Product supplierDual-Back Mesh Cantilever Conference Office Chair, Black breathable warp-knitted polyester mesh, tensioned over PP back frames
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 650 × 1040 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat usable dimensions (W×D) | 490 × 470 mm | |
| Seat cushion thickness | 60 mm | |
| Total backrest height | 580 mm | |
| Upper backrest section (W×H) | 480 × 280 mm | |
| Lower backrest section (W×H) | 480 × 200 mm | |
| Armrest height above seat surface | 210 mm | |
| Cantilever sled base footprint (W×D) | 570 × 540 mm | |
| Integrated lumbar pad thickness | 30 mm | |
| Under-seat knee clearance height | ≥180 mm | |
| Finished Seat Cushion Thickness | 90mm | |
| Backrest Padding Thickness | 70mm | |
| Lumbar Support Zone Height | 240mm | |
| Clear Width Between Armrests | 540mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight range | 14kg | |
|---|---|---|
| Recommended static seat load capacity | 136 kg (300 lbs) | |
| Seat cushion foam density | 45kg/m³ high resilience molded foam | |
| Back mesh fabric tensile strength | ≥350 N warp/weft | |
| Cantilever frame static bending load rating | ≥1500 N vertical load without permanent deformation | |
| Recommended product service life | 8 years under standard 8-hour daily office use | |
| Seam stitch strength | ≥70 N per stitch | |
| Floor glide abrasion resistance | ≥2000 cycles of repositioning on hard tile/wood floors without scratch damage | |
| Seat Foam Density / Rebound Reference | 45kg/m³ / 65% | |
| Back Foam Density Reference | 38kg/m³ |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest upholstery | Black breathable warp-knitted polyester mesh, tensioned over PP back frames | |
|---|---|---|
| Integrated lumbar support | Contoured padded PP core with fabric wrap, fixed position on lower back | |
| Seat cushion core | High-resilience molded polyurethane foam, contoured waterfall front edge | |
| Seat underside pan | Black reinforced polypropylene structural shell | |
| Armrests | Fixed T-shaped rigid polypropylene armrests, matte black finish, mounted to seat frame | |
| Support frame | 16mm diameter 1.5mm wall thickness black powder-coated steel tubular cantilever sled base | |
| Floor glides | Injection-molded nylon anti-scratch glides, press-fit to base tube ends | |
| Back support brackets | Reinforced PP connection brackets linking dual back sections to seat frame | |
| Upper backrest upholstery | Black breathable warp-knitted polyester mesh, 3mm thickness, tension-mounted over rigid PP back frame with uniform tautness | |
| Lower backrest upholstery | Black breathable warp-knitted polyester mesh, matched to upper back weave, mounted on PP lower frame with integrated lumbar protrusion | |
| Seat upholstery face | 0.8mm thick matte black polyurethane or breathable woven fabric laminate over foam, uniform stitching at edges | |
| Hardware fasteners | Grade 4.8 black zinc-plated steel bolts and nuts, rust-resistant coating for indoor office use |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating structure | Fixed cantilever sled base, no swivel, no tilt, no height adjustment | |
|---|---|---|
| Back support design | Dual-section independent mesh back with fixed integrated lumbar pad, supports natural spine S-curve without manual adjustment | |
| Armrest function | Fixed position armrests, provide stable forearm support during meetings and desk work, no height/pivot/width adjustment | |
| Seat ergonomics | Waterfall contoured seat front edge, reduces pressure on back of thighs during extended seated periods | |
| Floor protection | Smooth nylon glides enable gentle repositioning on hard floors without scratching, no casters installed | |
| Frame flex design | Cantilever frame provides controlled 5 degrees of passive flex when leaning back for improved comfort without mechanical tilt components | |
| Seating mobility structure | Fixed cantilever sled base with no swivel, no tilt mechanism, no gas lift height adjustment, designed for static conference/guest seating | |
| Armrest support function | Fixed-position T-armrests, provide 210mm forearm support height above seat for meetings and short-duration desk work, no height/pivot/width/ depth adjustment | |
| Seat ergonomic function | Waterfall contoured seat front edge, reduces 20% of pressure on posterior thigh tissues during seated periods up to 4 hours | |
| Floor protection function | Smooth nylon glides allow low-force repositioning (≤15N push force) on hard wood, tile and low-pile carpet floors without scratching, no casters fitted | |
| Frame flex comfort function | Tubular steel cantilever frame provides controlled 5 degrees of passive rear flex when user leans back, delivers dynamic comfort without mechanical tilt components | |
| Ventilation function | Tensioned mesh back panels allow 30%+ air permeability through the backrest, reduces heat buildup during extended seated meetings |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40minutes per set | |
| Reference Carton Dimensions | 850 × 420 × 720mm | |
| Reference Packaged Gross Weight | 23kg/set | |
| Reference Carton Volume | 0.26m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Corporate conference rooms | Cantilever sled design allows easy push-in under 760mm conference tables, breathable mesh back supports occupants during meetings up to 4 hours, fixed base prevents disruptive swiveling | |
|---|---|---|
| Open office guest seating | Compact footprint and professional black finish suit visitor seating at workstations or reception areas | |
| Training room seating | Fixed non-swivel base reduces distraction during training sessions, durable frame withstands frequent repositioning | |
| Home office secondary seating | Neutral black aesthetic and ergonomic support suit temporary or daily home office use without requiring task chair adjustment features | |
| Recommended pairing surfaces | Compatible with standard 760mm height office desks and conference tables, armrest height fits under most standard table aprons | |
| Open office visitor/guest seating | Compact 620mm width footprint and matte black professional finish suit visitor seating placed adjacent to employee workstations or reception lounge areas | |
| Corporate training room seating | Fixed non-swivel base reduces attendee distraction during training sessions, durable welded steel frame withstands frequent repositioning between sessions | |
| Reception and waiting areas | Curved dual-back ergonomic design provides comfortable support for waiting visitors, non-marking glides protect polished lobby floors |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-2:2018 | European standard for office work chairs: safety requirements, applicable reference for structural stability and load testing for contract office use | |
|---|---|---|
| EN 1335-3:2018 | European standard for office work chairs: test methods, applicable reference to verify structural durability and safety performance | |
| EN 1022:2018 | European standard for domestic and contract seating: determination of stability, applicable reference to verify anti-tipping performance of the cantilever sled base |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.1 General-Purpose Office Chairs |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3326-2016 | Recommended standard for office furniture: desk, chair and stool dimensions, applicable to verify seat height, depth and back size compliance for general office use | |
|---|---|---|
| GB/T 35607-2017 | Recommended national standard for green product evaluation of furniture, applicable for formaldehyde and harmful substance limits of foam and fabric components | |
| GB 28007-2011 | National standard for general technical requirements for children's furniture does NOT apply to this commercial office seating product | |
| GB/T 10357.3-2013 | National standard for furniture mechanical property testing: strength and durability of chairs and stools, applicable reference for static load, impact and fatigue testing of frame and seat structure |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3326-2016: Recommended standard for office furniture: desk, chair and stool dimensions, applicable to verify seat height, depth and back size compliance for general office use; 2. GB/T 35607-2017: Recommended national standard for green product evaluation of furniture, applicable for formaldehyde and harmful substance limits of foam and fabric components; 3. GB 28007-2011: National standard for general technical requirements for children's furniture does NOT apply to this commercial office seating product; 4. GB/T 10357.3-2013: National standard for furniture mechanical property testing: strength and durability of chairs and stools, applicable reference for static load, impact and fatigue testing of frame and seat structure; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool