Product supplierS-Curve Modular Upholstered Lobby Bench with Integrated Planters, Light gray commercial linen-look polyester fabric
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 3350 × 680 × 450 mm | |
|---|---|---|
| Overall modular footprint | 3350 x 1700 x 760 mm | |
| Seat height | 450 mm | |
| Seat depth per segment | 680 mm | |
| Individual curved seat module length | 680 mm | |
| Backrest height above seat | 310 mm | |
| Integrated planter cavity internal diameter | 300 mm | |
| Planter cavity depth | 250 mm | |
| Module joint gap | 2 mm | |
| Base floor clearance | 10 mm | |
| Matching round side table height | 500 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static load per seat position | 150 kg | |
|---|---|---|
| Total seating capacity | 8 persons | |
| Upholstery abrasion resistance | 50000 cycles | |
| Cushion foam density | 45 kg/m³ | |
| Foam resilience rate | 60% | |
| Frame static load rating | 1200 kg | |
| Product warranty | 3 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Light gray commercial linen-look polyester fabric | |
|---|---|---|
| Backrest upholstery | Medium blue coordinating commercial fabric | |
| Cushion fill | High-resilience cold-cure PU foam | |
| Internal frame | 1.5mm thick powder-coated steel tube | |
| Planter cavity liner | Waterproof HDPE plastic liner | |
| Base structure | Molded plywood inner support with non-slip felt feet | |
| Fabric surface treatment | Stain-repellent nano-coating | |
| Module connecting hardware | Zinc-plated steel interlocking brackets | |
| Seam stitching | High-tenacity polyester thread with 8mm stitch pitch | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Modular configuration | Interlocking curved segments assemble into freeform S-shape | |
|---|---|---|
| Integrated biophilic planters | Recessed waterproof cavities at curve peaks hold live potted plants | |
| Bidirectional seating | Armless low-profile design allows seating on both sides of the S-curve | |
| Fixed floor stability | Non-marking adjustable feet provide level placement on uneven polished floors | |
| Maintenance access | Removable planter liners allow drainage and plant replacement without upholstery disassembly | |
| Segment replacement | Individual damaged modules can be disconnected and replaced without full disassembly | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office lobby waiting areas | Provides durable biophilic seating for employee and visitor entry spaces | |
|---|---|---|
| Hotel reception zones | Creates a contemporary curved focal point for guest check-in waiting | |
| Public exhibition halls | Supports high foot traffic with modular flexible seating configurations | |
| Hospital outpatient waiting areas | Stain-resistant upholstery supports easy cleaning for high-use public health spaces | |
| Airport terminal lounge zones | High-capacity bidirectional seating maximizes usable space in open concourses | |
| Tech company collaboration hubs | Casual curved layout supports informal group discussion and short breaks |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Strength, durability and safety requirements for non-domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability resistance to smouldering cigarette |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Performance standard for lounge and public seating, load and durability testing | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Furniture sustainability standard for material emissions and environmental impact |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural base components | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limit for wood-based panels, E1 grade required for indoor public use | |
| GB/T 19889.3-2005 | Acoustic performance rating for indoor public space furniture |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural base components; 2. GB 18580-2017: Formaldehyde emission limit for wood-based panels, E1 grade required for indoor public use; 3. GB/T 19889.3-2005: Acoustic performance rating for indoor public space furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool