| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1800 x 700 x 460 mm | |
|---|---|---|
| tabletop thickness | 51 mm | |
| tabletop corner radius | 40 mm | |
| base height | 330 mm | |
| floor clearance height | 80 mm | |
| cable slot length (each) | 200 mm | |
| cable slot width (each) | 15 mm | |
| cable slot spacing (center to center) | 700 mm | |
| fluted rib width (base) | 8 mm | |
| base cutout width (each) | 400 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net weight | 28 kg | |
|---|---|---|
| distributed tabletop static load | 151 kg | |
| point load capacity (center of top) | 45 kg | |
| tabletop horizontal surface uniformity | 0.5 mm/m | |
| finish abrasion resistance | 4000 cycles | |
| warranty period | 2 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop substrate | 18mm MDF core with walnut wood grain veneer | |
|---|---|---|
| tabletop surface finish | Matte clear polyurethane coating, 0.1mm film thickness | |
| base outer frame panels | 1.5mm brushed 304 stainless steel with vertical fluting | |
| base internal support structure | 1.2mm powder-coated steel tubular reinforcement | |
| base foot pads | 8mm diameter non-slip rubber glides, 5mm height | |
| cable slot inserts | Brushed stainless steel trim with soft PVC edge gasket | |
| base corner joints | Mitered welded stainless steel seams, polished flush | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| integrated cable routing | Two linear recessed slots pass cords from tabletop to under-base channels | |
|---|---|---|
| floor protection glides | Fixed rubber foot pads prevent scratching hard flooring and stabilize placement | |
| under-clearance floor access | Three open cutouts under the plinth allow robotic vacuum access and cord routing | |
| fixed height support | Plinth base maintains stable lounge-height surface with no moving adjustment parts | |
| surface usability | Low-profile wide top supports display objects, beverage service and remote controls | |
| base ventilation | Open cutouts prevent trapped moisture under the table on hard flooring | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| shipping carton dimensions | 1860 x 760 x 150 mm | |
|---|---|---|
| gross shipping weight | 33 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential living room | Placed in front of sofas for beverage, decor and media device placement | |
|---|---|---|
| lounge reception area | Used in hotel or office waiting areas for guest refreshments and reading materials | |
| contemporary open-plan space | Matches modern minimalist, luxury or industrial interior design schemes | |
| media-adjacent placement | Supports soundbars, media devices with routed cords via integrated tabletop slots | |
| low-traffic formal space | Not suitable for high-impact commercial use or outdoor placement |
EU Market Access Requirements* EN Standards
| EN 15372:2008 | Safety, strength and durability requirements for domestic tables, applicable to structural load validation | |
|---|---|---|
| EN 12521:2015 | Strength and stability requirements for residential seating-adjacent tables, applicable to stability testing |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood-composite tabletop performance validation | |
|---|---|---|
| GB/T 4893.8-2013 | Surface abrasion resistance test for wood furniture finishes, applicable to tabletop coating validation | |
| GB 18584-2001 | Formaldehyde emission limit for interior wooden furniture, applicable to substrate material acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood-composite tabletop performance validation; 2. GB/T 4893.8-2013: Surface abrasion resistance test for wood furniture finishes, applicable to tabletop coating validation; 3. GB 18584-2001: Formaldehyde emission limit for interior wooden furniture, applicable to substrate material acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
