| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Three-seater sofa overall dimensions | 2200 x 900 x 900 mm | |
|---|---|---|
| Single-seat armchair overall dimensions | 1100 x 900 x 900 mm | |
| Seat height from floor | 420 mm | |
| Seat depth per seating position | 580 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest total height above seat | 480 mm | |
| Armrest height above seat | 200 mm | |
| Solid wood arm cap width | 180 mm | |
| Integrated arm storage compartment dimensions (three-seater) | 300 x 300 x 150 mm | |
| Floor clearance under sofa base | 30 mm | |
| Backrest cushion segment height (upper lumbar) | 220 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set net weight | 185 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Seat foam density | 45 kg/m³ | |
| Back foam density | 35 kg/m³ | |
| Foam indentation force deflection (IFD) | 38 N | |
| Seam stitching tensile strength | 120 N | |
| Upholstery abrasion resistance (Martindale) | 50000 cycles | |
| Recommended daily use duration | 10 hours | |
| Product structural warranty | 5 years | |
| Total seating capacity width across three-seater | 1800 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | 1.2mm thick brown top-grain leather match (contact surfaces genuine leather, outer panels matching PU) | |
|---|---|---|
| Arm trim and storage panels | High-gloss lacquered solid red hardwood (rosewood veneer over MDF core) | |
| Internal load-bearing frame | Kiln-dried hardwood, 30mm thick structural members | |
| Seat cushion support base | 8mm thick sinuous spring suspension with 50mm elastic webbing | |
| Seat padding | High-density polyurethane foam wrapped in 20mm soft Dacron layer | |
| Back padding | Medium-density polyurethane foam with segmented lumbar padding | |
| Feet and base trim | Stained solid wood block feet, 30mm height | |
| Storage compartment interiors | 15mm thick melamine-lined particle board | |
| Upholstery stitching | High-strength bonded nylon thread, 8 stitches per inch | |
| Edge trim binding | 2mm thick matching PU edge binding along all upholstery seams | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Fixed position non-reclining design | All seats and backrests are fixed at upright 100-degree angle for formal meeting posture | |
|---|---|---|
| Integrated under-arm storage (three-seater sofa) | Two front-access storage compartments under each arm, suitable for storing remote controls, notepads or reception supplies | |
| Leveling block feet | Solid wood feet with fixed height, no adjustable glides visible, suitable for even hard office flooring | |
| Segmented back support | Backrest divided into three horizontal padded segments to provide neck, upper back and lumbar support | |
| Wide flat arm surfaces | Polished wood arm caps provide stable surface for placing drinks or small items during meetings | |
| Modular set configuration | Set includes one three-seat sofa and two matching single armchairs that can be arranged flexibly in reception spaces | |
| Stain-resistant upholstery finish | Leather/PU surface can be wiped clean with damp cloth for easy maintenance in high-traffic office areas | |
| Non-removable cushion design | Seat and back cushions are permanently attached to frame to maintain neat formal appearance | |
| Integrated under-arm storage (all units) | Two front-access storage compartments under each arm (6 total across set), 150mm internal depth, suitable for storing remote controls, notepads or reception supplies | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 3 | |
|---|---|---|
| Three-seater sofa carton dimensions | 2250 x 950 x 750 mm | |
| Single armchair carton dimensions (per unit) | 1150 x 950 x 750 mm | |
| Total set gross shipping weight | 210 kg | |
| Total shipping volume per set | 3.25 CBM | |
| Assembly time on site | 30 minutes | |
| 40HQ container loading quantity | 36 sets | |
| Inner packaging materials | EPE foam wrap, corner protectors, plastic film, cardboard outer carton | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Executive private offices | Formal traditional styling with wood trim matches professional executive office environments for seating visitors during meetings | |
|---|---|---|
| Corporate reception and waiting areas | Three-piece configuration provides ample seating for multiple guests in company lobbies and reception zones | |
| Boardroom ancillary seating | Can be placed around boardroom perimeters for additional seating during breaks or informal discussions | |
| Government and institutional office spaces | Conservative brown and wood finish aligns with formal decor requirements for government and public sector offices | |
| VIP lounge areas | Premium leather look and solid wood accents create upscale welcoming space for important guests and clients | |
| Recommended complementary furniture | Pair with matching dark wood executive desks, bookcases, and coffee tables for coordinated office suite design | |
| VIP visitor lounge areas | Premium leather finish and solid wood accents create an upscale welcoming space for important clients and distinguished guests; polished wood surfaces and neat upholstery maintain a professional polished appearance with minimal maintenance |
EU Market Access Requirements* EN Standards
| EN 13759:2011 | Domestic and contract furniture - Seating - Test methods for the determination of strength and durability, applicable for structural performance validation | |
|---|---|---|
| EN 1021-1:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, applicable for fire safety of upholstery | |
| EN 1021-2:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent, applicable for fire safety of upholstery |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood trim and frame components of this sofa set | |
|---|---|---|
| GB/T 16799-2008 | Furniture with leather, applicable to leather and leather-match upholstery performance and labeling | |
| GB 20400-2006 | Limit of harmful substances in leather and fur, applicable for formaldehyde and heavy metal content in upholstery materials | |
| GB/T 35607-2017 | General technical requirements for office furniture sofas, applicable for structural safety and performance of office use sofas |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood trim and frame components of this sofa set; 2. GB/T 16799-2008: Furniture with leather, applicable to leather and leather-match upholstery performance and labeling; 3. GB 20400-2006: Limit of harmful substances in leather and fur, applicable for formaldehyde and heavy metal content in upholstery materials; 4. GB/T 35607-2017: General technical requirements for office furniture sofas, applicable for structural safety and performance of office use sofas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
