Product supplierHigh-Back Executive Swivel Chair, Ivory upholstered surface with visible horizontal seam and padded cushion; leather or PU grade requires BOM confirmation
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 660 × 680 × 1180 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 160 kg | |
|---|---|---|
| Net weight | 24 kg | |
| Seat foam density | 45 kg/m3 high-resilience polyurethane foam | |
| Back foam density | 35 kg/m3 polyurethane foam | |
| Foam rebound performance | 40 percent rebound | |
| Fabric or leather surface abrasion resistance | 50,000 Martindale cycles | |
| Gas lift vertical stroke | 100 mm | |
| Tilt mechanism static load | 200 kg | |
| Caster rolling durability | 100,000 rolling cycles | |
| Recommended warranty | 5 years structural warranty |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Ivory upholstered surface with visible horizontal seam and padded cushion; leather or PU grade requires BOM confirmation | |
|---|---|---|
| Backrest upholstery | Ivory upholstered high-back panel with horizontal lumbar seam and tailored edge piping | |
| Arm pads | Ivory upholstered top pads with rounded front edges over rigid arm supports | |
| Arm side panels | Dark charcoal rigid side panels with a smooth molded surface and protective side profile | |
| Inner seat support | 15 mm molded plywood or steel-reinforced composite seat board under the cushion | |
| Back internal frame | 20 mm steel-tube or molded plywood support frame with upholstered foam stack | |
| Five-star base | Polished aluminum-alloy or chrome-plated steel five-star base with five radial legs | |
| Base leg material thickness | 2.5 mm metal wall or die-cast equivalent section | |
| Gas lift | Chrome-plated telescoping steel gas lift with black lower actuator | |
| Tilt mechanism | Black steel tilt mechanism with side lever and central chassis beneath the seat | |
| Casters | Black and polished twin-wheel swivel casters, five total, with metal mounting stems | |
| Fasteners and fittings | Steel bolts, arm brackets, and mechanism mounting plates with black or zinc finish |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seat height adjustment | Pneumatic lift with 100 mm vertical stroke controlled by the visible side lever | |
|---|---|---|
| Back recline movement | Synchro-tilt back recline with 15-degree rearward angle and synchronized seat movement | |
| Tilt lock control | Multi-position lock engaged through the under-seat lever to hold selected recline angles | |
| Tilt tension adjustment | Knob-operated tension control calibrated for users up to 160 kg | |
| Fixed padded armrests | Structured arm supports provide 240 mm above-seat forearm support without height or pivot adjustment | |
| Caster mobility | Five 60 mm twin-wheel casters provide omnidirectional movement on hard floors and low-pile carpet | |
| Lumbar support | Horizontal seam and padded lower-back zone provide passive lumbar contouring | |
| Stability system | 700 mm five-star base with twin-wheel contact points resists tipping during normal recline | |
| Occupancy and movement limit | Designed for one seated user at a time and indoor office use on level floors | |
| Back recline clearance | 150 mm rearward travel at the upper back | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office | Suits managers and senior staff because the high back, fixed padded arms, and ivory finish provide a formal executive appearance | |
|---|---|---|
| Management workstation | Pairs with 720 to 760 mm high executive desks for daily computer, meeting, and paperwork tasks | |
| Private meeting room | Provides one-person swivel seating for consultations and short collaborative discussions | |
| Reception or boardroom setting | Fits formal visitor or leadership seating areas where a tailored upholstered look is preferred | |
| Commercial office interior | Recommended for indoor, level-floor environments with hard floors or low-pile carpet | |
| Procurement configuration option | Order seat upholstery, arm panel color, hard-floor or soft-floor casters, and mechanism grade against project standards | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1 office furniture dimensions | Use the standard's office-chair dimensional measurement basis for seat, back, and clearance verification | |
|---|---|---|
| EN 1335-2 office chair safety | Require structural safety, stability, and caster strength verification for production lot acceptance | |
| EN 1335-3 office chair test methods | Use specified static, fatigue, and impact test methods to validate structural durability |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 caster test section | Require 100,000-cycle caster durability and floor-safe wheel material verification |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.3 furniture mechanical test | Apply seat and back strength/durability test methods for office chairs during procurement inspection | |
|---|---|---|
| GB/T 3324 general technical furniture requirements | Use dimensional, material, and workmanship acceptance requirements for wooden and upholstered furniture components | |
| GB 17927 furniture upholstery safety | Specify degradation-resistant cushioning and upholstered furniture fire-safety review where contractually required |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.3 furniture mechanical test: Apply seat and back strength/durability test methods for office chairs during procurement inspection; 2. GB/T 3324 general technical furniture requirements: Use dimensional, material, and workmanship acceptance requirements for wooden and upholstered furniture components; 3. GB 17927 furniture upholstery safety: Specify degradation-resistant cushioning and upholstered furniture fire-safety review where contractually required; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool