Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	680 × 720 × 1280 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended user weight capacity	150 kg
Static seat proof load target	960 kg
Back cyclic durability target	120,000 cycles
Seat slider or mechanism cycles	100,000 cycles
Caster rolling durability target	100,000 cycles
Swivel cycle target	100,000 cycles
Arm downward load target	45 kg per arm
Net weight	24 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Outer upholstery	Top-grain leather or protected leather-look surface, tan color with tailored edge stitching
Seat foam	Molded polyurethane cushion, 90 mm thick, target density 45 kg/m3
Back padding	Polyurethane comfort layer, 20 mm thick over contoured inner shell
Headrest padding	Polyurethane foam, 80 mm thick, wrapped in matching tan upholstery
Inner back shell	Molded plywood or reinforced polypropylene shell, 12 mm structural thickness
Seat support board	12 mm molded plywood or engineered composite seat board
Arm pads	80 mm-wide padded upholstered tops with black underside trim
Arm supports	Polished die-cast aluminum or aluminum-clad steel cantilever frames
Central mechanism	Black powder-coated steel synchro-tilt mechanism, 4 mm plate target
Gas lift	Black-collar steel gas lift, 50 mm outer tube and class-4 specification target
Five-star base	Polished die-cast aluminum five-star base, 3 mm equivalent wall target
Casters	Black and chrome twin-wheel hard-floor casters with 60 mm wheels

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Height adjustment	Pneumatic seat-height lift with 100 mm travel, operated by a right-side lever
Synchro tilt	Synchronized seat-and-back recline with 18-degree maximum back tilt and linked seat tilt
Tilt lock	Multi-position locking at 4 recline positions through the control lever
Tilt tension	Knob-adjusted recline resistance for users up to 150 kg
Swivel	360-degree continuous swivel around the central gas-lift axis
Arm support	Fixed cantilever armrests with padded contact pads 230 mm above the seat
Mobility	Five twin-wheel casters provide rolling mobility on hard floors and low-pile carpet
Head and neck support	Integrated high headrest cushion provides upper-back and neck contact during reclined work
Posture support	Contoured high back provides shoulder, upper-back and lumbar contact zones
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Carton count	1 flat-packed or partly assembled carton
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Executive office	Suits private manager and director offices where a high-back leather chair conveys a formal appearance
Meeting room	Suitable for long conference seating with padded seat, armrests and rolling mobility
Private workstation	Supports daily computer and desk work behind a 720 to 760 mm executive desk
Consultation space	Appropriate for client meetings and consultation rooms requiring polished arm detailing
Hard-floor workspace	Use with wood, tile or sealed concrete floors when soft-tread twin casters are confirmed
Commercial procurement package	Suitable for projects specifying one chair per workstation with a 150 kg user-load target
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1335-1 office chair dimensions	Applicable standards and test results require confirmation
EN 1335-2 mechanical safety	Use for structural safety, stability and caster-related office-chair requirements
EN 1335-3 test methods	Use for strength, durability and backrest cyclic testing during incoming inspection

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1 office chairs	Use for back, seat, base, arm, caster and stability verification in commercial projects

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357 furniture mechanical test applicability	Use for static load, durability and stability test methods on seat, back and arms
GB 17927-2011 upholstered furniture safety applicability	Use for safety and structural requirements if the chair is supplied as upholstered furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357 furniture mechanical test applicability: Use for static load, durability and stability test methods on seat, back and arms;
2. GB 17927-2011 upholstered furniture safety applicability: Use for safety and structural requirements if the chair is supplied as upholstered furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · EXEC-HB-TAN-ALU-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · EXEC-HB-TAN-ALU-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · EXEC-HB-TAN-ALU-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The High-Back Brown Leather Executive Swivel Chair, model EXEC-HB-TAN-ALU-01, presents a formal executive seating profile with a tall upholstered back, integrated padded headrest, contoured lumbar region, and fixed cantilever arms. Its tan leather or protected leather-look surface is finished with tailored edge stitching, contrasted by polished aluminum arm and base detailing and a black steel central mechanism. The five-star base supports the chair’s traditional office silhouette while maintaining clear spacing between the armrests and a structured, high-back appearance suited to professional interiors. Construction combines layered comfort with a supportive internal frame. The seat uses a molded polyurethane cushion at 90 mm thickness, while the back includes a polyurethane comfort layer over a molded plywood or reinforced polypropylene inner shell. The headrest is padded with matching foam and upholstery, and the 80 mm-wide arm pads provide upholstered contact surfaces with black underside trim. Arm supports are produced as polished die-cast aluminum or aluminum-clad steel cantilever frames. The synchro-tilt mechanism uses black powder-coated steel, with a gas lift and twin-wheel casters completing the moving structure. Functionality is designed for desk-based executive work. A right-side lever controls pneumatic seat-height adjustment with 100 mm of travel, while the synchronized seat-and-back mechanism allows an 18-degree maximum back tilt with linked seat movement. Users can lock the recline in four positions and adjust tilt resistance through a tension knob suited to the 150 kg recommended user weight capacity. The chair also provides continuous 360-degree swivel and rolling mobility through five twin-wheel casters intended for hard floors and low-pile carpet. Floor compatibility should be checked when selecting caster tread type, particularly for wood, tile, or sealed concrete surfaces. This model fits private manager and director offices, formal meeting rooms, daily private workstations, and client consultation areas. Its polished arm treatment and high-back shape make it especially appropriate where a refined managerial appearance is required. The chair is suitable for one-chair-per-workstation procurement planning and pairs with executive desk setups described for 720 to 760 mm desk heights. Buyers should confirm upholstery choice, caster specification, arm construction, and final packaging format before purchase. The product is supplied unbranded and may arrive flat-packed or partly assembled; reference logistics indicate one set with an assembly time of 40 minutes and a packaged gross weight of 23 kg per set. Durability targets cover static seat loading, cyclic back, mechanism, caster, swivel, and arm-load testing, but project specifications should verify the exact production configuration and warranty terms.

High-Back Brown Leather Executive Swivel Chair Specifications

Suppliers and stock