Name: Two-Tone Modular Armless Daybed Sofa with Cylindrical Stem-Mounted Backrests
Brand: WEIKE
SKU: JKMPD0

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2200 × 970 × 720 mm
Seat height	450 mm
Seat depth	640 mm
Individual seat module width	900 mm
Backrest bolster diameter	150 mm
Backrest stem height above seat	270 mm
Backrest stem diameter	12 mm
Base bevel angle from vertical	15 degrees
Base ground clearance	5 mm
Backrest total width per seat	600 mm
Seat foam thickness	120 mm
Seat Cushion Thickness	180 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Overall static load capacity	362 kg
Product net weight	70 kg
Seat foam density	28 kg/m³
Seat foam rebound rate	60%
Fabric abrasion resistance (Martindale)	30000 cycles
Fabric weight	300 gsm
Seam stitch pitch	30 mm/10 stitches
Cushion shape recovery time	72 hours
Warranty period	3 years
Seat Foam Density / Rebound	40 kg/m³ / 60%

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat base outer upholstery	Polyester woven fabric, matte finish, off-white and dark green two-tone
Internal support frame	Kiln-dried engineered hardwood, corner-blocked joinery
Seat core fill	28D high-resilience polyurethane foam, no coil springs
Backrest bolster fill	High-density polyurethane foam, cylindrical shape
Backrest support stems	Powder-coated steel tubular posts, matte silver finish
Base bottom glides	Non-marking felt pads, floor-protective
Seat support layer	10mm thick hardboard panel, fully upholstered
Modular connecting hardware	Zinc-plated steel connector brackets, invisible external finish
Backrest mounting sockets	Reinforced plastic inserts, integrated into seat base
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide
Leg Connector Specification	Reference M8-M10 with at least 1 mechanical fixing per leg

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Modular seat configuration	Two independent seat sections connect via hidden steel brackets to form a straight platform
Backrest position adjustment	Stem-mounted bolsters insert into seat sockets, allowing 100mm vertical height adjustment and 360-degree rotation
Backrest removal option	Cylindrical backrests can be fully removed to convert the unit to an open bench/platform
Floor protection function	Felt bottom glides prevent floor scratching on hard surface flooring without adjustable feet
Two-color design option	Two-tone off-white and dark green upholstery provides reversible color-block visual customization
Modular expansion compatibility	Units can be connected end-to-end to create longer linear lounge seating arrangements
Seating surface use	Low deep seat supports upright seated or relaxed reclined lounge postures for two adults
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room lounge	Low-profile design works as casual two-seat seating for open-plan modern living spaces
Office reception/waiting area	Compact two-seat form provides guest seating in minimalist corporate reception zones
Boutique hotel lobby lounge	Two-tone contemporary style complements high-end hospitality public space design
Open-plan workspace breakout area	Provides relaxed informal seating for employee breaks or small collaborative discussions
Residential bedroom end-of-bed bench	Low profile works as a foot-of-bed seating option with removable backrests
Showroom display seating	Faceted angular silhouette serves as a decorative statement piece for furniture or interior showrooms

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1728:2012	Furniture - Seating - Test methods for strength and durability, applicable to structural load validation
EN 1021-1:2014	Furniture - Assessment of flammability of upholstered furniture, ignition source smouldering cigarette, applicable to fire safety checks

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to internal wood frame quality checks
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture, applicable to formaldehyde emission checks
GB/T 19826-2017	Technical specifications for upholstered furniture sofas, applicable to structural performance and durability checks

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal wood frame quality checks;
2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable to formaldehyde emission checks;
3. GB/T 19826-2017: Technical specifications for upholstered furniture sofas, applicable to structural performance and durability checks;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · MAD-2T-2200

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · MAD-2T-2200

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · MAD-2T-2200Open Export Tool

Quick Actions

Post an RFQ

Product Description

WEIKE MAD-2T-2200 is a two-tone modular armless daybed sofa defined by contemporary, minimalist, low-profile design. Its streamlined, legless base features a subtle 15-degree bevel from vertical, wrapped in matte polyester woven fabric with a curated off-white and dark green two-tone finish. The straight two-seat platform is paired with cylindrical backrest bolsters mounted on slender matte silver powder-coated steel stems, creating a clean, uncluttered silhouette that reads as lightweight yet intentional in any space. The two-tone upholstery supports reversible color-block customization, allowing users to adjust visual presentation to match surrounding decor. Constructed for long-term regular use, the daybed’s internal support frame uses kiln-dried engineered hardwood with corner-blocked joinery, capped with a 10mm thick fully upholstered hardboard panel to form a stable seating base. The seat core is filled with 28D high-resilience polyurethane foam without coil springs, balancing supportive cushioning with 60% rebound rate for comfortable use across upright and reclined postures. The cylindrical backrest bolsters are filled with high-density polyurethane foam, mounted to stems that slot into reinforced plastic inserts integrated into the seat base. Invisible zinc-plated steel brackets connect the two independent seat modules, eliminating visible hardware on exterior surfaces, while non-marking felt pads line the base bottom to protect hard flooring from scratches without requiring adjustable feet. The upholstered polyester fabric carries a 300gsm weight, engineered for repeated use, with seams stitched for consistent durability. Functional flexibility is a core feature of this design. The stem-mounted backrest bolsters support 100mm vertical height adjustment and full 360-degree rotation, and can be removed entirely to convert the unit to an open bench or flat platform. Individual units connect end-to-end to create extended linear lounge seating, while the low, deep seat accommodates both upright seated positions and relaxed reclining for two adults. The daybed suits a broad range of residential and commercial settings. It works as casual two-seat lounge seating for open-plan modern residential living rooms, or as a sleek foot-of-bed bench in residential bedrooms when backrests are removed. In commercial spaces, it fits neatly as guest seating in minimalist office reception and waiting areas, as relaxed informal seating for open-plan workspace breakout zones for employee breaks or small collaborative discussions, as curated lounge seating for boutique hotel lobbies, and as a decorative statement display piece for furniture and interior showrooms. For procurement planning, note that each set ships in two cartons, with an 40 minutes of assembly time per unit. The modular design supports scalable seating configurations for larger spaces, while the removable and adjustable backrests allow adaptability for different use cases across both temporary and permanent installations.

Two-Tone Modular Armless Daybed Sofa with Cylindrical Stem-Mounted Backrests Specifications

Suppliers and stock