Product supplierUpholstered Soft Bed with Pillow-Top Headboard, Light beige woven fabric or leather-look material with visible sewn seams
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1980 x 2250 x 1180 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight reference | 72 kg | |
|---|---|---|
| Recommended total static load | 350 kg | |
| Mattress weight allowance | 60 kg | |
| Sleeping capacity | 2 adults | |
| Slat system capacity | 180 mm center spacing | |
| Leg connection load | 80 kg per leg point | |
| Headboard lateral push resistance | 30 kg horizontal force at 1000 mm height | |
| Edge seating static load | 120 kg | |
| Durability cycling target | 10000 bed-entry cycles | |
| Color option count | 1 standard visible color |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Light beige woven fabric or leather-look material with visible sewn seams | |
|---|---|---|
| Headboard padding | Multi-layer foam and fiber wadding over a hard back panel | |
| Internal frame | Kiln-dried hardwood or engineered wood frame with 25 mm structural members | |
| Mattress support | Wooden slat platform or board base retained within the upholstered rails | |
| Support legs | Four black powder-coated metal legs with angled tapered design | |
| Joining hardware | Threaded bed bolts, corner brackets, and lock washers for headboard and rail assembly |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Sleeping support | Fixed platform bed accepts an 1800 x 2000 mm mattress without an additional footboard | |
|---|---|---|
| Head support | Two-piece pillow-top headboard provides padded back support for sitting upright in bed | |
| Assembly method | Knock-down headboard, side rails, foot rail, slat base, and four legs attach with bolts | |
| Floor clearance | 80 mm open under-bed gap permits robot vacuum passage and limited airflow |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Carton count | 3 cartons | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary residential use | Suitable for a modern main bedroom or large guest bedroom where a soft padded headboard and queen mattress are required | |
|---|---|---|
| Coordination recommendation | Pair with low-profile bedside cabinets, recessed wall panels, and warm ambient lighting |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1725 bed safety | Apply requirements for strength, durability, entrapment risks, and stability of domestic beds | |
|---|---|---|
| EN 1022 stability | Use seating and overturning test principles where headboard and edge-entry loads are evaluated | |
| EN 16777 bed mattress interface | Review dimensions, clearance, and support interface to ensure compatible mattress fit |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324 dimensional inspection | Apply to wooden furniture dimensional tolerances and workmanship if the internal frame and panels are wood-based | |
|---|---|---|
| GB/T 3325 safety and strength | Use for general wooden furniture mechanical safety, stability, and edge performance checks | |
| GB 18584 indoor furnishing limit | Use for formaldehyde release and soluble heavy-metal limits on wooden furniture components | |
| GB/T 10357 furniture testing | Use strength, durability, and stability test methods for beds and seating-related loading |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324 dimensional inspection: Apply to wooden furniture dimensional tolerances and workmanship if the internal frame and panels are wood-based; 2. GB/T 3325 safety and strength: Use for general wooden furniture mechanical safety, stability, and edge performance checks; 3. GB 18584 indoor furnishing limit: Use for formaldehyde release and soluble heavy-metal limits on wooden furniture components; 4. GB/T 10357 furniture testing: Use strength, durability, and stability test methods for beds and seating-related loading; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool