| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set layout dimensions | 3200 x 2500 x 850 mm | |
|---|---|---|
| 3-seater sofa overall dimensions | 1800 x 750 x 850 mm | |
| Single armchair overall dimensions | 650 x 700 x 850 mm | |
| Coffee table overall dimensions | 1200 x 700 x 450 mm | |
| Seat height (sofa and chairs) | 450 mm | |
| Seat depth (all seating) | 500 mm | |
| Backrest height (all seating) | 450 mm | |
| Armrest height above seat | 220 mm | |
| Cantilever frame base footprint | 600 mm front-to-back | |
| Coffee table lower shelf height | 150 mm | |
| Coffee table glass top thickness | 12 mm | |
| Seat cushion thickness | 80 mm | |
| Backrest padding thickness | 40 mm | |
| Seam stitch pitch | 8 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Lumbar Support Zone Height | 240 mm |
Net weight / load capacity / users / durability
| Total set net weight | 145 kg | |
|---|---|---|
| Single chair static load capacity | 150 kg | |
| Seating upholstery abrasion resistance | 50000 Martindale cycles | |
| Seat foam density | 40 kg/m³ | |
| Frame static load cycle rating | 100000 load cycles | |
| Applicable number of seated users | 5 people | |
| Seat foam rebound rate | 45% | |
| Back foam density | 30 kg/m³ | |
| Floor glide abrasion durability | 25000 sliding cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | Black PU faux leather, 1.2mm thickness | |
|---|---|---|
| Seat core padding | High-density polyurethane foam, 60mm thickness | |
| Backrest padding | Medium-density polyurethane foam, 40mm thickness | |
| Seating frame and armrests | 1.8mm thick cold-rolled steel tube, matte black powder-coated finish | |
| Armrest pads | Integral wrapped PU padding matching seat upholstery | |
| Coffee table top and lower shelf | 12mm thick tempered black glass, polished edges | |
| Coffee table support frame | 1.5mm thick chrome-plated square steel tube | |
| Frame foot pads | Non-slip plastic floor glides | |
| Seating internal support board | 12mm thick high-density particleboard, moisture-resistant treatment | |
| Seating frame and armrest supports | 1.8mm thick cold-rolled steel tube, matte black powder-coated finish | |
| Armrest top pads | Integral wrapped PU padding matching seat upholstery, 10mm padding thickness | |
| Frame connecting hardware | Zinc-plated steel bolts and locking nuts, corrosion-resistant coating |
Adjustment / rotation / tilt / mobility / storage features
| Cantilever frame flex | Controlled 10-degree backward flex under seated load without adjustment levers | |
|---|---|---|
| Integrated armrest support | Fixed padded armrests aligned to 220mm above seat for elbow support | |
| Coffee table open storage | Fixed lower black glass shelf for storage of reading materials or refreshments | |
| Floor protection | Non-marking plastic glides on all frame feet to prevent scratching hard flooring | |
| Seating configuration flexibility | Single chairs can be repositioned independently around the sofa and table | |
| Table surface function | Smooth non-porous glass top suitable for serving drinks and displaying reception materials | |
| Assembly requirement | Partial assembly required for attaching seat/back units to frames and connecting table frame components | |
| Frame stability | Cantilever frame design with 600mm front-to-back footprint prevents tipping under 150kg static load applied 50mm from front seat edge | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Total number of shipping cartons | 5 cartons | |
|---|---|---|
| Largest carton dimensions (3-seater sofa) | 1850 x 780 x 350 mm | |
| Single chair carton dimensions | 680 x 720 x 200 mm | |
| Coffee table carton dimensions | 1250 x 750 x 150 mm | |
| Total shipment gross weight | 170 kg | |
| Total shipment CBM | 0.72 m³ | |
| On-site assembly time | 60 minutes | |
| 20ft GP container loading quantity | 32 sets | |
| Per-carton hardware kit | 1 kit per seating/table unit, including assembly tools and illustrated instruction manual | |
| 40ft HQ container loading quantity | 78 sets |
Recommended spaces / users / usage modes
| Corporate office reception areas | Suitable for waiting areas and visitor lobbies, formal black finish matches professional commercial interiors | |
|---|---|---|
| Executive office meeting zones | Suitable for small informal meeting spaces outside executive suites, accommodates up to 5 visitors | |
| Public institution waiting rooms | Suitable for government, bank or service center waiting areas, durable construction meets high-traffic requirements | |
| Small business meeting rooms | Suitable for compact meeting spaces where informal seating is preferred around a central table | |
| Recommended maintenance | Wipe clean faux leather and glass surfaces with mild detergent, suitable for daily high-use environments | |
| Temporary visitor briefing spaces | Suitable for factory or site office visitor briefing areas, scratch-resistant glides work with concrete, tile or vinyl commercial flooring without surface damage | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Office seating safety recommendation | EN 16139:2013 | |
|---|---|---|
| Furniture glass safety recommendation | EN 12150:2015 | |
| Furniture surface emission recommendation | EN 16516:2017 |
US and Canada office-furniture standards
| Lounge seating performance recommendation | ANSI/BIFMA X2020 |
|---|
Standards applicable to China-market projects
| Upholstered furniture safety recommendation | GB 28007 | |
|---|---|---|
| Tempered glass safety recommendation | GB 15763.2 | |
| Furniture mechanical performance recommendation | GB/T 3324 | |
| Upholstery leather performance recommendation | GB/T 16799 |
This product must meet the following technical requirements: 1. Upholstered furniture safety recommendation: GB 28007; 2. Tempered glass safety recommendation: GB 15763.2; 3. Furniture mechanical performance recommendation: GB/T 3324; 4. Upholstery leather performance recommendation: GB/T 16799; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
