Product supplierY-Shaped Modular Upholstered Bench, High-density polyurethane foam, medium-firm grade
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1800 × 1800 × 450 mm | |
|---|---|---|
| Overall footprint | 1800 x 1800 x 450 mm | |
| Single arm length | 1200 mm | |
| Seat width per arm | 380 mm | |
| Seat cushion thickness | 120 mm | |
| Base plinth height | 60 mm | |
| Center junction width | 520 mm | |
| Seat height from floor | 450 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Seating capacity | 3 adults | |
|---|---|---|
| Distributed static load rating | 360 kg | |
| Unit weight | 42 kg | |
| Foam indentation load deflection (ILD) | 35 lb/50mm | |
| Fabric abrasion resistance reference | 50000 double rubs | |
| Fabric abrasion resistance rating | 50000 double rubs | |
| Foam compression set rating | 10% | |
| Seam tensile strength | 200 N/50mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat cushion fill | High-density polyurethane foam, medium-firm grade | |
|---|---|---|
| Top upholstery layer | Woven fabric in navy blue, stitched to side panels | |
| Side upholstery layer | Woven fabric in lime green, wrapped around vertical and angled side faces | |
| Internal support frame | Engineered wood-based panel frame with solid wood reinforcement blocks | |
| Bottom base panel | Black rigid base board with non-slip floor pads | |
| Internal reinforcement at junction | Plywood gusset plates connecting three arm frames | |
| Stitching construction | Lockstitch seams at top-to-side fabric junction | |
| Internal junction reinforcement | 12mm thick plywood gusset plates connecting three arm frames | |
| Edge trim | Foam-backed upholstery wrapped over rounded arm ends with no visible hard trim | |
| Floor contact pads | Non-slip thermoplastic rubber pads spaced evenly along base perimeter | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Modular combinability | Three-arm Y-shaped unit that can be grouped with additional straight or angled modules to form larger seating layouts | |
|---|---|---|
| Fixed non-adjustable seat height | Seat height remains fixed at 450mm, no lift or recline mechanism | |
| Floor-protecting contact pads | Base fitted with non-slip plastic pads to prevent scratching and reduce sliding | |
| Dual-side usable seating | All three outer edges serve as seating front edges, supporting spontaneous multi-directional use | |
| Light reconfigurability | Unit can be manually repositioned by two people without tools due to freestanding design | |
| Junction load sharing | Center junction distributes load across all three arms for uniform structural performance | |
| Multi-directional seating access | All three outer edges serve as seating front edges, supporting spontaneous 3-directional use by concurrent small groups | |
| Light manual reconfigurability | Unit can be manually repositioned by two people without tools due to 42kg freestanding design | |
| Junction load distribution | Center junction distributes point loads across all three arms to eliminate localized frame stress | |
| Dual-tone visual zoning | Contrasting navy seat and lime side upholstery defines seating surfaces and base visually for intuitive public use | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Packaging units per set | 1 carton | |
|---|---|---|
| Reference carton dimensions | 1900 x 1900 x 550 mm | |
| Reference gross weight | 48 kg | |
| Reference package volume | 1.99 cbm | |
| Assembly time on site | 10 minutes | |
| 20ft container loading quantity | 16 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception and waiting areas | Suitable for corporate lobbies and visitor waiting zones, providing multi-directional casual seating for short stays | |
|---|---|---|
| Co-working breakout spaces | Suitable for informal discussion and rest areas in flexible offices, where Y-shape encourages small group interaction | |
| Educational building lobbies | Suitable for university and training center common areas with medium-to-high foot traffic | |
| Exhibition hall and museum rest zones | Suitable for public cultural venues requiring flexible, visually distinctive seating with modular expandability | |
| Airport and rail station VIP lounges | Suitable for premium waiting areas seeking contemporary aesthetic and scattered seating arrangement | |
| Retail store customer rest areas | Suitable for fashion and lifestyle retail floors, providing compact multi-seat rest spots that match modern interior design | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1021-1 | Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source: smouldering cigarette | |
|---|---|---|
| EN 1021-2 | Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source: match flame equivalent | |
| EN 15373 | Furniture - Strength, durability and safety of non-domestic seating - Requirements, applicable to contract/office lounge seating |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.4 | General-purpose public seating tests, applicable to commercial lounge and lobby bench seating | |
|---|---|---|
| ANSI/BIFMA M7.1 | Standard test method for determining VOC emissions from office furniture systems, applicable to commercial interior installation |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324 | General technical requirements for wood furniture, applicable to internal wood-based frame components | |
|---|---|---|
| GB/T 27631 | Upholstered furniture - Foam - Test method for compression set, applicable to polyurethane cushion foam | |
| GB 20286 | Fire retardant properties and labels for public place products, applicable if installed in public assembly areas | |
| GB/T 16799 | Furniture leather - Test method for rubbing fastness, referenced if leather upholstery variant is selected |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324: General technical requirements for wood furniture, applicable to internal wood-based frame components; 2. GB/T 27631: Upholstered furniture - Foam - Test method for compression set, applicable to polyurethane cushion foam; 3. GB 20286: Fire retardant properties and labels for public place products, applicable if installed in public assembly areas; 4. GB/T 16799: Furniture leather - Test method for rubbing fastness, referenced if leather upholstery variant is selected; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool