Multicolor Fabric Upholstered Open C-Shaped Modular Lounge Seating Set (model MOD-LOUNGE-CURV-C6-ARM2) is listed under Fabric Office Sofa, with overall dimensions of 2500 × 2030 × 890 mm and main material of Fabric. Load capacity: 150 kg. Certifications: multicolor,upholstery,modular,interlocking,design,low,blocky,plinth,base,integrated,end,armrests,open,semicircular,layout. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall cluster dimensions | 2500 x 2030 x 890 mm | |
|---|---|---|
| Seat height | 430 mm | |
| Individual armless wedge seat width | 620 mm | |
| Seat depth | 610 mm | |
| Armrest height above seat | 460 mm | |
| Backrest height above seat | 460 mm | |
| Plinth base height | 100 mm | |
| Armrest segment width | 620 mm | |
| Central open inner radius | 800 mm | |
| Per-seat usable surface width | 580 mm | |
| Cushion thickness | 120 mm | |
| Armrest pad thickness | 80 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per-seat static load capacity | 150 kg | |
|---|---|---|
| Total cluster seating capacity | 6 persons | |
| Seat foam density | 40 kg/m³ | |
| Foam rebound rate | 45% | |
| Upholstery fabric abrasion resistance | 100000 cycles | |
| Total net weight (fully assembled) | 180 kg | |
| Inter-module connection shear strength | 200 kg | |
| Standard commercial warranty | 2 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Internal load-bearing frame | 18mm thick plywood with moisture-resistant seal | |
|---|---|---|
| Seat and back fill | High-density polyurethane foam over supportive sinuous spring base | |
| Upholstery fabric | 320g/m² woven polyester fabric with stain-resistant finish | |
| Plinth base structure | Upholstered hardwood frame with non-slip floor glides | |
| Inter-module connectors | Powder-coated steel ganging brackets with locking tabs | |
| Seam construction | Stitched seams with 8 stitches per inch for heavy-use durability |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Modular reconfiguration | Interlocking steel brackets allow rearrangement into linear, curved or clustered layouts | |
|---|---|---|
| Non-marking floor protection | Integrated nylon glides on base bottom prevent floor scuffing during repositioning | |
| Removable upholstery covers | Zippered fabric covers allow removal for spot cleaning or replacement | |
| End armrest integration | Two padded end segments provide integrated arm support without additional attachments |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office collaborative lounge zones | Supports 6-person casual group discussion in open plan workspaces | |
|---|---|---|
| Public reception and waiting areas | Low-profile open layout creates welcoming seating for visitors without sightline obstruction |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Strength, durability and safety requirements for non-domestic seating, applicable for commercial lounge use | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignition resistance (smoldering cigarette), required for public space installation |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Performance standard for lounge seating, recommended for commercial office installation verification |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal plywood frame construction | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, required for indoor commercial furniture use | |
| GB/T 29894-2013 | Performance requirements for upholstered furniture for public office and commercial spaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal plywood frame construction; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, required for indoor commercial furniture use; 3. GB/T 29894-2013: Performance requirements for upholstered furniture for public office and commercial spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp