| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1400 x 700 x 450 mm | |
|---|---|---|
| tabletop thickness | 50 mm | |
| drawer internal dimensions (each) | 450 x 280 x 100 mm | |
| open side shelf internal dimensions (each) | 400 x 600 x 200 mm | |
| floor clearance under side shelves | 150 mm | |
| leg top-to-bottom flare angle | 15 degrees | |
| central storage unit width | 500 mm | |
| tabletop edge chamfer radius | 20 mm | |
| base support frame thickness | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| evenly distributed tabletop static load | 100 kg | |
|---|---|---|
| per-drawer static load capacity | 15 kg | |
| product net weight | 63 kg | |
| finish scratch resistance rating | Class 2 residential use | |
| warranty period | 3 years | |
| available color variants | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop | Walnut wood veneer over MDF substrate, solid wood edge banding, matte clear finish | |
|---|---|---|
| central drawer unit | Matte light grey painted engineered wood, seamless front panel finish | |
| legs and lower frame | 1.5mm thick brushed gunmetal stainless steel, angled tapered profile | |
| drawer slides | Side-mounted 3-section ball-bearing metal slides, full extension design | |
| internal shelf liners | Matching walnut wood veneer over engineered wood, same finish as tabletop | |
| hardware connectors | Zinc-plated steel cam lock and dowel connectors for KD assembly | |
| surface coating | Low-VOC PU clear coat on wood surfaces, scratch-resistant baked paint on drawer fronts | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| central dual drawer storage | Two stacked soft-close drawers for concealed small item storage, operates via push-to-open mechanism | |
|---|---|---|
| dual side open shelves | Two recessed open cubbies on either side of drawer unit for quick-access decor and reading material storage | |
| stability bracing | Full perimeter lower metal frame connects all four legs to prevent racking under uneven floor loading | |
| surface usability | Flat rectangular tabletop supports daily living room items including trays, drinkware, and decorative displays | |
| floor protection | Felt pad inserts at bottom of each metal leg to prevent scratching hard flooring surfaces | |
| assembly structure | Knock-down flat-pack design requiring simple hex-key assembly of legs, frame, and tabletop | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential living room | Placed centrally in front of 3-seat and single-seat sofas for drink, decor, and remote storage | |
|---|---|---|
| lounge reception areas | Suitable for apartment complex or office lounge waiting areas as a central accent table | |
| paired seating configuration | Designed to coordinate with matching same-series end table placed beside sofa arms | |
| modern light luxury interiors | Complements neutral-toned leather/ fabric sofas and stone-textured wall finishes in contemporary interiors | |
| rug placement | Sized to sit fully on standard 2000x3000mm living room area rugs without overhang |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applicable for strength, durability and safety requirements for residential domestic tables | |
|---|---|---|
| EN 13722:2004 | Applicable for test methods for storage units, including drawer strength and cyclic operation |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for general technical requirements of wooden furniture, including dimensional tolerance and surface quality | |
|---|---|---|
| GB 18584-2001 | Applicable for limit of harmful substances in interior decoration wood furniture, formaldehyde emission limit |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for general technical requirements of wooden furniture, including dimensional tolerance and surface quality; 2. GB 18584-2001: Applicable for limit of harmful substances in interior decoration wood furniture, formaldehyde emission limit; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
