| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1400 x 800 x 410 mm | |
|---|---|---|
| Tabletop thickness | 38 mm | |
| Wood inlay strip width | 200 mm | |
| Tabletop overhang (front/back) | 80 mm | |
| Tabletop overhang (left/right ends) | 120 mm | |
| Central under-table gap width | 620 mm | |
| Floor clearance under base | 20 mm | |
| Corner radius of tabletop | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed tabletop static load capacity | 50 kg | |
|---|---|---|
| Product net weight | 37 kg | |
| Surface scratch resistance rating | 3000 cycles | |
| Supported finish color count | 2 | |
| Surface heat resistance | 80 °C | |
| Warranty period | 365 days | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer tabletop panel | 18mm MDF substrate with dark matte lacquer finish | |
|---|---|---|
| Central tabletop inlay | 0.6mm dark wood veneer over MDF core | |
| Pedestal block bodies | 25mm particle board with matching dark matte lacquer | |
| Base plinth feet | Hard plastic dark grey glides | |
| Tabletop edge detailing | Stepped layered lacquer trim | |
| Internal joint connectors | 50mm cam lock and dowel hardware | |
| Lacquer coating thickness | 0.15mm polyurethane matte topcoat | |
| Substrate moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Surface placement function | Flat load-bearing top for drinks, decor, books and small household items | |
|---|---|---|
| Central under-table open gap | Unobstructed floor-level space for storage of low baskets or ottomans | |
| Floor protection design | Recessed plastic glides on plinth feet prevent scuffing on hard flooring | |
| Cleaning compatibility | Smooth non-porous lacquer surface wipes clean with damp soft cloth | |
| Assembly requirement | Knock-down assembly with included cam hardware connecting top to pedestals | |
| Weight distribution design | Dual end pedestal supports eliminate wobble across full tabletop span | |
| Pedestal block length (each end) | 350 mm | |
| Pedestal block height | 280 mm | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Suitable interior styles | Modern minimalist, contemporary light luxury, urban modern interiors | |
|---|---|---|
| Recommended pairing | Matched modular fabric or leather sofas in dark grey, black or neutral tones | |
| Space size suitability | Medium to large living rooms in apartments and homes | |
| Surface use cases | Display of decorative objects, serving drinks and snacks, holding reading materials | |
| Placement restriction | Not suitable for outdoor use or high-moisture areas like bathrooms |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, performance benchmark for residential use | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface finishes, applicable for lacquer durability validation |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and finish checks | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, required for indoor air quality compliance | |
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture finishes, applicable for surface durability checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and finish checks; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, required for indoor air quality compliance; 3. GB/T 4893.8-2013: Surface wear resistance test method for furniture finishes, applicable for surface durability checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
