Product supplierUpholstered Three-Seat Lounge Sofa with Square Arms and Metal Legs, Woven polyester-blend textile over the entire visible seat, arms and back
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2200 × 900 × 750 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 52 kg | |
|---|---|---|
| Recommended total static load | 300 kg | |
| Single-seat static load | 120 kg | |
| Seating capacity | 3 persons | |
| Backrest lateral load | 90 kg per seat position | |
| Fabric abrasion acceptance | 50,000 Martindale cycles | |
| Foam indentation hardness | 38 kg/m3 seat foam density | |
| Back cushion foam density | 30 kg/m3 | |
| Daily use cycle target | 100,000 seat-and-rise cycles | |
| Structural warranty acceptance | 5 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Woven polyester-blend textile over the entire visible seat, arms and back | |
|---|---|---|
| Seat cushion | High-resilience polyurethane foam, 160 mm thick, wrapped with soft fiber | |
| Back cushions | Dual fiber-wrapped foam cushions, 140 mm thick, in matching fabric covers | |
| Inner frame | Kiln-dried hardwood and engineered-board structural frame with screwed joints | |
| Support legs | Four black powder-coated steel legs with a slim rectangular profile | |
| Seat suspension | Elastic webbing deck over timber rails beneath the foam cushion |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating layout | Continuous three-seat open lounge configuration without center arm dividers | |
|---|---|---|
| Back support | Fixed low back with two removable matching cushion pads | |
| Floor support | Rigid metal-leg base with open under-seat clearance of 100 mm | |
| Placement use | Freestanding placement with fully upholstered front and arms |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary space | Open office lounges, collaboration zones and hospitality waiting areas | |
|---|---|---|
| Recommended pairing | Face the sofa with armchairs and a low oval coffee table |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool