimensions | 1300 x 700 x 450 mm | |
| Back cushion carton dimensions | 1500 x 500 x 500 mm | |
| Side table carton dimensions | 800 x 400 x 100 mm | |
| Total gross weight | 120 kg | |
| Total shipment volume | 0.78 CBM | |
| Assembly time | 30 minutes | |
| 20 ft container load quantity | 24 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Office reception and waiting areas | Provides casual waiting seating for 3 persons with a side table for documents or drinks | |
|---|---|---|
| Open-plan office breakout zones | Supports informal team discussions and impromptu 3-person meetings | |
| Co-working lounge areas | Accommodates short-duration work on laptops using the integrated side table | |
| Library and reading rooms | Offers relaxed individual or small-group reading seating with a flat surface for books | |
| Higher education student commons | Withstands high-traffic student use with durable commercial-grade upholstery and foam | |
| Airport and transit lounge VIP areas | Curved form creates semi-enclosed privacy for travelers in open lounge plans | |
| Corporate staff relaxation areas | Provides a comfortable rest space for employees during breaks, with the side table for drinks or personal items | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 1022-2018 | Applicable for seating stability testing of upholstered lounge furniture | |
|---|---|---|
| EN 1728-2012 | Applicable for seat and back strength and durability testing of contract seating | |
| EN 1335-1-2020 | Partially applicable for ergonomic reference dimensions of office seating furniture | |
| EN 1375-1:2022 | Partially applicable for fire resistance reference of upholstered furniture for public spaces |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Applicable for general lounge and public seating strength and durability testing | |
|---|---|---|
| ANSI/BIFMA X7.1-2021 | Applicable for formaldehyde and VOC emissions evaluation of composite wood components |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for wood-based internal frame strength and durability inspection of upholstered furniture | |
|---|---|---|
| GB/T 16799-2008 | Applicable for foam performance requirements used in furniture upholstery | |
| GB 20286-2006 | Applicable for flame-retardant performance of upholstered fabrics in public places if required by project | |
| GB/T 28202-2011 | Applicable for classification and terminology of upholstered furniture for procurement documentation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for wood-based internal frame strength and durability inspection of upholstered furniture; 2. GB/T 16799-2008: Applicable for foam performance requirements used in furniture upholstery; 3. GB 20286-2006: Applicable for flame-retardant performance of upholstered fabrics in public places if required by project; 4. GB/T 28202-2011: Applicable for classification and terminology of upholstered furniture for procurement documentation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
