| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seat sofa overall dimensions | 1850 x 820 x 780 mm | |
|---|---|---|
| Single armchair overall dimensions | 900 x 800 x 780 mm | |
| Coffee table overall dimensions | 1200 x 600 x 450 mm | |
| Seat height from floor (all seating units) | 420 mm | |
| Seat depth (all seating units) | 580 mm | |
| Backrest height from seat surface | 400 mm | |
| Armrest height from floor (all seating units) | 620 mm | |
| Chrome support leg cross-section | 50 x 50 mm | |
| Coffee table lower shelf height | 150 mm | |
| Armrest width (each seating unit) | 80 mm | |
| Coffee table glass thickness | 10 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest cushion thickness | 100 mm | |
| Knee clearance under coffee table | 300 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm |
Net weight / load capacity / users / durability
| 3-seat sofa net weight | 72 kg | |
|---|---|---|
| Per-seat static load capacity (all seating) | 160 kg | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Recommended maximum occupancy (3-seat sofa) | 3 adults | |
| Recommended occupancy (single armchair) | 1 adult per unit | |
| Seat cushion indentation load deflection | 45 kgf | |
| Foam rebound rate | 40 % | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and backrest cushion padding | 45 kg/m³ high-density polyurethane foam | |
|---|---|---|
| Seating upholstery | 1.2 mm thick black polyurethane (PU) faux leather | |
| Seating inner frame | 25 mm thick kiln-dried hardwood composite frame | |
| Seating decorative and support trim | Polished chrome-plated cold-rolled steel | |
| Coffee table support frame | 1.2 mm thick polished chrome-plated square steel tubing | |
| Coffee table shelf surfaces | Tempered black safety glass with polished edges | |
| Seat base support | 8 mm thick elastic webbing suspension | |
| Frame foot pads | Non-marking PVC floor protection glides | |
| Seam stitching | Polyester-bonded thread with 8 mm stitch pitch | |
| Backrest internal support | 4 mm thick hardboard backing panel | |
| Chrome finish layer thickness | 0.08 mm chrome plating over nickel undercoat | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board |
Adjustment / rotation / tilt / mobility / storage features
| Fixed-position seating design | All seat and backrest angles are pre-set to 105 degree recline for relaxed upright waiting posture, no tilt or recline adjustment mechanisms | |
|---|---|---|
| Two-tier coffee table storage | Top tier supports beverage service and small personal items, lower open shelf provides accessible storage for reading materials, brochures and small office items | |
| Floor protection design | All metal legs include non-marking glides to prevent scuffing and scratching on tile, concrete, wood and commercial carpet flooring | |
| Easy-clean surface performance | Faux leather upholstery and tempered glass surfaces may be wiped clean with standard non-abrasive commercial cleaning products for quick maintenance in high-traffic areas | |
| Modular arrangement flexibility | Seating units are freestanding, allowing custom layout configurations including linear row, L-shape or paired seating to fit different reception area dimensions | |
| Integrated arm support | Wide padded armrests on all seating units provide stable arm support and act as a visual boundary between adjacent seats | |
| Anti-tip structural design | All seating units have a 600 mm wide leg base footprint to prevent tipping when occupants lean against armrests or backrests, meeting commercial furniture stability requirements | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Total shipping package count | 5 packages | |
|---|---|---|
| Largest package dimensions (3-seat sofa) | 1880 x 850 x 680 mm | |
| Single armchair package dimensions | 930 x 830 x 680 mm | |
| Coffee table package dimensions (frame + glass) | 1230 x 630 x 180 mm | |
| Total shipping gross weight | 170 kg | |
| Total shipping volume (CBM) | 2.1 CBM | |
| Assembly time for full set | 60 minutes | |
| 40ft HQ container loading quantity (full sets) | 56 sets | |
| 20ft GP container loading quantity (full sets) | 22 sets | |
| Required assembly hardware count | 36 pieces |
Recommended spaces / users / usage modes
| Corporate office reception areas | Suitable for waiting areas outside executive offices, main lobbies and visitor entry zones, providing formal, professional seating for visiting clients and guests | |
|---|---|---|
| Public service waiting spaces | Appropriate for government service halls, bank branch waiting areas and professional service offices, with easy-clean surfaces that withstand regular high-volume public use | |
| Small business meeting lounge zones | Can be used in informal internal meeting areas and breakout spaces for short collaborative discussions and team check-ins | |
| Recommended matching configuration | Pair with the included 2-tier coffee table to create a complete reception set, positioned 300mm from seating edges to allow easy leg room and access to placed items | |
| Flooring compatibility | Suitable for installation on hard commercial flooring including polished concrete, tile, laminate and low-pile office carpet, with integrated floor glides preventing surface damage | |
| Healthcare facility waiting annexes | Suitable for non-clinical waiting areas in dental offices, clinics and medical centers, with non-porous surfaces compatible with hospital-grade disinfection wipes | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Office furniture structural strength recommendation | EN 16139:2013 | |
|---|---|---|
| Furniture surface fire resistance recommendation | EN 1021:2014 | |
| Tempered glass furniture recommendation | EN 12150:2015 | |
| Surface durability recommendation | EN 14465 |
US and Canada office-furniture standards
| Lounge seating durability recommendation | ANSI/BIFMA X2020 | |
|---|---|---|
| Occasional table performance recommendation | ANSI/BIFMA X2019 |
Standards applicable to China-market projects
| Tempered glass safety recommendation | GB 15763.2 | |
|---|---|---|
| Formaldehyde emission recommendation | GB 18584 | |
| Upholstered furniture fire safety recommendation | GB 20286 | |
| Hardware corrosion resistance recommendation | GB/T 3325 |
This product must meet the following technical requirements: 1. Tempered glass safety recommendation: GB 15763.2; 2. Formaldehyde emission recommendation: GB 18584; 3. Upholstered furniture fire safety recommendation: GB 20286; 4. Hardware corrosion resistance recommendation: GB/T 3325; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
