| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall bed footprint | 1980 x 2220 x 1200 mm | |
|---|---|---|
| Compatible mattress size | 1800 x 2000 mm | |
| Headboard width | 1980 mm | |
| Headboard height | 1200 mm | |
| Headboard cushion thickness | 180 mm | |
| Side rail length | 2100 mm | |
| Side rail height above floor | 320 mm | |
| Side rail panel thickness | 35 mm | |
| Footboard height above floor | 320 mm | |
| Slat support height above floor | 280 mm | |
| Under-bed clearance | 150 mm | |
| Mattress support surface | 1800 x 2000 mm | |
| Recommended mattress thickness | 406 mm | |
| Nightstand clearance each side | 500 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static bed load capacity | 363 kg | |
|---|---|---|
| Recommended user capacity | 2 adults | |
| Product net weight | 85.1 kg | |
| Slat count | 16 slats | |
| Slat spacing | 80 mm | |
| Center support legs | 3 legs | |
| Slat individual static load | 45 kg per slat | |
| Rail connection hardware | 8 bolt assemblies | |
| Suggested upholstery abrasion acceptance | 30000 Martindale cycles | |
| Seam strength acceptance | 90 N |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Beige smooth woven fabric or faux leather with tailored edge stitching | |
|---|---|---|
| Headboard padding | Polyurethane foam over rigid backing, forming two padded upper and lower panels | |
| Side and foot rail padding | Foam-padded upholstered rails over a structural frame | |
| Internal bed frame | Kiln-dried timber or engineered wood perimeter frame with metal corner brackets | |
| Slat system | 16-piece wood or LVL bent slat support without a box spring | |
| Center support structure | Steel or wood center beam with three floor-contact support legs | |
| Base feet | Low-profile protective plastic or metal feet with floor-contact pads | |
| Nightstand exterior | Matching beige upholstered or wrapped panels with rounded corners and two drawer fronts | |
| Nightstand handle hardware | Two horizontal dark pull handles per cabinet, one for each drawer | |
| Stitching detail | Fine tonal edge and panel seams with 80 mm seam pitch target | |
| Under-bed hardware | Black powder-coated steel support plates and bolts | |
| Slat Thickness | 15 mm bent plywood or solid timber |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Platform support | Integrated slat deck supports the mattress directly and removes the need for a box spring | |
|---|---|---|
| Headboard configuration | Two-column split padded headboard provides separate left and right back cushions | |
| Bed entry | Three-sided low rail design allows entry from the foot or either exposed side | |
| Mattress retention | Upholstered side and foot rails form a shallow perimeter ledge to reduce mattress shift | |
| Under-bed access | 150 mm open floor gap permits cleaning access but does not provide lift storage | |
| Knockdown assembly | Bolted headboard, side rails, foot rail, center beam and slats assemble on site | |
| Nightstand function | Each matching bedside cabinet provides two horizontal drawers for bedside storage | |
| Stability anchoring | Headboard secures to both side rails and should be placed against a wall for lateral stability | |
| Slat replacement | Individual slats can be removed or replaced without lifting the complete upholstered frame | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Total carton volume | 0.632 CBM | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Master bedroom | Suits a King-size residential bedroom with nightstands on both sides and a wall-mounted headboard | |
|---|---|---|
| Modern apartment interior | Beige low-profile form coordinates with stone-look flooring and neutral wall finishes | |
| Hotel guest room | Padded headboard and quiet neutral cover fit long-stay or upscale hotel room specifications | |
| Showroom display | Pairs naturally with a matching sofa, ambient wall lighting and upholstered nightstands in a lifestyle suite | |
| Residential upgrade project | Suitable for buyers replacing a traditional bed with a lower, upholstered slat-platform system | |
| Two-adult sleeping layout | 1800 mm mattress support provides independent pillow space and shared sleeping width |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Home furniture beds safety, strength and durability requirements for frame and slat-system validation | |
|---|---|---|
| EN 12521:2015 | Furniture strength, durability and safety requirements for indoor domestic bedding | |
| EN 1021-1:2014 | Upholstered furniture ignitability by smouldering cigarette, relevant to fabric and foam fire performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to the hidden wood frame and slat base | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture technical requirements, applicable if steel center beams or support plates are used | |
| GB 18584-2001 | Indoor decorative material limit for formaldehyde emission on wood-based furniture components | |
| GB/T 10357.6-2013 | Furniture mechanical test for beds, suitable for static load and stability acceptance testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to the hidden wood frame and slat base; 2. GB/T 3325-2017: Metal furniture technical requirements, applicable if steel center beams or support plates are used; 3. GB 18584-2001: Indoor decorative material limit for formaldehyde emission on wood-based furniture components; 4. GB/T 10357.6-2013: Furniture mechanical test for beds, suitable for static load and stability acceptance testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
