Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1800 × 600 × 1100 mm
rear staff work surface height	750 mm
raised transaction shelf height from floor	1100 mm
raised transaction shelf depth	300 mm
front curved corner radius	200 mm
brushed stainless steel toe kick height	100 mm
staff knee clearance height under worktop	600 mm
staff knee clearance depth under worktop	450 mm
work surface panel thickness	25 mm
front facade panel thickness	18 mm
edge band thickness	2 mm
chrome support post diameter	50 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

main work surface static load capacity	100 kg
product net weight	110 kg
surface scratch resistance rating	2000 cycles
surface stain and water resistance	Level 4
recommended maximum user capacity	1 receptionist
internal drawer slide load rating (if fitted)	25 kg
drawer slide cycle rating (if fitted)	50000 cycles
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

main body carcass	18mm thick E1-grade MDF substrate
front facade finish	White matte melamine or low-sheen paint finish
raised transaction shelf	25mm thick wood-tone melamine-faced engineered wood
shelf support posts	Polished chrome-plated steel cylindrical posts
base toe kick	Brushed stainless steel full-width plinth trim
work surface edging	2mm thick matching white PVC/ABS edge banding
internal cabinet panels	16mm thick engineered wood with matching finish
cable management grommets	ABS plastic 60mm diameter grommets at work surface rear
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

visitor transaction function	Raised 1100mm high front shelf separates staff and visitors for greeting and sign-in
staff work area	Rear 750mm high work surface supports monitor, keyboard and office equipment placement
cable management	Rear-positioned cable grommets route power and data cables from equipment to floor
internal storage configuration	Internal lockable drawer and open storage compartment under work surface for supplies
freestanding installation	Floor-standing unit requires no wall fixing for stable placement
curved front safety design	Soft rounded left front corner eliminates sharp edges for high-foot-traffic entry areas
cleanability	Smooth non-porous front and top surfaces allow wipe-clean daily maintenance
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

shipping carton dimensions	2000 x 700 x 1200 mm
shipping gross weight	120 kg
required assembly time	50 minutes
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

small office entry lobby	Compact footprint fits 200sqm office reception areas without occupying excess circulation space
retail and salon reception	Low profile and curved front suits small boutique, salon or dental clinic front desks
single-receptionist operations	Single-station layout supports one staff member greeting visitors and managing admin tasks
modern minimalist office interiors	White and natural wood finish with metal trim matches contemporary neutral office design schemes
temporary pop-up reception areas	Freestanding design allows repositioning for event or temporary front-desk setups

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 527-1:2011	Office worktables safety and strength requirements for staff work surface performance
EN 13722:2004	Office furniture storage units structural stability and durability for internal cabinetry

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to panel and finish quality acceptance
GB 18580-2017	Formaldehyde emission limits for wood-based panels, required for indoor office air quality compliance
GB/T 4897.3-2003	Particleboard specifications for furniture-grade substrate structural performance verification

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to panel and finish quality acceptance;
2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, required for indoor office air quality compliance;
3. GB/T 4897.3-2003: Particleboard specifications for furniture-grade substrate structural performance verification;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · RCP-C1800-WW-SS

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · RCP-C1800-WW-SS

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · RCP-C1800-WW-SSOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Compact Curved Single-Station Reception Desk with Raised Wood-Tone Transaction Shelf is a freestanding modern reception unit designed for streamlined front-of-house operations. Its visual profile features a smooth curved front edge with a soft rounded left corner, paired with a dual-level worktop layout that creates clear separation between staff and visitor zones. The body carries a crisp white matte finish, contrasted by a warm wood-tone raised transaction shelf, polished chrome cylindrical support posts, and a full-width brushed stainless steel toe kick for a sleek, contemporary aesthetic aligned with minimalist interior schemes. Constructed for durable daily use, the desk’s main body carcass uses E1-grade MDF substrate, with 2mm thick matching white PVC/ABS edge banding protecting work surface perimeters. The raised transaction shelf is made of thick melamine-faced engineered wood, supported by chrome-plated steel posts, while internal cabinet panels use matching finished engineered wood. Load-bearing top sections incorporate composite build-up for stable performance, and ABS plastic cable management grommets are positioned at the rear of the work surface. Surfaces are non-porous to support simple wipe-clean daily maintenance, with tested scratch, stain and water resistance suited to high-activity entry spaces. Functionally, the dual-height design supports both guest interaction and staff workflow: the raised front shelf sits at standing height for greeting, sign-in and casual visitor transactions, while the lower rear work surface is sized to hold a monitor, keyboard and standard office equipment, with dedicated knee clearance for seated use. Integrated cable grommets route power and data cables neatly to the floor, while under-worktop storage includes a lockable drawer and open compartment for office supplies. The unit stands stably without wall fixing, allowing flexible repositioning as needs change. This desk is well suited for small office entry lobbies, boutique retail spaces, salons, dental clinics and single-receptionist operations, as well as temporary pop-up or event reception setups, with a compact footprint that preserves circulation space. When procuring, note the unit ships in separate cartons, requires on-site assembly, and is rated to support one receptionist, with specified static load limits for the main work surface and internal drawers if fitted. The neutral two-tone finish pairs easily with a range of modern commercial and residential entry space palettes.

Compact Curved Single-Station Reception Desk with Raised Wood-Tone Transaction Shelf Specifications

Suppliers and stock