Product supplierDark Brown Faux Leather Reception Seating Set with Glass Tables, Dark brown faux leather with vertical pleated back stitching and tight tailoring
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2200 × 850 × 860 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Seating capacity | 5 persons | |
|---|---|---|
| Sofa total static load | 360 kg | |
| Single armchair static load | 140 kg | |
| Coffee table distributed top load | 40 kg | |
| Side table distributed top load | 25 kg | |
| Total set net weight | 118 kg | |
| Foam density for seat cores | 35 kg/m3 | |
| Foam rebound value | 35% | |
| Upholstery abrasion acceptance | 30000 Martindale cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Upholstery surface | Dark brown faux leather with vertical pleated back stitching and tight tailoring | |
|---|---|---|
| Seat cushioning | 140 mm high-resilience polyurethane foam over a rigid seat board | |
| Back cushioning | 110 mm polyurethane foam and fiber padding with segmented vertical channels | |
| Internal load frame | 30 mm hardwood-composite seat rails with steel corner braces | |
| Metal support finish | Polished stainless-steel square tube legs and table frames | |
| Table tops | 10 mm clear tempered glass with flat polished edges and small retaining clips |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | Fixed 3layout providing one sofa and two independent guest chairs | |
|---|---|---|
| Back support design | Vertical channel-tufted backrest distributes padding into separate lumbar zones | |
| Table function | Rectangular coffee table serves the sofa area while the square side table serves one armchair | |
| Floor protection | Open polished metal legs terminate in flat contact pads for stable placement on hard flooring |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive reception area | Five-seat configuration suits formal visitor waiting zones outside management offices | |
|---|---|---|
| Meeting lounge or VIP room | Dark brown upholstery and polished metal supports fit professional short-duration discussion areas |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applies to safety, strength, and durability verification for indoor seating used in contract environments | |
|---|---|---|
| EN 12721:2016 | Applies to structural durability testing of tables with glass tops and metal bases | |
| EN 12150-1:2015+A1:2019 | Applies to thermally toughened soda-lime-silicate safety glass used for table tops |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA E2-2017 (R2022) | Applicable standards and test results require confirmation | |
|---|---|---|
| ANSI/BIFMA E3-2019 (R2023) | Applies as an optional structural-performance basis for the freestanding occasional tables |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2024 | Applies to dimensional and structural quality checks for wooden-frame furniture used in the upholstered seating | |
|---|---|---|
| GB/T 10357.6-2013 | Applies to static load testing of single-seat and multi-seat sofa seating surfaces | |
| GB/T 28202-2020 | Applies to glass furniture material and safety verification for the tempered table tops |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2024: Applies to dimensional and structural quality checks for wooden-frame furniture used in the upholstered seating; 2. GB/T 10357.6-2013: Applies to static load testing of single-seat and multi-seat sofa seating surfaces; 3. GB/T 28202-2020: Applies to glass furniture material and safety verification for the tempered table tops; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool