Product supplierFixed Cantilever Mesh Back Conference Office Chair, Breathable polyester woven mesh, black color
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 600 × 1000 mm | |
|---|---|---|
| Seat height (floor to seat top) | 450 mm | |
| Seat width (usable surface) | 480 mm | |
| Seat depth (usable surface) | 460 mm | |
| Total backrest height (seat top to back top) | 530 mm | |
| Backrest lumbar support zone width | 380 mm | |
| Armrest height (floor to arm top) | 660 mm | |
| Armrest top surface dimensions | 90 x 250 mm | |
| Cantilever leg footprint width | 520 mm | |
| Seat pad thickness | 60 mm | |
| Seat width (usable surface between armrests) | 480 mm | |
| Seat depth (usable front-to-back surface) | 460 mm | |
| Lower lumbar mesh panel height | 180 mm | |
| Upper back mesh panel height | 300 mm | |
| Armrest top surface dimensions (W x L) | 90 x 250 mm | |
| Cantilever sled leg footprint (front-to-back depth) | 520 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight range | 13kg | |
|---|---|---|
| Static load capacity (seat) | 136 kg (300 lbs) | |
| Recommended user weight limit | 110 kg | |
| Frame static load test reference | 100,000 cyclic load cycles | |
| Floor glide contact load rating | 300 kg per glide total distributed | |
| Recommended maximum user weight | 110 kg | |
| Frame cyclic load durability | 100,000 load cycles of 102kg | |
| Per-glide static load rating | 300 kg total distributed load | |
| Seat foam indentation load deflection (ILD) | 45 ILD | |
| Mesh fabric tensile strength | ≥200 N/5cm |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest mesh fabric | Breathable polyester woven mesh, black color | |
|---|---|---|
| Backrest support frame | Injection-molded black PP structural frame, lumbar support contoured design | |
| Seat upholstery | Black woven fabric surface over foam padding | |
| Seat foam core | High resilience polyurethane foam, density 45kg/m³, 60mm thickness | |
| Fixed armrest assembly | Black molded PP arm pads with integrated steel support posts connected to seat frame | |
| Cantilever base frame | 16mm diameter powder-coated black steel tube, wall thickness 1.5mm | |
| Floor contact glides | Injection-molded black PP non-marring glides, 20mm square | |
| Seat inner support | 12mm thick molded plywood seat pan | |
| Backrest structural frame | Injection-molded black polypropylene (PP) perimeter frame with integrated contoured lumbar support curve | |
| Seat upholstery fabric | Black woven polyester fabric surface, matte finish, abrasion resistance ≥30,000 Martindale cycles (commercial grade reference) | |
| Cantilever sled base frame | 19mm diameter powder-coated matte black steel tube, wall thickness 1.5mm | |
| Seat inner support pan | 12mm thick molded multi-ply birch plywood, attached to frame with 4 sets of M6 steel bolts |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating motion | Fixed cantilever design with controlled flexible flex under load, no swivel or tilt mechanism | |
|---|---|---|
| Back support | Contoured dual-zone mesh back with built-in lumbar curve to support lower back during extended sitting | |
| Arm support | Fixed height armrests positioned to support forearms at standard desk height, no height or width adjustment | |
| Floor compatibility | Hard plastic glides suitable for carpet, tile, and hardwood floors, no rolling casters | |
| Ventilation function | Full mesh back panel allows air circulation to reduce back heat buildup during long meetings | |
| Stackability | Non-stackable design due to curved cantilever frame shape | |
| Base motion | Fixed cantilever sled design with 8° controlled flexible deflection under seated load, no swivel, no tilt mechanism, no casters | |
| Back ventilation | Full open-weave mesh across upper and lower back panels allows unobstructed air circulation to reduce back heat and moisture buildup during long meetings | |
| Seat comfort | 45kg/m³ high resilience foam seat distributes ischial pressure evenly, retains 90%+ of original thickness after 10,000 compression cycles | |
| Stacking capability | Non-stackable design due to curved sled leg geometry and fixed armrest protrusions, requires individual floor placement | |
| Assembly requirement | Shipped 95% assembled, only requires attachment of 4 glide pieces if removed for shipping, no tools required | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Packaged carton count | 1 unit per carton | |
|---|---|---|
| Reference carton dimensions | 650 x 630 x 540 mm | |
| Reference packed gross weight | 15kg | |
| Reference carton CBM | 0.22 CBM per unit | |
| 20ft GP container loading quantity | 280 units | |
| 40ft HQ container loading quantity | 660 units | |
| Reference carton dimensions (L x W x H) | 650 x 630 x 540 mm | |
| Reference carton volume | 0.22 CBM per unit | |
| Estimated assembly time per unit | 3minutes | |
| 20ft GP container loading quantity (loose loaded) | 280 units |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Corporate conference room seating | Fixed stable sled base design eliminates unwanted rolling during meetings, black neutral finish matches all standard office conference table designs, suitable for 4 hour meeting use | |
|---|---|---|
| Visitor/reception seating | Durable easy-clean design suitable for front office reception and guest waiting areas | |
| Open office workstation guest seating | Fixed position design suitable for placement beside workstations for ad-hoc collaborative discussions | |
| Training room seating | Lightweight durable construction suitable for high-traffic training and seminar spaces | |
| Front office visitor/reception seating | Durable easy-to-clean fabric and mesh construction suitable for high-traffic guest waiting areas, compact 600mm depth does not obstruct reception walkways | |
| Corporate training room seating | Low-maintenance design with no moving adjustment parts reduces breakdown risk in high-turnover training and seminar spaces, lightweight 13kg weight allows easy repositioning by staff | |
| Public area waiting seating | Sturdy steel frame construction supports heavy daily use in government hall, bank or medical clinic waiting areas, breathable mesh back maintains comfort for extended waiting periods | |
| Recommended Matching Desk Size | 2.4m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-2 | 2018: Office furniture - Office work chairs - Part 2: Safety requirements | |
|---|---|---|
| EN 1335-3 | 2018: Office furniture - Office work chairs - Part 3: Test methods | |
| EN 1022 | 2018: Domestic furniture - Seating - Determination of stability |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | General Purpose Office Chairs - Tests |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3326-2016 | Furniture - Determination of dimensions for desks and chairs | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
| GB/T 24821-2009 | Office furniture - Office chairs | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3326-2016: Furniture - Determination of dimensions for desks and chairs; 2. GB/T 3324-2017: General technical requirements for wooden furniture; 3. GB/T 24821-2009: Office furniture - Office chairs; 4. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool