Product supplierArmless Swivel Conference Chair with Wood Shell and Upholstered Pads, Curved laminated bentwood with walnut-tone veneer, 12 mm nominal shell thickness
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 660 × 920 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 15 kg | |
|---|---|---|
| Recommended user weight capacity | 136 kg | |
| Back support static test reference | 136 kg | |
| Seat impact durability reference | 100000 cycles | |
| Caster rolling durability reference | 100000 cycles | |
| Gas-lift vertical travel | 100 mm | |
| Back tilt travel | 12 degrees | |
| Recommended daily occupancy | 6 hours | |
| Color count | 2 visible finishes | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer seat and back shell | Curved laminated bentwood with walnut-tone veneer, 12 mm nominal shell thickness | |
|---|---|---|
| Seat facing | Light beige polyurethane leather over shaped foam, 1.0 mm nominal facing thickness | |
| Back facing | Light beige polyurethane leather padding with vertical seam panels | |
| Seat foam | Molded polyurethane foam, 60 mm thick and 45 kg/m3 reference density | |
| Back foam | Molded polyurethane padding, 50 mm thick and 40 kg/m3 reference density | |
| Internal seat support | 12 mm bentwood panel bonded to the outer shell and mechanism plate | |
| Five-star base | Polished or brushed die-cast aluminum-appearing metal base with five spokes | |
| Base spoke wall section | 25 x 4 mm nominal metal section | |
| Gas lift | Black-and-chrome steel pneumatic cylinder with 50 mm outer tube | |
| Tilt mechanism | Black powder-coated steel plate mechanism with side operating lever | |
| Casters | Five black nylon twin-wheel casters with 50 mm wheels and metal grip stems | |
| Edge and seam construction | Upholstered pads are bordered by the molded wood shell, with 80 mm reference seam pitch |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| 360-degree swivel | Seat rotates fully around the central gas-lift axis for conference-room entry and exit | |
|---|---|---|
| Pneumatic seat-height adjustment | Side lever controls a 100 mm gas-lift stroke, giving a 470 mm maximum seat height | |
| Back tilt operation | Synchro-style visible tilt plate provides a 12-degree backward recline with upright working position | |
| Tilt lock | Single lever allows upright lock and release for controlled recline during meetings | |
| Mobility | Five twin-wheel casters allow 360-degree rolling on hard floors and low-pile carpet | |
| Integrated side body support | Curved wood side wraps the seat and back without adding protruding armrests | |
| Armless access | No armrests are present, allowing close approach to tables and compact side access | |
| Upholstered pressure distribution | Separate padded seat and back panels provide cushioning over the rigid curved shell | |
| Floor-protection design | Soft black twin wheels are specified as a 50 mm non-marking procurement option | |
| Replacement and maintenance | Shell-mounted pads and standard 50 mm caster stems allow upholstery and wheel replacement | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Conference room | Use around boardroom or meeting tables where armless chairs can tuck close and swivel for discussion | |
|---|---|---|
| Executive office | Place across from a desk as visitor seating or as a refined mobile task chair | |
| Private home office | Suitable for desks or laptop work in interiors using walnut, beige, black, or polished metal finishes | |
| Collaboration area | Deploy in small meeting pods where users need quick repositioning without armrest interference | |
| Hotel meeting suite | Specify for conference suites and guest business lounges requiring lightweight visual design and easy movement | |
| Reception consultation setting | Use for brief consultations in reception or showroom areas rather than all-day call-center seating | |
| Recommended table height | Pair with 760 mm conference or work surfaces based on the 470 mm maximum seat height | |
| Floor compatibility | Use on hard wood, tile, sealed concrete, or low-pile carpet with the specified 50 mm twin casters |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Office furniture safety standard | EN 1335applicable to dimensional, safety, and strength requirements for office swivel chairs | |
|---|---|---|
| Office chair mechanical durability | EN 1335applicable to safety, static load, fatigue, and caster durability verification | |
| Office chair dimensional ergonomics | EN 1335applicable to seat height, seat depth, clearance, and back dimensional checks |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| Office chair safety and durability | Recommended references: ANSI/BIFMA X5.1 | |
|---|---|---|
| Office chair base and caster loading | ANSI/BIFMA X5.1 base-load, caster, and chair-cycle tests are relevant to the five-star base and wheels | |
| Low-emission furniture procurement | ANSI/BIFMA e3 may be specified for multi-attribute sustainability and material-emission criteria |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Office-chair safety standard | GB/T 28002.1 applicable to safety, stability, durability, and static loading of an office swivel chair | |
|---|---|---|
| Furniture leather or polyurethane-leather check | GB/T 16799 applicable when specifying furniture-use synthetic leather facing performance | |
| Wood-based panel environmental control | GB 18580 applicable to formaldehyde emission from any engineered wood in the laminated shell | |
| Furniture mechanical test reference | GB/T 10357.3 applicable to chair strength and durability acceptance tests |
Standardized tender description text
This product must meet the following technical requirements: 1. Office-chair safety standard: GB/T 28002.1 applicable to safety, stability, durability, and static loading of an office swivel chair; 2. Furniture leather or polyurethane-leather check: GB/T 16799 applicable when specifying furniture-use synthetic leather facing performance; 3. Wood-based panel environmental control: GB 18580 applicable to formaldehyde emission from any engineered wood in the laminated shell; 4. Furniture mechanical test reference: GB/T 10357.3 applicable to chair strength and durability acceptance tests; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool