| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Table overall dimensions | 700 x 700 x 720 mm | |
|---|---|---|
| Table base diameter | 450 mm | |
| Table stem diameter at narrowest point | 80 mm | |
| Chair overall dimensions | 620 x 580 x 780 mm | |
| Chair seat height | 450 mm | |
| Chair seat depth | 430 mm | |
| Chair seat width | 520 mm | |
| Chair base diameter | 400 mm | |
| Chair backrest height above seat | 330 mm | |
| Table top thickness | 30 mm | |
| Chair shell wall thickness | 8 mm | |
| Knee clearance under table | 670 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Table net weight | 22 kg | |
|---|---|---|
| Table top static load capacity | 80 kg | |
| Set seating capacity | 2 persons per table | |
| Shell impact resistance | 10 kg drop from 1m height without cracking | |
| Surface scratch resistance | 2000 abrasion cycles without visible gloss loss | |
| Cushion compression set resistance | 40% | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table top | Fiberglass-reinforced unsaturated polyester with high-gloss white gel coat finish | |
|---|---|---|
| Table pedestal and base | Die-cast aluminum with white baked glossy paint finish | |
| Chair outer shell | Fiberglass-reinforced unsaturated polyester with high-gloss white gel coat finish | |
| Chair seat and back cushion core | 30mm thick 35kg/m³ high-resilience polyurethane foam | |
| Chair upholstery fabric | 1.2mm thick matte green polyurethane (PU) leather | |
| Chair pedestal and base | Die-cast aluminum with white baked glossy paint finish | |
| Base floor contact pads | 3mm thick non-slip EVA rubber pads | |
| Upholstery stitching | Polyester bonded thread with 8mm stitch pitch | |
| Table underside support plate | 3mm thick steel connecting plate welded to pedestal | |
| Chair cushion adhesive | Solvent-based neoprene adhesive bonding foam to FRP shell | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Chair design | Fixed-position wrap-around curved armchair with integrated armrests formed by the shell edge, no swivel or tilt mechanism | |
|---|---|---|
| Table configuration | Fixed round pedestal table with no folding or height adjustment, centered single leg provides unobstructed leg room around entire perimeter | |
| Seating comfort | Curved backrest provides 15 degrees of backward recline for relaxed posture during short conversations, padded seat cushions reduce pressure on thighs | |
| Floor protection | Fixed rubber pads on all bases glide smoothly without marking wood, tile or laminate flooring, no caster wheels for stable stationary placement | |
| Surface maintenance | High-gloss non-porous table and chair shell surfaces wipe clean with standard mild detergent, resistant to common beverage spills in public lounge areas | |
| Arrangement flexibility | Lightweight individual units can be rearranged quickly to form 2-person or 4-person discussion groups as needed in open lounge spaces | |
| Color option | Two-tone design with white structural shells and green upholstery creates high visual contrast suitable for modern public spaces | |
| Color finish | Two-tone design with white structural shells and green upholstery creates high visual contrast suitable for modern public spaces | |
| Stability performance | Wide flared pedestal base provides 15-degree tip resistance under normal seated user movement | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
Verified carton / gross weight / assembly / loading data
| Number of packages per set | 3 cartons | |
|---|---|---|
| Table package carton dimensions | 750 x 750 x 150 mm | |
| Single chair package carton dimensions | 650 x 600 x 800 mm | |
| Total set gross shipping weight | 45 kg | |
| Total shipping volume per set | 0.39 CBM | |
| Assembly time per set | 30 minutes | |
| 40ft HQ container loading capacity | 170 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Office open lounge areas | Suitable for informal employee break spaces and impromptu team discussions, compact 2-person footprint fits efficiently in open plan office zones | |
|---|---|---|
| Public reception waiting zones | Appropriate for office building lobbies, bank waiting areas and exhibition halls, bright two-tone design creates modern welcoming visual appeal | |
| Education campus common areas | Suitable for university student lounges, library discussion corners and canteen casual seating, durable molded shells resist heavy daily use | |
| Quick service cafe seating | Applicable for coffee shops and casual tea houses, pedestal design provides unobstructed leg room and easy floor cleaning around units | |
| Showroom and display spaces | Ideal for modern furniture showrooms and commercial property display suites, iconic mid-century tulip design adds contemporary aesthetic value | |
| Outdoor covered patio use | Suitable for semi-outdoor covered balconies and atriums when specified with weather-resistant PU upholstery, gel coat shells resist UV fading in indirect sunlight | |
| Covered semi-outdoor atrium use | Suitable for semi-outdoor covered balconies and indoor atriums, gel coat shells resist UV fading in indirect sunlight with weather-resistant PU upholstery | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| Furniture stability recommendation | EN 1022:2018 Furniture - Seating - Determination of stability, applicable to verify chair tip resistance during normal use | |
|---|---|---|
| Seating strength recommendation | EN 1728:2014 Furniture - Seating - Test methods for strength and durability, applicable for cyclic load testing of chair frames | |
| Table stability recommendation | EN 15372:2016 Furniture - Strength, durability and stability - Requirements for non-domestic tables, applicable for commercial grade table performance verification | |
| Surface finish recommendation | EN 12720:2009+A1:2013 Furniture - Assessment of surface resistance to cold liquids, applicable for spill resistance testing of glossy table and shell surfaces | |
| Seating stability recommendation | EN 1022:2018 Furniture - Seating - Determination of stability, applicable to verify chair tip resistance during normal use | |
| Seating durability recommendation | EN 1728:2014 Furniture - Seating - Test methods for strength and durability, applicable for cyclic load testing of chair frames |
Standards applicable to China-market projects
| General furniture mechanical safety recommendation | GB/T 3324General technical requirements for wooden furniture, applicable for structural stability and surface durability verification for public use | |
|---|---|---|
| Furniture seating strength recommendation | GB/T 10357.3Test of mechanical properties of furniture, strength and durability of chairs and stools, applicable for static load and impact testing of chair units | |
| Furniture table strength recommendation | GB/T 10357.1Test of mechanical properties of furniture, strength and durability of tables, applicable for table top load and base stability testing | |
| Furniture VOC emission recommendation | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and VOC emission verification for indoor use | |
| Furniture table general safety recommendation | GB/T 3324General technical requirements for furniture, applicable for structural stability and surface durability verification for public use | |
| Furniture harmful substance limit recommendation | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and VOC emission verification for indoor use |
This product must meet the following technical requirements: 1. General furniture mechanical safety recommendation: GB/T 3324General technical requirements for wooden furniture, applicable for structural stability and surface durability verification for public use; 2. Furniture seating strength recommendation: GB/T 10357.3Test of mechanical properties of furniture, strength and durability of chairs and stools, applicable for static load and impact testing of chair units; 3. Furniture table strength recommendation: GB/T 10357.1Test of mechanical properties of furniture, strength and durability of tables, applicable for table top load and base stability testing; 4. Furniture VOC emission recommendation: GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and VOC emission verification for indoor use; 5. Furniture table general safety recommendation: GB/T 3324General technical requirements for furniture, applicable for structural stability and surface durability verification for public use; 6. Furniture harmful substance limit recommendation: GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and VOC emission verification for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
