| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1500 x 450 x 450 mm | |
|---|---|---|
| Seat cushion thickness | 80 mm | |
| Leg outer diameter | 32 mm | |
| Leg wall thickness | 1.2 mm | |
| Perimeter frame tube width | 25 mm | |
| Seat surface height from floor | 450 mm | |
| Tuft button grid spacing | 150 mm | |
| Under-seat floor clearance | 370 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Product net weight | 18 kg | |
|---|---|---|
| Total static load capacity | 360 kg | |
| Seat foam density | 35 kg/m³ | |
| Fabric abrasion resistance (Martindale) | 30000 cycles | |
| Recommended maximum occupancy | 3 persons | |
| Frame surface scratch resistance | 2H pencil hardness | |
| Seat usable width per occupant | 500 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat outer upholstery | Woven polyester fabric | |
|---|---|---|
| Seat core padding | High-density polyurethane foam | |
| Seat tuft detailing | Fabric-covered button tufting | |
| Perimeter support frame | Chrome-plated cold-rolled steel tube | |
| Support legs | Cylindrical chrome-plated cold-rolled steel tube | |
| Foot glides | Injection-molded non-slip nylon | |
| Internal seat substrate | 12mm thick plywood panel | |
| Frame finish coating | Multi-layer polished chrome plating | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Backless armless long bench | |
|---|---|---|
| Floor protection function | Integrated non-marking nylon glides at each leg base | |
| Under-seat access | 370mm open clearance below seat | |
| Placement flexibility | Symmetrical 4-leg design | |
| Surface maintenance | Tight woven fabric upholstery | |
| Structural stability | Welded perimeter steel frame connecting all four legs | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Packaged carton count | 1 unit | |
|---|---|---|
| Single carton outer dimensions | 1550 x 500 x 500 mm | |
| Packaged gross weight | 21 kg | |
| Shipment volume per unit (CBM) | 0.388 cbm | |
| On-site assembly time | 10 minutes | |
| 20ft GP container loading quantity | 84 units | |
| 40ft HQ container loading quantity | 210 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set |
Recommended spaces / users / usage modes
| Office reception and waiting areas | Suitable for corporate lobbies, meeting room anterooms and visitor waiting zones, provides compact, durable seating for 3 guests without bulky backrests that block sight lines | |
|---|---|---|
| Public facility waiting spaces | Suitable for hospital outpatient areas, bank service lobbies and government service centers, meets high-traffic durability and easy-clean requirements | |
| Residential bedroom and entryway use | Suitable for placement at the foot of king or queen size beds, or in residential entryways for temporary seating while putting on shoes, neutral tufted design complements modern, mid-century and minimalist interior styles | |
| Breakout and collaborative spaces | Suitable for office breakout areas, co-working space lounge zones and café supplementary seating, lightweight frame allows easy repositioning for flexible event layouts | |
| Temporary event seating | Suitable for conference events, exhibition booths and pop-up retail spaces, durable steel frame withstands frequent setup and teardown, neutral beige color coordinates with standard event decor |
EU Market Access Requirements* EN Standards
| EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | Applicable for commercial non-domestic use, specifies static load, fatigue impact and stability test requirements for public waiting benches | |
|---|---|---|
| EN 1022:2018 Furniture - Seating - Determination of stability | Applicable to verify no forward, side or rear tipping risk under normal and foreseeable use conditions |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 Lounge and Public Seating | Applicable for commercial installation in North American markets, specifies static load, durability and stability test methods for public waiting seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable to hidden internal plywood seat substrate, specifies dimensional tolerance, edge finishing and structural strength requirements for acceptance | |
|---|---|---|
| GB/T 3325-2017 Metal furniture general technical conditions | Applicable to chrome-plated steel frame and legs, specifies metal tube wall thickness, welding strength, coating adhesion and corrosion resistance requirements | |
| GB 20400-2006 Leather and fur - Limit of harmful matter | Applicable if leather upholstery option is selected, specifies formaldehyde and harmful dye limits for upholstery materials | |
| GB/T 17592-2011 Textiles - Determination of banned azo colourants | Applicable to fabric upholstery, specifies limit values for carcinogenic azo dyes in direct skin contact textiles |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable to hidden internal plywood seat substrate, specifies dimensional tolerance, edge finishing and structural strength requirements for acceptance; 2. GB/T 3325-2017 Metal furniture general technical conditions: Applicable to chrome-plated steel frame and legs, specifies metal tube wall thickness, welding strength, coating adhesion and corrosion resistance requirements; 3. GB 20400-2006 Leather and fur - Limit of harmful matter: Applicable if leather upholstery option is selected, specifies formaldehyde and harmful dye limits for upholstery materials; 4. GB/T 17592-2011 Textiles - Determination of banned azo colourants: Applicable to fabric upholstery, specifies limit values for carcinogenic azo dyes in direct skin contact textiles; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
