纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 660 × 920 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	15 kg
Recommended user weight capacity	136 kg
Back support static test reference	136 kg
Seat impact durability reference	100000 cycles
Caster rolling durability reference	100000 cycles
Gas-lift vertical travel	100 mm
Back tilt travel	12 degrees
Recommended daily occupancy	6 hours
Color count	2 visible finishes
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer seat and back shell	Curved laminated bentwood with walnut-tone veneer, 12 mm nominal shell thickness
Seat facing	Light beige polyurethane leather over shaped foam, 1.0 mm nominal facing thickness
Back facing	Light beige polyurethane leather padding with vertical seam panels
Seat foam	Molded polyurethane foam, 60 mm thick and 45 kg/m3 reference density
Back foam	Molded polyurethane padding, 50 mm thick and 40 kg/m3 reference density
Internal seat support	12 mm bentwood panel bonded to the outer shell and mechanism plate
Five-star base	Polished or brushed die-cast aluminum-appearing metal base with five spokes
Base spoke wall section	25 x 4 mm nominal metal section
Gas lift	Black-and-chrome steel pneumatic cylinder with 50 mm outer tube
Tilt mechanism	Black powder-coated steel plate mechanism with side operating lever
Casters	Five black nylon twin-wheel casters with 50 mm wheels and metal grip stems
Edge and seam construction	Upholstered pads are bordered by the molded wood shell, with 80 mm reference seam pitch

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Seat rotates fully around the central gas-lift axis for conference-room entry and exit
Pneumatic seat-height adjustment	Side lever controls a 100 mm gas-lift stroke, giving a 470 mm maximum seat height
Back tilt operation	Synchro-style visible tilt plate provides a 12-degree backward recline with upright working position
Tilt lock	Single lever allows upright lock and release for controlled recline during meetings
Mobility	Five twin-wheel casters allow 360-degree rolling on hard floors and low-pile carpet
Integrated side body support	Curved wood side wraps the seat and back without adding protruding armrests
Armless access	No armrests are present, allowing close approach to tables and compact side access
Upholstered pressure distribution	Separate padded seat and back panels provide cushioning over the rigid curved shell
Floor-protection design	Soft black twin wheels are specified as a 50 mm non-marking procurement option
Replacement and maintenance	Shell-mounted pads and standard 50 mm caster stems allow upholstery and wheel replacement
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room	Use around boardroom or meeting tables where armless chairs can tuck close and swivel for discussion
Executive office	Place across from a desk as visitor seating or as a refined mobile task chair
Private home office	Suitable for desks or laptop work in interiors using walnut, beige, black, or polished metal finishes
Collaboration area	Deploy in small meeting pods where users need quick repositioning without armrest interference
Hotel meeting suite	Specify for conference suites and guest business lounges requiring lightweight visual design and easy movement
Reception consultation setting	Use for brief consultations in reception or showroom areas rather than all-day call-center seating
Recommended table height	Pair with 760 mm conference or work surfaces based on the 470 mm maximum seat height
Floor compatibility	Use on hard wood, tile, sealed concrete, or low-pile carpet with the specified 50 mm twin casters

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office furniture safety standard	EN 1335applicable to dimensional, safety, and strength requirements for office swivel chairs
Office chair mechanical durability	EN 1335applicable to safety, static load, fatigue, and caster durability verification
Office chair dimensional ergonomics	EN 1335applicable to seat height, seat depth, clearance, and back dimensional checks

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office chair safety and durability	Recommended references: ANSI/BIFMA X5.1
Office chair base and caster loading	ANSI/BIFMA X5.1 base-load, caster, and chair-cycle tests are relevant to the five-star base and wheels
Low-emission furniture procurement	ANSI/BIFMA e3 may be specified for multi-attribute sustainability and material-emission criteria

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Office-chair safety standard	GB/T 28002.1 applicable to safety, stability, durability, and static loading of an office swivel chair
Furniture leather or polyurethane-leather check	GB/T 16799 applicable when specifying furniture-use synthetic leather facing performance
Wood-based panel environmental control	GB 18580 applicable to formaldehyde emission from any engineered wood in the laminated shell
Furniture mechanical test reference	GB/T 10357.3 applicable to chair strength and durability acceptance tests

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Office-chair safety standard：GB/T 28002.1 applicable to safety, stability, durability, and static loading of an office swivel chair；
2. Furniture leather or polyurethane-leather check：GB/T 16799 applicable when specifying furniture-use synthetic leather facing performance；
3. Wood-based panel environmental control：GB 18580 applicable to formaldehyde emission from any engineered wood in the laminated shell；
4. Furniture mechanical test reference：GB/T 10357.3 applicable to chair strength and durability acceptance tests；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MBW-SWIVEL-620

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MBW-SWIVEL-620

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MBW-SWIVEL-620打开导出工具

页面快速操作

发布采购询价

产品描述

The Armless Swivel Conference Chair with Wood Shell and Upholstered Pads, model MBW-SWIVEL-620, presents a refined mid-back silhouette defined by a continuous curved bentwood shell in a walnut-tone veneer. Light beige polyurethane-leather seat and back pads soften the wood form, with vertical seam panels on the backrest adding tailored visual structure. The armless profile keeps the design open and compact, while curved side contours provide integrated body support without protruding armrests. A polished or brushed five-star base in a die-cast aluminum appearance supports the chair beneath the seat, paired with a black-and-chrome gas lift and visible tilt hardware. Overall dimensions are 620 by 660 by 920 millimeters, with a clear width between armrest positions of 540 millimeters. Construction combines a laminated bentwood outer shell, a bonded internal bentwood seat panel, steel lifting and tilt components, foam cushioning, and upholstered facings. The shell has a nominal thickness of 12 millimeters, and the base spokes use a nominal 25 by 4 millimeter metal wall section. The seat uses molded polyurethane foam 60 millimeters thick with a 45 kg/m3 reference density, topped by 1.0 millimeter nominal light beige polyurethane leather. Total finished cushion thickness is 90 millimeters. The back uses molded polyurethane padding 50 millimeters thick with a 40 kg/m3 reference density, producing 70 millimeters of finished back padding and a 240 millimeter lumbar support zone. Functionally, the chair swivels 360 degrees for easy entry, exit, and conversation in meeting settings. A side lever controls the 100 millimeter gas-lift stroke, providing a maximum seat height of 470 millimeters. The synchro-style visible tilt plate enables a 12-degree backward recline and an upright working position, with a single lever for locking upright or releasing controlled movement. Five nylon twin-wheel casters provide multidirectional rolling on hard floors and low-pile carpet. The chair has a net weight of 15 kilograms and a recommended user weight capacity of 136 kilograms; reference durability figures include 100,000 cycles for seat impact and caster rolling. This chair is well suited to boardrooms, meeting tables, executive offices, private home offices, collaboration pods, hotel meeting suites, and reception or showroom consultation areas. Its armless form allows users to tuck close to tables and move in compact layouts. It is intended for meeting and consultation use rather than continuous call-center seating. Procurement teams should note that this unbranded model ships as one set in two cartons, with packaged gross weight of 23 kilograms and a reference carton volume of 0.26 cubic meters per set. Indicative loading is 135 sets in a 20GP container at 85 percent space utilization, and assembly time is referenced at 40 minutes per set. Finish coordination is straightforward in interiors using walnut, beige, black, or polished metal tones.

Armless Swivel Conference Chair with Wood Shell and Upholstered Pads Specifications

供应商与现货