Product supplierModular L-Shaped Lounge Reception Set with Side Tables and Ottomans, 18mm thick engineered plywood frame
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 3600 × 2800 × 720 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total seating capacity | 10 persons | |
|---|---|---|
| Single seat static load capacity | 150 kg | |
| Total set net weight | 240 kg | |
| Upholstery abrasion resistance | 30000 double rubs | |
| Recommended warranty period | 3 years | |
| Total standard seating capacity | 10 persons | |
| Cushion compression set resistance | 90% rebound after 25000 compression cycles | |
| Floor glide scratch resistance rating | Zero visible scuff on polished tile after 1000 slide cycles | |
| Recommended commercial warranty period | 3 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat frame construction | 18mm thick engineered plywood frame | |
|---|---|---|
| Seat core padding | 40kg/m³ high-resilience polyurethane foam, 80mm thickness | |
| Backrest padding | 30kg/m³ polyurethane foam, 100mm thickness | |
| Seat and back upholstery | Woven polyester fabric, light gray base with dusty blue back cushions | |
| Decorative throw pillows | 200gsm woven polyester cover with 25kg/m³ foam fill | |
| Side table tops | 12mm thick solid composite stone surface, matte white finish | |
| Side table bases | 2mm thick powder-coated steel, tapered column design, dusty blue finish | |
| Ottoman construction | Plywood inner frame, 35kg/m³ foam padding, woven polyester upholstery | |
| Seat base trim | Black PVC edge binding along all module base perimeters | |
| Seat internal frame | 18 mm thick birch engineered plywood, glued and stapled joinery | |
| Side table support bases | 2 mm thick cold-rolled steel, powder-coated dusty blue matte finish, tapered column design | |
| Seat base edge trim | 1 mm thick black PVC edge binding, secured with industrial adhesive |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Modular configuration flexibility | All seating units connect via hidden under-seat fasteners, support custom layout rearrangement | |
|---|---|---|
| Supplementary seating function | Two cylindrical ottomans provide extra guest seating or footrest support for primary seats | |
| Integrated surface placement | Two round side tables fit in open gaps between L-shaped seating banks for shared drink and item access | |
| Backrest support design | Fixed low backrests align with outer edges of L-shaped layouts, leaving inner corner seating open for flexible use | |
| Non-slip base function | All seating units, tables, and ottomans include non-marking rubber floor glides to prevent sliding and floor damage | |
| Upholstery maintenance feature | Stain-repellent fabric treatment allows spot cleaning with mild detergent without discoloration | |
| Modular layout reconfiguration | All units connect via hidden under-seat steel clips, support 90-degree corner, straight or U-shaped layout rearrangement with no tools | |
| Auxiliary multi-use seating | Two cylindrical ottomans function as either footrests for adjacent seats or temporary guest seating for overflow visitors | |
| Fixed perimeter back support | Low backrests are fixed along outer edges of L-shaped clusters, leaving inner corner seats open to accommodate flexible group conversation orientations | |
| Floor protection stability | All seating, table and ottoman units are fitted with recessed TPR rubber glides to prevent lateral sliding and eliminate scuff damage to hard tile, wood or vinyl flooring | |
| Stain-resistant upholstery maintenance | Polyester fabric is treated with a fluoropolymer stain repellent, allowing spot cleaning of common beverage or food stains with pH-neutral detergent without discoloration | |
| Modular connection stability | Under-seat locking clips prevent accidental separation of joined seating units during normal use, while allowing intentional disconnection for layout changes in under 10 minutes per reconfiguration |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Corporate office reception lobbies | arranged in paired L-clusters to accommodate 10waiting visitors with convenient table access for drinks and materials | |
|---|---|---|
| Co-working space open lounge zones | reconfigured into straight or U-shaped layouts to support casual meetings, solo work breaks or small group discussions | |
| Hotel waiting and lounge areas | placed near check-in zones or elevator lobbies to provide comfortable guest seating with color-matched modern aesthetic | |
| Medical clinic waiting areas | stain-resistant fabric and modular design support easy cleaning and flexible layout adjustment for variable patient volumes | |
| Education institution common areas | installed in student lounges or administrative waiting zones to provide durable, reconfigurable seating for daily high-traffic use | |
| Retail customer rest zones | positioned near store entrances or fitting room areas to provide comfortable seating for waiting shoppers with durable, easy-to-clean surfaces | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool