Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	450 × 450 × 450 mm
Overall dimension (dia. x H)	450 x 450 mm
Seating surface diameter	450 mm
Body height (top to base)	430 mm
Base glide height	20 mm
Foam cushion thickness (top)	100 mm
Side upholstery coverage height	430 mm
Footprint diameter	450 mm
Recommended seat height for adult use	450 mm
Upholstered body height	430 mm
Top foam cushion thickness	100 mm
Side upholstery vertical coverage	430 mm
Floor contact footprint diameter	450 mm
Seat height for adult use	450 mm
Top perimeter seam position	10 mm below top surface
Base glide diameter	30 mm
Finished Seat Cushion Thickness	90 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Maximum static seat load	120 kg
Unit net weight	5 kg
Foam density (seat top)	30 kg/m³
Fabric abrasion resistance (reference)	20000 cycles
Glide scratch resistance	Suitable for hard floors and low-pile carpet
Seat foam density	30 kg/m³
Fabric abrasion resistance (Martindale)	20000 cycles
Glide scratch resistance rating	Suitable for hard floors and low-pile carpet
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Top and side upholstery	Woven textile fabric, full-wrap stitched construction
Seat cushion fill	Polyurethane foam padding inside top section
Internal supporting frame	Plywood or solid wood ring frame inside base and side wall
Bottom base panel	Wood-based base board for structural stability
Bottom contact feet	Black plastic non-slip glides
Stitching detail	Single-sewn perimeter seam at top edge
Top edge stitching	Single-sewn perimeter seam with lock-stitch construction
Foam backing layer	Non-woven fabric lining between foam and outer upholstery
Bottom dust cover	Non-woven black fabric dust cover on base underside
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Single-person low seating or footrest use for lounge, office breakout or event spaces
Mobility	Manual repositioning by lifting or sliding on plastic glides
Floor protection	Plastic base glides reduce floor scratching on hardwood, tile and low-pile carpet
Modular arrangement	Multiple units can be grouped in clusters or rows for flexible event seating
Maintenance	Surface spot cleanable with upholstery detergent; non-removable fixed cover
Load support	Vertical static load bearing for seated use up to 120 kg
Auxiliary seating function	Serves as single-person low seating or footrest for lounge, office breakout and event spaces
Manual repositioning	Relocatable by one-person lifting or sliding on base glides
Modular grouping	Multiple units can be arranged in clusters or straight rows for flexible seating layouts
Surface maintenance	Spot cleanable with water-based upholstery detergent; fixed non-removable cover
Static load bearing	Supports vertical static seated load up to 120 kg
Recline Angle / Lock Reference	125° with 3 suggested lock positions

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Carton dimensions	470 x 470 x 470 mm
Gross weight per carton	6 kg
20ft container load quantity	180 pieces
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office breakout and collaboration zones	Used as flexible extra seating for informal meetings and short stay use
Lobby and waiting areas	Arranged in groups to provide casual waiting seating next to sofas and coffee tables
Residential living rooms	Serves as footrest, side table top tray base or occasional accent seat
Event and exhibition spaces	Deployed as temporary seating for pop-up events, galleries and trade shows
Education and co-working spaces	Supports flexible seating arrangements for group work and brainstorming sessions
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520	2015+A1:2019 Furniture - Seating - Test methods for the determination of strength, durability and stability of domestic and contract seating

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

No standards data is available for this market.

Standardized tender description text

This product must meet the following technical requirements:
1. Technical standards and test reports must be supplied during tender or purchase confirmation;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · OTT-CYL-450

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · OTT-CYL-450

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · OTT-CYL-450Open Export Tool

Quick Actions

Post an RFQ

Product Description

KERTE Cylindrical Upholstered Round Ottoman Pouf Set, model OTT-CYL-450, is a versatile seating solution categorized under ottoman and pouf stools. Featuring a uniform cylindrical form with a flat circular top matching the body diameter and no overhanging edge, the piece presents a clean, minimalist silhouette suited to a range of interior aesthetics. A visible single-sewn lock-stitch perimeter seam joins the top and side fabric panels 10 mm below the top surface, adding a subtle structural detail to the full-wrap fabric exterior. The unit stands on small black plastic non-slip glides positioned at the base perimeter, creating a slight elevation above the floor. Constructed with a woven textile fabric upholstery that fully covers the vertical side surface from the top edge down to the base mounting rl, the pouf incorporates a polyurethane foam cushion at the top for seating support. An internal plywood or solid wood ring frame within the base and side wall mntns the structure’s shape, while a wood-based base board provides underlying stability. A non-woven fabric lining sits between the foam and outer upholstery to prevent foam abrasion, and a non-woven black fabric dust cover finishes the base underside. The plastic base glides are engineered to slide without scratching finished floor surfaces. Functionally, the ottoman serves as single-person low seating or a footrest, with a static load bearing capacity of 120 kg. Its lightweight build allows one-person relocation via lifting or sliding on the base glides, with no casters fitted. Multiple units can be arranged in clusters or strght rows to create flexible seating layouts, as their uniform cylindrical shape enables gap-free grouping. Maintenance requires only spot cleaning with water-based upholstery detergent, as the fabric cover is fully stitched in place and non-removable. The pouf is well-suited for both commercial and residential settings. In office breakout and collaboration zones, it provides flexible extra seating for informal meetings and short stays, supporting easy reconfiguration in agile workspaces. For lobby and waiting areas, grouped units offer casual seating alongside sofas and coffee tables, complementing modern and minimalist design schemes. In residential living rooms, it functions as a footrest, side table tray base, or occasional accent seat, with multiple color options to coordinate with sofa sets. For event and exhibition spaces, its light weight facilitates fast layout changes and transport for pop-up events, galleries, and trade shows. It also works in education and co-working environments, where close nesting of units supports flexible group work and brnstorming arrangements. For procurement planning, the ottoman ships in protective packaging sized to accommodate the cylindrical form with padding on all sides. Pallet and contner loading configurations are available for bulk orders, with volume utilization metrics supporting large-scale project planning. The fixed non-removable cover design should be noted for facilities prioritizing machine-washable components, and fabric fiber composition, internal frame specifications, and exact material grades can be confirmed directly with the supplier for project-specific requirements.

Cylindrical Upholstered Round Ottoman Pouf Set Specifications

Suppliers and stock