Two-Tone Yellow Dark Gray Trapezoid Modular U-Shape Floor Lounge Sofa Set with Center Side Table (model MDL-TRP-YG-01) is listed under Fabric Office Sofa. Dimensions: 3200 × 2800 × 780 mm. Materials: Woven commercial-grade polyester fabric, matte finish, two-tone yellow and dark gray. Load capacity: 1200 kg. Product Features: modern,geometric,design,modular,reconfigurable,structure,two-tone,upholstery,floor-sitting,block,base. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JUESHANGDA | Model | MDL-TRP-YG-01 |
| Overall dimensions (W × D × H) | 3200 × 2800 × 780 mm | Overall assembled configuration dimensions | 3200 x 2800 x 780 mm |
| Seat height from finished floor | 450 mm | Seat depth per individual module | 700 mm |
| Backrest height for end backrest modules | 330 mm above seat surface | Single trapezoid armless seating module width (long edge) | 1320 mm |
| Center side table diameter | 600 mm | Center side table height | 410 mm |
| Upholstered edge radius on all modules | 50 mm | Seat cushion thickness | 150 mm |
| Internal legless base height (floor to seat frame bottom) | 0 mm | Back Cushion Thickness | 160 mm |
| Leg Height / Floor Clearance | 160 mm | Total static load capacity for full seating set | 1200 kg |
| Foam density (seat core) | 45 kg/m³ | Foam density (backrest core) | 35 kg/m³ |
| Fabric abrasion resistance (Martindale) | 50000 cycles | Foam rebound rate | 60% |
| Total product net weight (full set) | 280 kg | Seating capacity | 6 users |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
| Per-seat Load Reference | 130 kg/seat | External upholstery | Woven commercial-grade polyester fabric, matte finish, two-tone yellow and dark gray |
| Seat cushion fill | High-density polyurethane foam wrapped with 20mm Dacron batting | Backrest fill | Medium-density polyurethane foam wrapped with Dacron batting |
| Internal frame | Kiln-dried solid hardwood with reinforced metal corner brackets | Module base | Solid wood frame wrapped with matching upholstery, direct floor contact with non-slip fabric base pad |
| Modular connection hardware | Powder-coated steel interlocking alignment clips | Center table top | Slatted natural solid wood veneer over MDF core, natural brown finish |
| Center table frame | Matte black powder-coated thin-gauge steel wireframe base | Upholstery stitching | Nylon-bonded thread, 8mm seam pitch, matched color thread per upholstery section |
| Floor protection layer | 3mm thick non-woven fabric anti-scratch pad affixed to all module bases | Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | Modular reconfiguration | Interlocking trapezoid modules form U-shape, straight, L-shape or custom polygonal layouts via bottom connection clips |
| Tool-free assembly | Modules connect via pre-installed alignment clips, no specialized fasteners required for standard configurations | Low-profile floor seating | Zero-elevation block design provides casual lounge seating without under-seat leg clearance gaps |
| Dual-color zone configuration | Yellow accent modules mark primary seated end positions, dark gray modules fill armless bench/ottoman seating | Central table integration | Included round side table fits perfectly in the central open space for beverage, reading material or decor placement |
| Fixed position stability | Non-slip base pads prevent unintended sliding of modules on hard or soft flooring surfaces | No recline or moving mechanisms | Static fixed-angle seat and backrest design for durability in high-traffic public spaces |
| Commercial cleanability | Tight woven fabric surface supports spot cleaning with standard upholstery cleaners for public space maintenance | Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | Reference Packaging Volume | 1.8 m³/item |
| Reference Packaged Gross Weight | 110 kg/item | Office reception waiting areas | Grouped U-shape creates welcoming enclosed seating for visitors waiting for appointments |
| Open office collaboration zones | Low-profile modular layout supports impromptu small team discussions or casual work sessions | Public lobbies (hotel, education, healthcare) | Durable commercial-grade construction supports high daily visitor traffic in public spaces |
| Breakroom and lounge spaces | Relaxed low seat height provides informal seating for staff breaks or casual socializing | Exhibition and event temporary seating | Reconfigurable modules can be rearranged for different event layout requirements quickly |
| Retail customer rest areas | Two-tone modern aesthetic complements contemporary retail interior design schemes | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 3200 × 2800 × 780 mm | |
|---|---|---|
| Overall assembled configuration dimensions | 3200 x 2800 x 780 mm | |
| Seat height from finished floor | 450 mm | |
| Seat depth per individual module | 700 mm | |
| Backrest height for end backrest modules | 330 mm above seat surface | |
| Single trapezoid armless seating module width (long edge) | 1320 mm | |
| Center side table diameter | 600 mm | |
| Center side table height | 410 mm | |
| Upholstered edge radius on all modules | 50 mm | |
| Seat cushion thickness | 150 mm | |
| Internal legless base height (floor to seat frame bottom) | 0 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total static load capacity for full seating set | 1200 kg | |
|---|---|---|
| Foam density (seat core) | 45 kg/m³ | |
| Foam density (backrest core) | 35 kg/m³ | |
| Fabric abrasion resistance (Martindale) | 50000 cycles | |
| Foam rebound rate | 60% | |
| Total product net weight (full set) | 280 kg | |
| Seating capacity | 6 users | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| External upholstery | Woven commercial-grade polyester fabric, matte finish, two-tone yellow and dark gray | |
|---|---|---|
| Seat cushion fill | High-density polyurethane foam wrapped with 20mm Dacron batting | |
| Backrest fill | Medium-density polyurethane foam wrapped with Dacron batting | |
| Internal frame | Kiln-dried solid hardwood with reinforced metal corner brackets | |
| Module base | Solid wood frame wrapped with matching upholstery, direct floor contact with non-slip fabric base pad | |
| Modular connection hardware | Powder-coated steel interlocking alignment clips | |
| Center table top | Slatted natural solid wood veneer over MDF core, natural brown finish | |
| Center table frame | Matte black powder-coated thin-gauge steel wireframe base | |
| Upholstery stitching | Nylon-bonded thread, 8mm seam pitch, matched color thread per upholstery section | |
| Floor protection layer | 3mm thick non-woven fabric anti-scratch pad affixed to all module bases | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Modular reconfiguration | Interlocking trapezoid modules form U-shape, straight, L-shape or custom polygonal layouts via bottom connection clips | |
|---|---|---|
| Tool-free assembly | Modules connect via pre-installed alignment clips, no specialized fasteners required for standard configurations | |
| Low-profile floor seating | Zero-elevation block design provides casual lounge seating without under-seat leg clearance gaps | |
| Dual-color zone configuration | Yellow accent modules mark primary seated end positions, dark gray modules fill armless bench/ottoman seating | |
| Central table integration | Included round side table fits perfectly in the central open space for beverage, reading material or decor placement | |
| Fixed position stability | Non-slip base pads prevent unintended sliding of modules on hard or soft flooring surfaces | |
| No recline or moving mechanisms | Static fixed-angle seat and backrest design for durability in high-traffic public spaces | |
| Commercial cleanability | Tight woven fabric surface supports spot cleaning with standard upholstery cleaners for public space maintenance | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception waiting areas | Grouped U-shape creates welcoming enclosed seating for visitors waiting for appointments | |
|---|---|---|
| Open office collaboration zones | Low-profile modular layout supports impromptu small team discussions or casual work sessions | |
| Public lobbies (hotel, education, healthcare) | Durable commercial-grade construction supports high daily visitor traffic in public spaces | |
| Breakroom and lounge spaces | Relaxed low seat height provides informal seating for staff breaks or casual socializing | |
| Exhibition and event temporary seating | Reconfigurable modules can be rearranged for different event layout requirements quickly | |
| Retail customer rest areas | Two-tone modern aesthetic complements contemporary retail interior design schemes |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic furniture - Seating - Determination of stability, applicable to overall seating tip resistance | |
|---|---|---|
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applicable to commercial public area use | |
| EN 14465:2022 | Upholstery fabrics - Specification for woven fabrics for furniture, applicable to fabric performance requirements |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Standard for lounge seating, applicable to commercial seating structural durability and load testing | |
|---|---|---|
| ANSI/BIFMA e3-2022 | Furniture sustainability standard, applicable to low-emission material selection for commercial spaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal wood frame structural stability | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to formaldehyde emission limits for internal frame materials | |
| GB/T 1952.1-2012 | General technical requirements for sofas, applicable to soft seating structural durability and safety |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal wood frame structural stability; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission limits for internal frame materials; 3. GB/T 1952.1-2012: General technical requirements for sofas, applicable to soft seating structural durability and safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp