Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2400 × 1100 × 750 mm
Overall table dimensions	2400 x 1100 x 750 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight	95 kg
Distributed tabletop load	120 kg
Single-point concentrated load	30 kg
Per-seat vertical load allowance	15 kg
Static floor load	36 kg/sq m
Seating capacity	8 persons
Suggested hardware cyclic service target	10,000 opening cycles
Suggested surface durability target	30,000 abrasion cycles
Seating capacity layout	8 seats
Top Static Load Reference	150 kg uniformly distributed

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop substrate and surface	25 mm engineered-wood core with high-pressure woodgrain laminate and matching impact edge
Built-up edge profile	50 mm laminated edge build-up with rounded corners and exposed dark woodgrain banding
End support panels	Warm-gray painted or melamine-faced engineered-wood panels with square floor contact
Central modesty panel	Warm-gray engineered-wood privacy panel with a horizontal woodgrain lower rail
Cable management hardware	Black rectangular port insert, silver metal or ABS access cover, and brushed metal round grommet
Structural joining hardware	Powder-coated steel corner plates, cam fittings and wood screws with a minimum grade-4.8 fastener specification

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Cable routing system	Two top access points route power and data cables from the tabletop to the under-table cavity
Meeting seating function	Eight-person face-to-face layout with primary seating along both long sides
Privacy and leg screening	Full-width central modesty panel reduces visibility beneath the table while retaining side knee access
Floor mounting and leveling	Freestanding panel-base design with four optional 12 mm adjustable glides for uneven floors

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Packed volume	0.52 CBM
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Corporate meeting room	Suitable for an 8-person conference room where cable ports support laptops, conference phones and display connections.
Managerial discussion or training space	Suitable for rectangular face-to-face meetings, project reviews and small training sessions with standard 750 mm seating height.

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 527-1:2011	Use as dimensional and safety reference for office work-surfaces, including stability and safe edges.
EN 527-2:2014	Use for mechanical safety requirements applicable to fixed-height office tables.
EN 15372:2016	Use for strength, durability and stability requirements for non-domestic storage-integrated or office tables.
EN 13986:2004+A1:2015	Use for engineered-wood board characteristics and CE-related performance documentation.

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	Use for wooden furniture dimensional tolerances, material workmanship and structural inspection of the panel table.
GB/T 3325-2017	Use for metal furniture hardware requirements where metal supports, plates or cable fittings are supplied.
GB 18580-2017	Use for formaldehyde emission limits and acceptance documentation for engineered-wood board components.
GB/T 4893.1-2021	Use for horizontal tabletop resistance to liquid contamination during office-furnitureAcceptance.

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: Use for wooden furniture dimensional tolerances, material workmanship and structural inspection of the panel table.;
2. GB/T 3325-2017: Use for metal furniture hardware requirements where metal supports, plates or cable fittings are supplied.;
3. GB 18580-2017: Use for formaldehyde emission limits and acceptance documentation for engineered-wood board components.;
4. GB/T 4893.1-2021: Use for horizontal tabletop resistance to liquid contamination during office-furnitureAcceptance.;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-R2400-WG-PANEL

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-R2400-WG-PANEL

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-R2400-WG-PANELOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Rectangular Woodgrain Conference Table with Cable Ports and Panel Legs is an unbranded meeting table designed for organized, face-to-face collaboration. Model CT-R2400-WG-PANEL pairs a woodgrain laminate work surface with a warm-gray panel base, giving commercial interiors a balanced visual character that is both structured and understated. Its rectangular top provides seating for eight people, with primary positions arranged along the two long sides. The full-width central modesty panel reduces visibility beneath the table, while the open side areas preserve knee access. A horizontal woodgrain lower rail adds a subtle coordinating detail to the otherwise warm-gray support structure. The 2400 x 1100 x 750 mm table has a finished top thickness of 45 mm and offers 680 mm of knee clearance height with 900 mm of clearance width per main seat. End support panels use painted or melamine-faced engineered wood with square floor contact, creating a clean panel-leg silhouette. The tabletop is built on a 25 mm engineered-wood core, surfaced with high-pressure woodgrain laminate and finished with a matching impact edge. Its 50 mm laminated edge build-up features rounded corners and exposed dark woodgrain banding, which helps define the perimeter and soften the rectangular form. Powder-coated steel corner plates, cam fittings, wood screws, and grade-4.8 minimum fasteners connect the structural components. Two top access points route power and data cables from the work surface into the under-table cavity. Each 80 mm opening is supported by cable management hardware including a black rectangular port insert, silver metal or ABS access cover, brushed metal round grommet, and a cable tray with 120 mm depth. These features make the table practical for laptops, conference phones, and display connections in active meeting spaces. Rated capacity includes a 120 kg distributed tabletop load, 30 kg single-point concentrated load, and 15 kg per-seat vertical load allowance. The table weighs 95 kg and is freestanding, with four optional 12 mm adjustable glides for uneven floors. It is well suited to corporate conference rooms, managerial meeting areas, project review spaces, and small training settings with standard 750 mm seating height. Procurement teams should plan for two cartons per set, a packaged gross weight of 90 kg, 0.55 cubic meter packaging volume, and an assembly reference time of 40 minutes. Access planning should account for the 2100 x 1100 x 300 mm package dimensions and the need to position the table in rooms sized for eight-person face-to-face use.

Rectangular Woodgrain Conference Table with Cable Ports and Panel Legs Specifications

Suppliers and stock