| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3000 x 1800 x 1100 mm | |
|---|---|---|
| Staff work surface height | 750 mm | |
| Front counter overhang height | 1050 mm | |
| Central knee clearance width | 1400 mm | |
| Knee clearance height under worktop | 680 mm | |
| Side cabinet dimensions (each) | 800 x 600 x 750 mm | |
| Worktop thickness | 38 mm | |
| Edge banding thickness | 2 mm | |
| Cable grommet diameter | 80 mm | |
| Base panel thickness | 50 mm | |
| Side cabinet door panel thickness | 25 mm | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total static worktop load capacity | 800 kg | |
|---|---|---|
| Staff seating capacity | 2 people | |
| Drawers/cabinets lock cycle rating | 50000 cycles | |
| Drawer slide load rating per drawer | 45 kg | |
| Surface scratch resistance rating | 2000 revolutions | |
| Product net weight reference | 220 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main worktop | 38mm high-density MDF core with matte white baked lacquer finish | |
|---|---|---|
| Lower front base panel | 50mm high-density particleboard core with dark brown matte laminate veneer | |
| Side cabinet doors | 25mm MDF with frosted white acrylic inset panel and rounded white frame | |
| Edge treatment | 2mm thick PVC edge banding with rounded radius corners | |
| Cable grommets | ABS plastic with brushed white top cover | |
| Structural support frame | 1.5mm thick powder-coated steel internal frame | |
| Cabinet hinges | Cold-rolled steel soft-close concealed hinges | |
| Drawer slides (if fitted) | Three-section cold-rolled steel full-extension ball-bearing slides | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Cable management system | Two 80mm diameter desk grommets connect to under-desk cable tray for wire routing | |
|---|---|---|
| Flanking side storage | Two enclosed low cabinet units on left and right provide lockable office supply storage | |
| Central seated access | Open knee clearance recess accommodates two office chairs for reception staff work | |
| Raised front counter | Elevated front panel creates guest transaction surface separating staff and visitor space | |
| Soft close cabinet doors | Concealed hinges enable 110-degree door swing with auto-soft-close at final travel | |
| Surface cleaning compatibility | Matte non-porous finish supports disinfection with standard commercial office cleaners | |
| Logo mounting provision | Flat upper front panel supports custom company logo applique or mounting | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
| Commercial office lobby | Suitable for company main entrance reception points for guest check-in and visitor management | |
|---|---|---|
| Hotel front desk | Supports dual-station guest check-in and concierge service in hotel lobbies | |
| Medical clinic reception | Provides transaction counter and staff workspace for patient check-in and administration | |
| Co-working space entry | Serves as membership check-in and information point for shared office facilities | |
| Salon/service center reception | Supports appointment booking and payment processing for customer-facing service businesses | |
| Recommended matching furniture | Pairs with ergonomic reception office chairs, visitor seating, and potted decorative plants |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Applies to office work desk dimensional and safety requirements | |
|---|---|---|
| EN 15372:2008 | Applies to durability and strength requirements for office storage furniture |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Applies to desk products strength, durability and structural stability testing |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | Applies to general technical requirements for wooden office furniture | |
|---|---|---|
| GB/T 4897.3-2003 | Applies to particleboard used for furniture structural components | |
| GB 18584-2001 | Applies to formaldehyde emission limits for interior wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applies to general technical requirements for wooden office furniture; 2. GB/T 4897.3-2003: Applies to particleboard used for furniture structural components; 3. GB 18584-2001: Applies to formaldehyde emission limits for interior wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
