Name: Two-Tone Upholstered Cantilever Conference Office Chair
Brand: KANAITE
SKU: DS7W8U

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	650 × 700 × 1120 mm
Seat height from floor	460 mm
Seat usable width	500 mm
Seat usable depth	500 mm
Backrest height above seat	560 mm
Backrest width	480 mm
Armrest height from seat	220 mm
Cantilever base footprint width	520 mm
Cantilever base footprint depth	620 mm
Seat foam thickness	80 mm
Backrest foam thickness	60 mm
Chrome frame tube diameter	25 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight per chair	20 kg
Recommended static load capacity	181 kg
Upholstery abrasion resistance	50000 cycles
Foam density (seat and back)	40 kg/m³
Foam rebound rate	60%
Seam stitch pitch	8 stitches per 30mm
Chrome frame static load rating	260 kg
Limited commercial warranty	7 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Primary upholstery (seat/back/arm fronts)	Light taupe PU faux leather, 1.2mm thickness, matte finish
Side panel upholstery	Dark brown quilted PU faux leather, diagonal stitching detail
Seat internal core	18mm plywood base layered with 80mm high-density foam
Backrest internal core	1.5mm welded steel frame with spring support, 60mm shaped foam
Armrest structure	Fully upholstered integrated padded design over steel support brackets
Cantilever base frame	2.0mm thick cold-rolled steel, polished chrome plating finish
Floor contact glides	Nylon non-scuff pads affixed to all four base contact points
Stitching hardware	High-tensile bonded nylon thread for reinforced seam construction
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Base movement	Fixed non-swivel, non-caster cantilever sled design with slight flex under load
Posture support	Contoured seat and mid-high back with integrated lumbar curve for upright meeting posture
Arm support	Fixed padded wrap-around armrests positioned for neutral elbow rest during meetings
Floor protection	Nylon glides on base feet prevent scratching hard floor surfaces without casters
Upholstery maintenance	Smooth faux leather surface allows wipe-cleaning with standard office disinfectants
Seating stability	Wide sled base footprint provides anti-tip stability for commercial meeting spaces
Stacking capability	Non-stackable fixed frame design suitable for permanent conference room placement
Adjustability	No height, tilt, or swivel adjustments, designed for static visitor/meeting use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Corporate boardrooms	Suitable for permanent conference table seating with consistent professional aesthetic
Office reception areas	Appropriate for guest waiting seating with durable easy-clean upholstery
Executive private offices	Works as guest seating opposite executive desks for formal visitor interactions
Training room facilities	Suitable for fixed training room seating layouts requiring stable, non-rolling chairs
Healthcare consultation rooms	Appropriate for professional patient/visitor seating with wipe-clean surfaces
Hotel business centers	Suitable for hotel meeting room and business lounge guest seating
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1335-1:2020	Applicable office seating dimensional, safety and strength requirement for non-adjustable conference chairs
EN 1335-2:2018	Applicable office seating strength, durability and stability test standard for contract visitor seating
EN 1022:2018	Applicable domestic and contract seating stability test method for upright seating products

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1-2017	Applicable general-purpose office chair safety and durability test standard for side/visitor seating
ANSI/BIFMA X5.4-2020	Applicable lounge and public area seating standard for reception/conference visitor chairs

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	Applicable general technical requirement for wooden and upholstered office furniture strength and stability
GB/T 16799-2008	Applicable performance standard for polyurethane (faux) leather upholstery furniture use
GB 18584-2001	Applicable limit standard for harmful substance emissions from interior furniture materials

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: Applicable general technical requirement for wooden and upholstered office furniture strength and stability;
2. GB/T 16799-2008: Applicable performance standard for polyurethane (faux) leather upholstery furniture use;
3. GB 18584-2001: Applicable limit standard for harmful substance emissions from interior furniture materials;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CNF-CAN-2TQ-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CNF-CAN-2TQ-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CNF-CAN-2TQ-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The KANAITE Two-Tone Upholstered Cantilever Conference Office Chair, model CNF-CAN-2TQ-01, delivers a polished, professional seating solution designed for consistent use across formal and semi-formal commercial and residential-adjacent spaces. Its visual design balances refined contrast and structured comfort: primary upholstery across the seat, backrest, and arm fronts uses light taupe matte PU faux leather, paired with dark brown quilted PU side panels accented by diagonal stitching for subtle textural depth. The chair features a fixed non-swivel cantilever sled base finished in polished chrome, with integrated fully upholstered wrap-around armrests that create a streamlined, uninterrupted silhouette suited to coordinated room layouts. Construction prioritizes long-term durability and consistent support. The 2.0mm thick cold-rolled steel cantilever frame holds a static load rating well above standard guest seating requirements, with four nylon non-scuff glides at floor contact points. The seat core pairs a bent plywood support base with layered high-density foam, while the backrest uses a welded steel internal frame with spring support and shaped foam, cut to create a mid-high profile with an integrated lumbar curve tailored for upright meeting posture. All upholstery seams use high-tensile bonded nylon thread for reinforced construction, with consistent stitch spacing for even wear; the PU upholstery offers robust abrasion resistance, and the foam core delivers balanced rebound for extended seated comfort. Functional design supports low-maintenance, stable use: the fixed sled base provides gentle flex under load and anti-tip stability, with no casters to prevent unintended movement during meetings or conversations. The smooth faux leather surface wipes clean easily with standard office disinfectants, and fixed padded armrests are positioned to support neutral elbow positioning for users. The chair is non-stackable, intended for permanent placement rather than frequent reconfiguration. It fits seamlessly in corporate boardrooms, office reception waiting areas, executive private office guest positions, fixed-layout training rooms, healthcare consultation spaces, and hotel business center meeting and lounge areas. For procurement teams, note that each chair ships in two cartons, with a referenced assembly time per unit, and standardized packaging dimensions support consistent load planning for bulk orders. The fixed, non-rolling design makes it ideal for spaces where predictable, stable seating is a core requirement, and the two-tone finish coordinates with a wide range of wood, metal, and neutral-toned interior finishes.

Two-Tone Upholstered Cantilever Conference Office Chair Specifications

Suppliers and stock