Product supplierContemporary Asymmetrical Curved Upholstered Chaise Lounge, Caramel rust velvet with matching contrast edge stitching
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1651 × 889 × 838 mm | |
|---|---|---|
| Seat height from floor | 419 mm | |
| Seat depth at deepest point | 610 mm | |
| Tall end backrest height | 838 mm | |
| Low end backrest height | 686 mm | |
| Leg height | 152 mm | |
| Seat cushion thickness | 127 mm | |
| Backrest thickness at padded edge | 76 mm | |
| Leg base spread | 1575 x 813 mm | |
| Arm wrap height at ends | 635 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static weight capacity | 150 kg | |
|---|---|---|
| Product net weight | 35 kg | |
| Foam density (seat cushion) | 35 kg/m³ | |
| Foam rebound rate | 60% | |
| Fabric abrasion resistance (Martindale) | 30000 rubs | |
| Seam stitch pitch | 8 stitches per 30 mm | |
| Leg static load per leg | 75 kg | |
| Standard warranty period | 6 months | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Upholstery fabric | Caramel rust velvet with matching contrast edge stitching | |
|---|---|---|
| Seat cushion fill | High-density polyurethane foam wrapped in polyester fiber | |
| Internal frame | Mixed solid hardwood and engineered plywood, 25mm thick core | |
| Leg construction | 12mm diameter polished gold plated tapered steel stiletto legs | |
| Backrest fill | 28 kg/m³ density polyurethane foam with Dacron wrap | |
| Fastening hardware | Zinc-plated steel screws and insert nuts for leg attachment | |
| Edge trim | Self-fabric piped edging along curved frame seams | |
| Foot pads | Non-marking polyethylene floor protection caps on each leg end | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | Single-person reclined fixed-position lounge seating | |
|---|---|---|
| Assembly requirement | Attach four legs to pre-installed frame inserts with included hardware | |
| Back support profile | Continuous curved wrapped support sloping from tall end to low end | |
| Integrated armrests | Fully enclosed wrapped armrests integrated into both frame ends | |
| Floor protection | Non-slip non-marking foot pads prevent hard floor scratching | |
| Recline angle (seat to back) | 110 degrees | |
| Color option availability | Multiple velvet upholstery color options per category standard | |
| Cleaning method | Spot clean with water-free upholstery solvent | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room lounge placement | Position against feature wall as standalone accent seating for modern glam interiors | |
|---|---|---|
| Bedroom relaxation seating | Place at foot of bed or in dressing nook for relaxed personal seating | |
| Boutique reception area use | Install in upscale boutique waiting areas for decorative guest seating | |
| Home lounge nook setup | Pair with small side table in reading corners for casual reclined use | |
| Residential open plan spaces | Use as sculptural accent piece in open concept living zones | |
| Styled photoshoot setting | Suitable for home staging and interior design styled photography sets |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Domestic furniture seating strength and durability testing standard | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability resistance to smouldering cigarette |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to frame structure inspection | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, for indoor air quality compliance | |
| GB/T 19833-2023 | Furniture mechanical strength test method, applicable for static load verification |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to frame structure inspection; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, for indoor air quality compliance; 3. GB/T 19833-2023: Furniture mechanical strength test method, applicable for static load verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool