Product supplierBlack Mesh Back Cantilever Conference Office Chair with Fixed Armrests, Black breathable polyester mesh
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 610 × 970 mm | |
|---|---|---|
| Seat height from floor to top of seat cushion | 450 mm | |
| Seat cushion usable width | 490 mm | |
| Seat cushion usable depth | 450 mm | |
| Seat cushion thickness | 60 mm | |
| Backrest height from seat surface to top of back | 510 mm | |
| Backrest width at widest point | 480 mm | |
| Armrest height from seat surface to armrest pad top | 200 mm | |
| Armrest pad dimensions (L x W) | 250 x 80 mm | |
| Sled base footprint width (front to rear leg span) | 580 mm | |
| Floor glide contact pad size | 40 x 40 mm | |
| Sled base front-to-rear leg span | 580 mm | |
| Sled base cross-connecting bar height from floor | 120 mm | |
| Knee clearance under seat front edge | 180 mm | |
| Finished Seat Cushion Thickness | 90mm | |
| Backrest Padding Thickness | 70mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight range | 14kg | |
|---|---|---|
| Static seat load rating | 110 kg | |
| Backrest static load resistance | 68 kg | |
| Recommended maximum user weight | 110 kg | |
| Lumbar support zone height above seat | 280mm | |
| Seat foam density | 45kg/m³ | |
| Frame durability cycle rating (forward/rearward tilt) | 100,000 cycles | |
| Floor glide abrasion resistance | ≥5000 cycles without floor damage | |
| Frame durability cycle rating (forward/rearward load) | 100,000 cycles | |
| Anti-tip stability (forward/rearward/side) | Passes 60kg offset load test without tipping |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest upholstery | Black breathable polyester mesh | |
|---|---|---|
| Backrest internal support structure | Black molded PP (polypropylene) lumbar support frame | |
| Seat cushion upholstery | Black woven fabric or breathable mesh | |
| Seat cushion core | High resilience molded polyurethane foam | |
| Seat support pan | 1.8mm thick stamped steel plate | |
| Armrest support posts | 2.0mm thick powder-coated steel tubing | |
| Armrest pads | Injection-molded soft-touch PP (polypropylene) | |
| Cantilever leg frame | 22mm diameter 2.0mm thick round steel tubing, matte black powder-coated finish | |
| Foot glides | Injection-molded non-marking PP with anti-slip TPE base | |
| Frame finish | Epoxy polyester powder coating, matte black | |
| Frame weld joints | Full penetration MIG welded joints ground smooth before coating | |
| Frame coating | 80μm thick epoxy polyester powder coating, matte black, salt spray resistance ≥48 hours |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating position | Fixed upright posture with no tilt or recline mechanism | |
|---|---|---|
| Armrest function | Fixed height, fixed position armrests with no height, width or pivot adjustment | |
| Back support function | Contoured ergonomic lumbar support integrated into mesh back frame | |
| Mobility | No casters, sled base design with floor glides | |
| Stackability | Non-stackable frame design | |
| Seat cushion performance | Fixed contoured foam cushion with rounded waterfall front edge | |
| Backrest ventilation | Full mesh back construction allows continuous air flow | |
| Seating posture | Fixed upright 95° torso-to-seat angle with no tilt or recline mechanism | |
| Seat cushion ergonomics | Fixed contoured foam cushion with 20mm radius rounded waterfall front edge | |
| Armrest load capacity | Supports 40kg vertical static load per armrest without permanent deformation | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40minutes per set | |
| Reference Carton Dimensions | 850 × 420 × 720mm | |
| Reference Packaged Gross Weight | 23kg/set | |
| Reference Carton Volume | 0.26m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary application | Corporate conference and meeting rooms | |
|---|---|---|
| Secondary application | Visitor and guest seating in reception areas | |
| Tertiary application | Training room and open office workstation supplementary seating | |
| Suitable floor types | Hard floors including tile, wood, laminate and low-pile carpet | |
| Recommended table compatibility | Standard 760mm height office desks and conference tables | |
| User group | Adult office users up to 110kg body weight | |
| Recommended layout density | 600mm center-to-center spacing per chair around conference tables | |
| Recommended Matching Desk Size | 2.4m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1:2020 | Office furniture - Office work chair - Part 1: Dimensions - Safety requirements | |
|---|---|---|
| EN 1335-2:2018 | Office furniture - Office work chair - Part 2: Safety requirements | |
| EN 1335-3:2018 | Office furniture - Office work chair - Part 3: Test methods |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | Office Chairs - General Purpose |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3326-2016 | Furniture - Chairs and stools - Determination of dimensions of seats | |
|---|---|---|
| GB/T 10357.2-2013 | Test of mechanical properties of furniture - Strength and durability of chair backrests | |
| GB/T 10357.3-2013 | Test of mechanical properties of furniture - Strength and durability of chair seats | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | |
| GB/T 10357.7-2013 | Test of mechanical properties of furniture - Stability of chairs and stools |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3326-2016: Furniture - Chairs and stools - Determination of dimensions of seats; 2. GB/T 10357.2-2013: Test of mechanical properties of furniture - Strength and durability of chair backrests; 3. GB/T 10357.3-2013: Test of mechanical properties of furniture - Strength and durability of chair seats; 4. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture; 5. GB/T 10357.7-2013: Test of mechanical properties of furniture - Stability of chairs and stools; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool