| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 610 x 483 mm | |
|---|---|---|
| Tabletop thickness | 40 mm | |
| End support panel thickness | 50 mm | |
| Right open storage nook dimensions | 300 x 550 x 200 mm | |
| Central under-table floor clearance | 140 mm | |
| Tabletop edge bevel radius | 15 mm | |
| Base panel bottom edge radius | 20 mm | |
| Horizontal connecting apron height | 220 mm | |
| Open knee gap width | 700 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total tabletop distributed static load | 145 kg | |
|---|---|---|
| Integrated side nook static load | 15 kg | |
| Product net weight | 27 kg | |
| Surface scratch resistance rating | 2B | |
| Recommended maximum user weight for edge seating | 100 kg | |
| Warranty period | 12 months | |
| Available color variants | 3 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | 18mm E1 grade particleboard core | |
|---|---|---|
| Tabletop surface | Dark brown walnut wood veneer with matte lacquer seal | |
| Base panel core | 25mm E1 grade MDF core | |
| Base panel finish | Matte dark charcoal polyurethane lacquer coating | |
| Structural connectors | Zinc-plated steel cam-lock fasteners with 8mm wooden dowels | |
| Floor protection pads | 3mm thick non-slip rubber pads under all base contact points | |
| Edge banding | 1mm thick PVC edge banding matched to panel finish | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Integrated side storage nook | Open recessed compartment on right base for books, remotes or decor | |
|---|---|---|
| Floor leveling | Fixed rubber base pads, no adjustable height feet | |
| Surface utility | Smooth sealed top supports drinkware, decor, books and casual serving | |
| Assembly requirement | Knock-down assembly with included hex key and hardware | |
| Safety edge design | Rounded beveled edges on top and base reduce impact injury risk | |
| Floor protection | Rubber contact pads prevent scuffing on hard flooring surfaces | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Placed in front of sofas for beverage service, decor and media accessory storage | |
|---|---|---|
| Small apartment spaces | Compact 1200mm length fits open-plan or compact lounge layouts without overcrowding | |
| Lounge reception areas | Suitable for casual office or hospitality lobby seating areas as a low accent table | |
| Recommended surface use | Supports tray service, decorative objects, books, and remote control storage without height adjustment | |
| Care and maintenance | Wipe clean with soft dry cloth, avoid prolonged contact with wet or abrasive materials |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 13722:2004 | Furniture - assessment of surface resistance to cold liquids |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for domestic market | |
|---|---|---|
| GB 18584-2001 | Limit of formaldehyde emission for wooden furniture, required for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for domestic market; 2. GB 18584-2001: Limit of formaldehyde emission for wooden furniture, required for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
