| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3200 x 1380 x 750 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Leg spread (front-to-back) | 1100 mm | |
| Knee clearance height (under top) | 690 mm | |
| Knee clearance width (between front legs) | 2800 mm | |
| Edge profile | 2 mm radius chamfered edge | |
| Wood accent joint width | 180 mm | |
| Floor contact pad diameter | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed tabletop static load | 260 kg | |
|---|---|---|
| Single-point concentrated load | 50 kg | |
| Seating capacity | 10 persons | |
| Tabletop surface abrasion resistance | 2000 cycles | |
| Surface heat resistance | 80 °C | |
| Leg frame static stability load | 450 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | High-density particleboard core | |
|---|---|---|
| Tabletop surface finish | Matte white thermally fused melamine laminate | |
| Leg frame material | 1.5 mm thick cold-rolled steel tube | |
| Leg finish | White matte powder coating | |
| Leg joint accents | Solid oak veneer wrapped MDF | |
| Edge banding | 2 mm thick PVC edge | |
| Floor protection pads | TPE non-marring glides | |
| Internal support frame | 1.2 mm thick steel cross bracing | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Structure type | Fixed freestanding assembly | |
|---|---|---|
| Assembly requirement | Knock-down construction | |
| Surface function | Flat continuous work surface | |
| Stability feature | Triangular wishbone leg bracing | |
| Cable management compatibility | Pre-drilled grommet-ready surface | |
| Floor protection | Height-adjustable glide pads | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Corporate boardrooms | Formal meeting spaces for 10person executive meetings and presentations | |
|---|---|---|
| Training rooms | Configurable space for internal training, workshops, and group activities | |
| Open office collaboration zones | Dedicated long table for cross-team collaborative work sessions | |
| Professional service offices | Client meeting spaces for law, consulting, and design firms | |
| Higher education meeting spaces | Faculty and administrative meeting rooms in campus buildings |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office worktables, safety and dimensional requirements for office table products | |
|---|---|---|
| EN 15372:2016 | Office furniture, strength, durability and stability requirements for tables | |
| EN 13722:2004 | Furniture, test methods for surface resistance to abrasion and wear |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products standard, applicable for commercial office table performance testing |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden office furniture, applicable to tabletop panel construction | |
|---|---|---|
| GB/T 3327-2018 | Office furniture desks and tables, specifies dimensional and stability requirements | |
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, required for indoor commercial use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden office furniture, applicable to tabletop panel construction; 2. GB/T 3327-2018: Office furniture desks and tables, specifies dimensional and stability requirements; 3. GB 18580-2017: Formaldehyde emission limits for wood-based panels, required for indoor commercial use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
