Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	760 × 770 × 1270 mm
Seat width	570 mm
Seat depth	520 mm
Seat height adjustment range	570 mm (floor to seat top)
Backrest height	730 mm
Five-star base radius	350 mm
Caster wheel diameter	50 mm
Seat cushion thickness	160 mm
Retractable footrest extension length	420 mm
Armrest height above seat	230 mm
Headrest height	220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended maximum user weight	181 kg
Gas lift rated static load	150 kg
Chair net weight	22 kg
Seat foam density	50 kg/m³
Backrest foam density	35 kg/m³
Foam rebound rate	60%
Caster rolling durability	100000 cycles
Recline mechanism cycle life	50000 cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Upholstery	1.2mm thick light gray PU leather with abrasion resistance 50000 cycles
Seat cushion core	High-density polyurethane foam, dual-layer construction
Backrest padding	High-density polyurethane foam with segmented contoured shaping
Internal frame	1.5mm thick welded steel tube frame with powder-coated finish
Internal support board	12mm thick multi-layer wooden board under seat cushion
Five-star base	2.0mm thick chrome-plated steel five-star caster base
Armrests	Padded PU top on 3mm thick die-cast aluminum support brackets
Casters	50mm diameter PU soft tread casters with nylon hubs
Recline adjustment hardware	Zinc-plated steel recline lever and locking mechanism
Side trim panels	Textured gray mesh-accented PU trim on seat sides
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Swivel function	360-degree full rotation around central gas lift axis
Pneumatic height adjustment	120mm vertical travel via Class 4 gas lift, lock at any height
Recline function	140-degree maximum backrest recline with stepless position locking
Tilt tension control	Adjustable recline tension via side dial to match user weight
Retractable footrest	Slide-out extendable footrest under seat, stores flush when not in use
Head support	Integrated padded fixed headrest for neck support during upright or reclined use
Mobility	Dual-wheel casters roll freely on hard floors and low-pile carpet
Arm support	Fixed curved padded armrests positioned for forearm support during typing
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Executive private office	Suitable for manager/executive workspaces requiring ergonomic support for 8+ hour workdays
Home office study	Ideal for premium home workspaces combining professional function and napping capability
Conference room leadership seating	Appropriate for head-of-table positions in formal conference rooms
Executive reception areas	Suitable for VIP visitor seating in high-end reception zones
Commercial procurement projects	Configurable for bulk office furniture tenders with standard BIFMA-aligned performance targets
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1335-1:2020	Applies to office chair dimensional safety and ergonomic requirements
EN 1335-2:2018	Applies to office chair structural strength and durability test methods

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1-2017	Applies to general-purpose office chair strength, durability and stability

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3326-2016	Applies to office furniture dimensional tolerances for chair fit and measurement
GB/T 35607-2017	Applies to green product evaluation for office furniture VOC limits

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3326-2016: Applies to office furniture dimensional tolerances for chair fit and measurement;
2. GB/T 35607-2017: Applies to green product evaluation for office furniture VOC limits;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · EXC-REC-LG-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · EXC-REC-LG-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · EXC-REC-LG-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Light Gray PU Leather Reclining Executive Office Chair with Retractable Footrest, model EXC-REC-LG-001 from an unbranded line, delivers a polished, ergonomic seating solution tailored for premium professional and personal workspaces. Visually, the chair features a streamlined high-back profile upholstered in smooth light gray PU leather, paired with a reflective chrome-plated steel five-star base that complements modern executive decor. Its overall dimensions measure 760 x 770 x 1270 mm, with a 570 mm wide, 520 mm deep seat, 730 mm tall contoured backrest, and integrated fixed padded headrest, creating a balanced, substantial silhouette suited to authoritative settings without appearing bulky. Construction centers on durable, purpose-built materials: 1.2mm thick abrasion-resistant light gray PU leather covers high-density dual-layer seat foam and segmented contoured backrest foam, with 160mm thick seat cushioning for long-session comfort. The internal structure uses a 1.5mm thick welded powder-coated steel tube frame, supported by a 12mm multi-layer wooden board beneath the seat, while armrests combine padded PU tops with 3mm thick die-cast aluminum brackets. The 2.0mm thick chrome-plated steel five-star base mounts 50mm diameter dual-wheel PU soft tread casters with nylon hubs, and all recline hardware uses zinc-plated steel for long-term reliability. Functionality is built for extended daily use: the chair offers 360-degree swivel, pneumatic height adjustment with 120mm vertical travel via a Class 4 gas lift, a 140-degree maximum backrest recline with stepless position locking, and adjustable tilt tension controlled via a side dial to match user weight. A slide-out retractable footrest stores flush under the seat when not in use, deploying to support relaxed positioning or short rest breaks, while the soft casters roll smoothly across hard floors and low-pile carpet. The chair supports a maximum recommended user weight of 181 kg, with foam rated for 60% rebound and casters tested to 100000 rolling cycles for consistent performance. This model fits a range of spaces: it works well for executive private offices supporting 8+ hour workdays, premium home offices that blend work functionality with reclined rest capability, head-of-table positions in formal conference rooms, and high-end executive reception areas for VIP visitors. It pairs optimally with a 2.4 m executive desk. For procurement, note that each unit ships in 2 cartons, requires 40 minutes of assembly, and is configured for bulk commercial tenders with performance aligned to standard industry targets, with 135 sets fitting a 20GP container at 85% space utilization. The packaged gross weight per set is 23 kg.

Light Gray PU Leather Reclining Executive Office Chair with Retractable Footrest Specifications

Suppliers and stock